Library

Report detailing natural ventilation and passive airflow systems.

This research study used pollutant measurements, home inspections, diagnostic testing and occupant surveys to assess IAQ in 24 new or deeply retrofitted homes designed to be high performance green buildings in California.

Site showing flame spread ratings and definitions for common building materials.

Article from Building Science Corporation explaining 'wash and wear buildings' that are designed to be flooded and washed out afterwards.

Article describing the correct installation of clothes dryer exhaust ducts.

PDF detailing the inspection and verification guidance for WaterSense labeled new homes including indoor and outdoor efficiency requirements, and homeowner and building management education.

Report providing general guidelines for the installation of rolled erosion control products.

Fact sheet describing the newly developed Ventilation-Integrated Comfort System (VICS) that reduces space requirements and eliminates costly ductwork for separate heating, cooling, and ventilation systems, all while enhancing performance, addressing the demand for energy-efficient homes, and...

Report describing the results of a 21-home field study investigating the effectiveness and failure rates of whole-house mechanical ventilation systems installed in Florida homes over the last 15 years.

Report covering reservoir claddings, back ventilation and vapor throttles.

Report discussing how to create livable space in the attic that meets IRC code requirements by either creating a ventilated roof assembly, or and unvented attic assembly.

Blog article citing the risks and downsides of attic ventilation fans from a building science perspective.

Report targeting the growing number of homes utilizing deep retrofit measures and new construction practices to realize sufficiently lower infiltration levels that require mechanical ventilation as prescribed by ASHRAE Standard 62.2.

EPA’s 2008 Lead-Based Paint Renovation, Repair and Painting (RRP) Rule (as amended in 2010 and 2011), aims to protect the public from lead-based paint hazards associated with renovation, repair and painting activities.

PDF literature review of the impact and need for attic ventilation in Florida homes.

News article describing the state of the residential battery storage market.

Report focusing on managing the driving forces that move air and water vapor across the building envelope.

Webpage featuring hundreds of illustrations of masonry construction details for brick, congrete, stone, tile, stucco, etc.

Report describing the use of passive vents as a source of outdoor air in multifamily buildings.

This document addresses adding—or improving—mechanical ventilation systems to existing homes. The purpose of ventilation is to remove contaminants from homes either directly or by dilution. This report discusses where, when, and how much ventilation is appropriate in a home, including some...

Guide describing proper application, design, and installation of mechanical ventilation cooling systems for homes located in hot-dry and cold-dry climates, as well as a means of understanding the benefits, costs, and tradeoffs of these systems.

Report describing the most cost-effective ventilation and indoor air quality solutions for multifamily homes that meet ASHRAE 62.2-2016.

Standard establishing a test procedure for evaluating the performance of air-cleaning devices as a function of particle size. This is the current version of the standard, which was published in the year 2017, and is available for preview and purchase at the reference link. The ASHRAE bookstore also...

FEMA mitigation assessment team report following Hurricane Charley in Florida including observations, recommendations, and technical guidance for retrofitting hurricane-damaged homes.

FEMA mitigation assessment team report following Hurricane Ivan in Florida and Alabama including observations, recommendations, and technical guidance.

EPA guidance document providing information on moisture control in buildings.

Document describing a hygrothermal modeling study, including all of the US climate zones, a range of interior humidity levels and numerous arrangements and types of insulation.

Brochure discussing specific practices for mitigating moisture and mold during the construction process.

Online course describing mold and mold remediation for environmental and public health professionals.

Document describing common questions about moisture, mold, and wood.

Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow. Results indicate that utilizing air-permeable fibrous fill insulations in unvented...

Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow; results indicate that utilizing air-permeable fibrous fill insulations in unvented...

Article describing mulch requirements and benefits.

Pamphlet describing different types of mulches and their benefits.

Research study examining the performance of existing multifamily ventilation central systems and explored alternative solutions in retrofit situations.

Information sheet with nail withdrawl capacities in OSB.

DOE Energy Saver webpage providing a brief summary of natural ventilation for houses.

Document describing recommended modeling rules, potential compliance credits, and eligibility criteria for residential night ventilation cooling systems for California’s Title 24 energy efficiency standards.

Newsletter providing news and information to members of the New Jersey National Guard.

Fact sheet providing guidance on alternative building materials and techniques in coastal environments, including Engineered Wood Products, SIPs, ICFs, Prefabricated Shear Walls and Moment Frames, Sprayed Closed-Cell Foam Insulation, Advanced Wall Framing, and Modular Houses; also published in FEMA...

Fact sheet describing a novel, simplified air delivery system using a plug-and-play model that features 3-inch diameter flexible ducts, efficient fittings, and a simplified installation process that resulted in successful market engagement through commercialization.

A fact sheet educating the public on how to appropriately ground portable generators and the hazards associated with their use.

Standards for paints and coatings.

Report describing a field study to measure pollutant concentrations in 324 homes in California.

Article from Smarter Homes NZ on home building techniques that incorporate passive cooling.

Book describing passive cooling techniques from a technical and academic perspective.

Website providing guidance on passive heating, cooling, and lighting methods.

Article from Williams College on the key elements of passive solar design for homes.

Paper summarizing passive and low-energy cooling systems for buildings.