Library

Report examining the structural properties and applications of an innovative studless building system, detailing its testing regime and providing an engineering guide for architects and engineers.

Fact sheet poster describing how to add exterior, continuous, rigid insulation to the exterior walls when replacing siding on an existing home.

Report on the design and evaluation of extended plate and beam.

Case study on the design and evaluation of extended plate and beam, located in Mount Joy Pennsylvania.

Report covering moisture and leakage issues associated with spray foam insulation application to the underside of roof sheathing.

Document presenting some of the key technical properties of many of the most common building materials.

Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.

Article describing correct ways to attach rigid insulation to the exterior of commercial and residential buildings.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...

Document presenting step-by-step process for installing rigid insulating sheathing over wood studs or house wrap.

Report on high-R wall design called extended plate and beam that uses foam sheathing insulation with wall framing.

Article from NREL on wall construction guidelines for homes in hot climate zones.

Research study describing the impact resistance performance of advanced framed wall systems with insulating sheathing as the primary sheathing from wind blown debris.

Case study about how to properly tape insulating sheathing drainage planes.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

This page provides important information on how to protect yourself and your family if you suspect that you might have vermiculite insulation from Libby, Montana.

Conference paper describing testing of the performance of fasteners used to attach rigid foam insulation to the exterior of walls.

Article describing the evolution of the IRC to permit class 3 vapor retarders (latex paint) in walls coupled with exterior continuous insulation to allow drying and reduce condensation risk.

Case study about a structural sheathing product composed of enhanced EPS rigid foam with OSB adhered on one side.

Information sheet about types and installation of insulation.