Library

Code describing energy codes for energy-conserving and compliant designs in Florida.

Article describing methods for thermally isolating a garage in a Passive House-certified multifamily building.

Vinyl siding estimating and installation guide for vinyl siding products.

Radiant, hydronics, geothermal -- they are a vital part of modern comfort and energy solutions. ACCA helps hydronics contractors operate at peak performance.

Guide describing advanced framing, a system of construction framing techniques designed to optimize material usage and increase energy efficiency.

Article describing recessed lighting, which if installed incorrectly may contribute to air leakage and compromise building envelope efficiency.

Standard establishing the minimum whole-building energy performance requirements for energy efficient residential buildings.

Article Describing methods for thermally isolating multifamily parking garages.

The Builder's Guide provides the building industry with the latest and best practical information on how to apply building science principles to structures as systems in hot-humid climate regions.

Website providing CAD files and drawings of advanced framing details.

Document outlining building science principles about air flow, heat flow and moisture flow in homes.

An article discussing how different metal roof materials and attachment methods affect the ability of the roof to thermally expand and contract and the durability of different solutions.

A website describing a list of common vocabulary used when describing light bulbs.

A simple three-step guide for homeowners who are looking to replace existing light bulbs with more energy-efficient, higher-performing bulbs.

Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.

A website explaining how to quickly clean up a broken compact fluorescent lightbulb.

Research study investigating the energy performance and cost effectiveness of several state-of-the-art retrofit strategies that could be used in residential houses in the Boston and New England area.

A website explaining the various shades of light, from warm to cool colors, with a visual diagram illustrating the various shades of light.

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. Walls with...

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height.

Website providing building science based guidance and training for residential construction.

Article describing research encouraging use of exterior insulation to warm interior sheathing surfaces in walls and roof assemblies to reduce the likelihood of condensation during cold weather

Report focusing on building envelopes that have been enhanced with phase change materials (PCMs), which can simultaneously reduce total cooling loads and shift peak-hour loads.

Job Process sheet for the manufactured housing industry showing how to cut insulation batts to fit wall cavities in a factory production environment.

Guidance document on deep energy retrofits.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Source Energy and Carbon Decisions chapter helps users carefully assess the impacts of switching from gas to electricity for heating end-uses, using source energy and/or carbon emissions...

Website discusses differences between CFL and LED bulbs.

Information about dense pack, cellulose insulation.

The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.

Report on problems and solutions with EIFS stucco wall cladding systems.

Discussion of structural thermal resistance.

A FAQ explaining the purpose of the Energy Independence and Security Act, a law which sets energy efficiency standards for lightbulbs.

Article from NAHB research center describing home building techniques for homes in hot climate zones.

Website from the U.S. Department of Energy providing consumers with information on saving energy and using renewable energy technologies.

Webpage on the ENERGY STAR website that list products that exceed the ENERGY STAR minimum criteria for their category, with links to several product categories, including windows, HVAC, home appliances, and computer monitors.

Website for finding rebates and special offers near you on ENERGY STAR certified products. Products that earn the ENERGY STAR label meet strict energy-efficiency specifications set by the U.S. EPA helping you save energy and money while protecting the environment.

Information sheet with details on a building enclosure designed for Albuquerque, NM, as an example for building enclosures built for hot-dry and mixed-dry climates.

Information sheet that summarizes Insulated Concrete Form (ICF) construction including advantages and disadvantages of this construction strategy.

Report on the field evaluation of whole-building approaches and estimation of the relative contributions of select technologies toward reducing energy use related to space conditioning in new manufactured homes.

Research report assessing the moisture and cooling load impacts of airtightness and mechanical ventilation in homes in hot-humid climates.

Fact sheet defining a grid-interactive efficient building and its benefits.

Document that gives a step-by-step approach for designing attachments for cladding materials through foam sheathing.

Report discussing the potential energy savings of new high-efficiency downlights, and the results of product testing to date.

Report providing information about techniques and approaches to improve the efficiency of recessed lighting.

Video course by the Lighting Controls Association presenting an overview of the basic functionality of today’s lighting controls, benefits and the basic questions to ask when identifying an appropriate lighting control strategy

Research study describing field testing performed in 32 two-story Florida homes to characterize wind washing failures of the house air and thermal boundary.

Article discussing the downside to recessed can lights.

A website explaining the measurement of light bulbs, measurable in lumens, & brightness levels that ENERGY STAR products produce.

A website explaining the basics of LED lightning, their lifespan, their use in general lighting applications, the amount of heat produced, and why you should choose ENERGY STAR certified LED products for your home.