Library

2012 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

2012 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

2015 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

Fact sheet providing an overview of FEMA P-348, Protecting Building Utility Systems From Flood Damage.

The manual covers residential zoning issues - multiple, single-zone, and central multi-zone systems - and includes advice on working with homeowners to adapt the heating or cooling system design to meet modern home design features.

This Standard establishes the minimum requirements to evaluate a residence with regards to energy efficiency, water conservation, occupant comfort, and indoor air quality.

Report analyzing design heating load sizing methods for superinsulated homes in cold climates and comparing them to the actual energy usage to determine if the building load calculation methodology should be changed for calculating the design heating load of these homes.

Webpage describing different types of appliance thermometers, how they work, and how they should be used by homeowners.

Report on a simplified test procedure for combustion safety that is easier to implement and should produce fewer false positives than the previous procedure.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Source Energy and Carbon Decisions chapter helps users carefully assess the impacts of switching from gas to electricity for heating end-uses, using source energy and/or carbon emissions...

Report detailing the value of a smart range hood (SRH) that was developed as part of a project aimed at addressing indoor air quality (IAQ) health risks by targeting key pollutants in residential kitchens, with a focus on being consumer-friendly, quiet, effective, and efficient, meeting established...

The main principle of smart ventilation used in this study is to shift ventilation from time periods with large indoor-outdoor temperature differences, to periods where these differences are smaller, and their energy impacts are expected to be less.

ENERGY STAR Key product criteria for dishwashers.

Website from the U.S. Department of Energy providing consumers with information on saving energy and using renewable energy technologies.

Report describing research that helps inform best practices for air-sealing multifamily buildings in the Northeast.

Web article describing the evolution of evaporative coolers, water usage of evaporative coolers, and links to information on selecting an evaporative cooler.

Article describing benefits of ECM motors and how they can be installed as retrofit motors in HVAC equipment.

Report on the performance of range hood exhaust fans.

Documents describing Flood Resistant Provisions of the international codes (including the international building, residential, exiting building, mechanical, plumbing, fuel gas, fire, swimming pool and spa, private sewage disposal, and code council performance codes) and summaries of changes from the...

Document describing ASCE 24-14 Flood Resistant Design and Construction changes and highlights, on topics including siting, materials, performance, and utilities.

Report on the field evaluation of whole-building approaches and estimation of the relative contributions of select technologies toward reducing energy use related to space conditioning in new manufactured homes.

ENERGY STAR article on finding a refrigerator or freezer recycling program.

Calculator helping users determine cost savings of refrigerator replacement.

Guide describing refrigeration leaks, including common leak points, how to fix them, and how to prevent them.

Report presenting construction methods, building products, appliances and equipment of four single-family houses that achieve dramatic energy reductions and approach “net zero energy” use.

Report providing the results of an analysis of humidity control and variable refrigerant flow (VRF) system efficiency in three new multifamily buildings in New York, NY.

Report on whole-house and spot ventilation strategies for improved indoor air quality.

Report on the long-term performance of mini-split heat pumps.

If your kitchen has a powerful exhaust fan, it may be pulling air down your chimney or water-heater flue.

Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

Guide describing proper application, design, and installation of mechanical ventilation cooling systems for homes located in hot-dry and cold-dry climates, as well as a means of understanding the benefits, costs, and tradeoffs of these systems.

Web resource that lays out the pre-work considerations, methods and finishes for installing mechanical insulation.

Guide describing flood protection measures for utility systems, including mechanical, electrical, plumbing, and fuel.

Webpage by the Department of Energy describing how to adjust refrigerator temperature settings to store food and drinks safely, keep food from spoiling, prevent illness from the growth of bacteria, and reduce food waste.

Report evaluating mechanical AC precooling strategies in homes as a method for improving the load factor by shifting cooling operation from on-peak to off-peak hours.

Resource to help builders better understand the WaterSense requirements for labeled homes and assist them in meeting the criteria so they can receive the label for their new construction.

Article describing how replacing permanent split capacitor (PSC) motors with electronically commutated motors (ECM) can boost bottom line for HVAC contractors as well as improve customer comfort and satisfaction.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2016, and is available for...

Resource manual for builders, designers, architects, plumbers, and others interested in the WaterSense Labeled Homes Program providing an overview of the program, explains how to meet the program requirements, gives descriptions of water-saving technologies, and provides links to further resources.

Paper that illustrates a performance check between the thermal performance of a Massive Insulating Concrete Form (ICF) wall system mocked up and Whole Building Performance criteria such as total space heating and cooling loads (thermal comfort).

Report on a project conducted to better understand the current usage of thermostatic radiator valves by key market players in steam and hot water heating and to conduct limited experiments on the effectiveness of new and old thermostatic radiator valves as a means of controlling space temperatures...

Website providing consumer tips for using natural gas safely in the home, including guidance on cooking, fireplaces, ventilation, pilot lights, piping, etc.

Documents describing Flood Resistant Provisions of codes published by the International Association of Plumbing and Mechanical Officers (IAPMO): the Uniform Mechanical Code; Uniform Plumbing Code; Uniform Swimming Pool, Spa and Hot Tub Code; and Uniform Solar, Hydronics and Geothermal Code (Uniform...

Fact sheet describing the results of an analysis of humidity control and variable refrigerant flow (VRF) system efficiency in three new multifamily buildings in New York, NY.

Web page providing links or specifications for homes to be labeled through the U.S. Environmental Protection Agency’s (EPA’s) WaterSense program.

Fact sheet describing the requirements for EPA WaterSense certified dishwashers that highlights water cycle specifications, efficiency code standards, water consumption level relation to criteria, the advantages of ENERGY STAR dishwashers, and the regulations for building and verifying a labeled...

Fact sheet describing protocols for detecting, addressing, and preventing water leaks in homes, covering pressure-loss testing, visual inspections, and specific leak tests for fixtures and appliances.

Fact sheet describing the requirements for EPA WaterSense certified kitchen faucets that highlights flow rate specifications, efficiency code standards, local requirements, faucet types and regulations for building and verifying a labeled faucet to ensure it meets the quality and water management...

Fact sheet describing how to effectively build, implement, and verify leak detection and flow monitoring systems, detailing appropriate devices, installation procedures, and verification protocols.

Fact sheet describing the importance and regulation of EPA WaterSense water softeners including the function of cation exchange water softeners, the importance of salt efficiency, the negative impact of hard water on household appliances, softeners that use demand-initiated regeneration with...