Library

Report on adding insulation to load-bearing mass masonry buildings.

A book about structurally insulated panels.

Web based tool providing decision-making guidance for selecting wall assembly components.

Document presenting some of the key technical properties of many of the most common building materials.

Website of the Cold Climate Housing Research Center.

Article describing correct ways to attach rigid insulation to the exterior of commercial and residential buildings.

Article describing the difference between conditioned or unvented attics and unconditioned or vented attics.

Case study describing foundation wall moisture studies at a research facility in Minnesota run by Building America team NorthernSTAR.

The New York State Energy Research and Development Authority (NYSERDA) is interested in finding cost-effective solutions for deep energy retrofits (DERs) related to exterior wall insulation in a cold climate, with targets of 50% peak load reduction and 50% space conditioning energy savings.

Report of a field evaluation of four novel roof designs to see how each design would reduce space-conditioned energy use so that the knowledge gained could be applied to the design of new manufactured homes.

Report assessing slab-on-grade foundation insulation energy savings.

Article from Montana State University Extension explaining how proper insulation techniques can greatly reduce the risks of ice dams on roofs in cold climate zones.

Video describing how a frost-protected shallow foundation (FPSF) is constructed and including use of a stay-in-place EPS (expanded polystyrene) footing form that provides insulation and simplifies the installation of frost-protected monolithic concrete slab foundations.

Video describing how a frost-protected shallow foundation (FPSF) is constructed and including use of a stay-in-place EPS (expanded polystyrene) footing form that provides insulation and simplifies the installation of frost-protected monolithic concrete slab foundations.

Siding installation guide for Ply Gem Siding Group products.

This Measure Guideline provides design and construction information for a deep energy enclosure retrofit solution of a flat roof assembly.

Report on two approaches to retrofitting existing double-stud walls.

Report describing a deep energy enclosure retrofit solution for insulating mass masonry buildings from the interior.

Report describing wall assemblies that use layers of rigid exterior insulation thicker than 1-½ inch and require a secondary cladding attachment location exterior to the insulation.

Report describing the use of mineral fiber insulating sheathing in a high performance enclosure retrofit package.

This page provides important information on how to protect yourself and your family if you suspect that you might have vermiculite insulation from Libby, Montana.

Report describing the costs, benefits, and challenges of attic insulation retrofits in HUD-code manufactured homes.

This standard specification covers the classification, composition, physical properties, and dimensions of mineral fiber (rock, slag, or glass) blanket intended for use as thermal insulation on surfaces at various temperature ranges. This version of the standard was published in the year 2019 and is...

Article describing thermal bridging, construction practices that encourage thermal bridging, and solving thermal bridging through continuous exterior insulation.

Guide providing information on controlling attic ductwork sweating.