Library

Article describing methods for thermally isolating a garage in a Passive House-certified multifamily building.

Report about a project that examines implementation of advanced retrofit measures in the context of a large-scale weatherization program and the archetypal Chicago, Illinois, brick bungalow.

Report identifying housing characteristics and energy use for fifteen single-family housing types and specifies measure packages that provide an optimum level of energy savings based on a BEopt analysis.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 in. thick over the WSP, and a cladding system installed over the foam sheathing in low...

Research study examining the opportunities for cost-effective energy efficiency and renewable energy retrofits in residential archetypes constructed before 1980 (Pre-Code) in 14 U.S. cities.

Document providing descriptions of the many insulation options available to homeowners, along with guidance on where, when, and how to install insulation throughout your house.

Expert Meeting about interior insulation retrofit of mass masonry wall assemblies held on July 30, 2011.

Journal article describing lessons learned from updating a 16-year-old deep-energy retrofit.

Report outlining the energy upgrade package implemented in Ft. Benning, GA, Indianhead Townhomes project and the findings of the Southface Energy Institute's post-renovation analysis.

Report covering the fire performance of combustible cladding over combustible insulation.

Blog entry describing methods for insulating basement walls on the interior or exterior.

Article describing issues with condensation in unvented attics insulated with open-cell spray foam.

Fact sheet describing principles of insulating steam distribution and condensate return lines as an effective way to prevent energy loss.

Report about a two-year study intended to document the energy performance of a house in each sub-metered area and compare the performance to modeled predictions and to assess the thermal comfort performance of the single point mini-split heat pump.

Document describing good practices for insulating basements in new and existing homes.

Document providing information on basement insulation, air sealing and water management retrofits.

Information sheet providing information on installing Rigid XPS foam board insulation to existing brick masonry walls.

Report summarizing the importance of properly insulating and air sealing masonry walls, providing step by step instructions and approaches.

Document developed to help residential new construction builders transition from using a three-coat stucco system to a one-coat stucco system installed over 1 in. of expanded polystyrene (EPS) insulation.

Document providing renovators and retrofit contractors an overview of considerations when including wall air sealing and insulation in an energy retrofit project.

Web resource that lays out the pre-work considerations, methods and finishes for installing mechanical insulation.

Report demonstrating cost-effective energy savings targets as well as improved comfort and indoor environmental quality associated with deep energy retrofits by a large public housing authority as part of a larger rehabilitation effort.

Report providing information about improving the energy efficiency and long-term durability of the buildings that are being reconstructed post Katrina in New Orleans.

Presentation describing RESNET grading criteria for insulation installation.

Report describing how modification of model specifications to include guidance on energy efficiency measures can create a greater level of consistency in executing energy efficiency retrofit measures across the multiple regions where a developer may work.

Report describing construction of test homes in Atlanta, GA meeting Building America savings targets and serving as a basis of design for other homes Martin Dodson plans to build within the Serenbe community.

How hard can it be to insulate a flat sheet of concrete? I mean you only have three choices – on the top, on the bottom, or on the edge. OK, you might have some combination of the three as well.

Factsheet describing the use of rigid foam insulation to meet energy efficiency requirements and minimize fire risks.

Conference paper describing testing of the performance of fasteners used to attach rigid foam insulation to the exterior of walls.

Research study determining how well high performance envelope and innovative cooling system interact to cost effectively reduce cooling energy use in this hot-dry climate.

Research study making several recommendations to whole-home program designers and implementers for improving the cost effectiveness and reach of whole-home programs.

Article describing the evolution of the IRC to permit class 3 vapor retarders (latex paint) in walls coupled with exterior continuous insulation to allow drying and reduce condensation risk.

Information sheet about types and installation of insulation.

Presentation describing the challenges of insulating an existing basement, presented to the Building America residential energy-efficiency stakeholder meeting.

Report covering the migration of wind-blown embers in roof vents.

Report describing work conducted by the Building Science Corporation (BSC) Building America Research Teams Energy Efficient Housing Research Partnerships project.