Library

2009 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

2009 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

2012 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

2015 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

2018 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

Federal statistics about national energy consumption in residential homes in 2020

Article describing vapor retarder requirements in the International Residential Code and International Building Code 2021.

Report providing builders in the hot-dry and mixed-dry climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Article describing thermal bridging, construction practices that encourage thermal bridging, and solutions.

Guide for homeowners describing how to find and seal basement and attic air leaks, determine if attic insulation is adequate, make improvements safely, and reduce energy bills.

Report describing testing and analysis on deep energy retrofits of existing single-family homes in the U.S.

Document outlining the current and the proposed draws and estimates typical ratings changes from draw specification changes for typical systems in four cities.

Article describing methods for thermally isolating a garage in a Passive House-certified multifamily building.

Fact sheet poster describing how to add exterior, continuous, rigid insulation to the exterior walls when replacing siding on an existing home.

Specifications for water heating systems designed to advance higher performing electric and gas heat pump water heaters.

Voluntary specification for residential, commercial/multifamily, and industrial water heaters and heating systems.

Specification sheet for residential, commercial, multifamily, and industrial water heaters and heating systems.

Technical report describing the SPS (Structural Panel System), an innovative implementation of the "perfect wall" concept, situating environmental control layers on the exterior side of structural components for improved constructability, cost-effectiveness, and performance, validated through the...

Website article interviewing the inventor of the Larsen truss, a history of its use, and a discussion of its advantages and disadvantages.

Article about different types of weather resistant barrier.

Report that collected field data from a whole-home program in Illinois are utilized to compare marketplace-installed measures to the energy saving optimal packages previously developed for 15 housing types.

Report on adding insulation to load-bearing mass masonry buildings.

Report about a building project in the marine climate.

Technical report describing the thermal performance of 40 common building envelope details for mid- and high-rise buildings, including analyses to optimize energy efficiency and reduce thermal bridging.

Report focused on foundation insulation R-values for cold climates and the design, construction, and performance implications.

Report describing methodology, analysis, and findings from a case study of a 110-unit retrofit of gas tankless water heaters in a hot/humid climate in Alachua County, Florida.

Report about a project that examines implementation of advanced retrofit measures in the context of a large-scale weatherization program and the archetypal Chicago, Illinois, brick bungalow.

This report outlines research activities that are expected to facilitate the adoption of energy retrofits by remodeling contractors and roofing contractors using retrofit panels which applicable to many existing house designs in most climates and markets.

Article describing the building science implications of insulating vented or unvented attics.

Article describing the research into insulating vented versus unvented attics.

SPFA website signup page to access SPFA documents.

Report describing approaches to insulating basements in homes built to meet Energy Star levels of performance of heat loss reduction.

Information sheet describing techniques for insulating basements.

Report summarizing commissioning, short-term testing, utility bill data analysis, and results of on-site monitoring of a deep energy retrofit.

Article describing how demand plumbing systems send cold water back to the water heater until hot water arrives at the sink, shower or other fixture where it is needed.

Report describing the best practices for the safe, efficient, and compliant installation of residential air source heat pump water heaters (HPWH) in California, aligning with the state's climate goals and providing guidance for educators, installers, and industry stakeholders.

Case study describing solar thermal and photovoltaic systems in new construction.

Article explaining the importance of regular inspections of boiler systems in maintaining their safety, lifespan, and efficiency.

Brochure explaining the essential basis for advanced framing and some of the more common advanced framing details.

Information sheet about insulating slabs.

Information sheet providing recommendations on the installation of vapor control layers.

Article describing selecting insulation for minimizing condensation risks.

Case study describing solar thermal and photovoltaic systems in new construction.

A book about structurally insulated panels.

Case study about Artistic Homes of Albuquerque, New Mexico, the first home builder in the United States to offer true net zero energy construction to the average home buyer on every home it builds.

Case study describing solar thermal and photovoltaic systems in new construction.

Web based tool providing decision-making guidance for selecting wall assembly components.

This report will review, and summarize the current state of understanding and research into enclosures with higher thermal resistance, so-called “High-R Enclosures.” Recommendations are provided for further research.

Research study describing a number of promising foundation and basement insulation strategies that can meet the requirement for better thermal control in colder climates while enhancing moisture control, health, and comfort.

Website with consumer and contractor information about building codes and regulations for solar water heating systems.