Library

Article describing methods for insulating and air sealing vented and unvented roofs in various climates zones.

Document describing good practices for insulating basements in new and existing homes.

Project discussing buried or encapsulated ducts and their pros and cons.

This Measure Guideline provides design and construction information for a deep energy enclosure retrofit solution of a flat roof assembly.

Report on two approaches to retrofitting existing double-stud walls.

Report describing a deep energy enclosure retrofit solution for insulating mass masonry buildings from the interior.

Document providing information on basement insulation, air sealing and water management retrofits.

Report describing wall assemblies that use layers of rigid exterior insulation thicker than 1-½ inch and require a secondary cladding attachment location exterior to the insulation.

Information sheet providing information on installing Rigid XPS foam board insulation to existing brick masonry walls.

Report summarizing the importance of properly insulating and air sealing masonry walls, providing step by step instructions and approaches.

Document covering the technical aspects of buried and insulated ducts (BEDs), as well as the advantages, disadvantages, and risks of BEDs compared to alternative strategies.

Report describing the use of mineral fiber insulating sheathing in a high performance enclosure retrofit package.

Document developed to help residential new construction builders transition from using a three-coat stucco system to a one-coat stucco system installed over 1 in. of expanded polystyrene (EPS) insulation.

Document providing renovators and retrofit contractors an overview of considerations when including wall air sealing and insulation in an energy retrofit project.

Study investigating measured cooling energy savings in homes across the U.S. from the installation of roofing with higher solar reflectance.

Web resource that lays out the pre-work considerations, methods and finishes for installing mechanical insulation.

Website providing medical information about malignant mesothelioma, a cancer related to asbestos exposure.

A presentation describing the standards regarding who is responsible for what part of the design to ensure the roof truss is properly designed and braced.

An installation training manual discussing the installation of metal roofing materials and related accessories, for both new construction and retrofit projects.

A Recovery Advisory guide reccomending practices for designing and installing metal roof systems that will enhance wind resistance in high-wind regions (i.e., greater than 90-miles per hour [mph] gust design wind speed).

Report covering the selection of roof vents for rainwater resistance.

This report requires all elements of rooftop PV panel systems to be designed for component and cladding pressures per ASCE 7-10.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

EPA guidance document providing information on moisture control in buildings.

Report about exterior sheathing insulation and inward driven moisture issues.

Report explaining moisture-related concerns for high R-value wall assemblies and discusses past Building America research work that informs this study.

The next generation of building enclosures is a key step toward achieving high-performance goals through decreasing energy load demand and enabling advanced space-conditioning systems. Yet the adoption of high-R enclosures and particularly high-R walls has been a slow-growing trend because...

Report on the use of vapor diffusion ports to reduce moisture issues with buried ductwork in unvented attics in hot-humid climates.

Report describing evaluation of several configurations of wall assemblies to determine the accuracy of moisture modeling and make recommendations to ensure durable, efficient assemblies.

Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow. Results indicate that utilizing air-permeable fibrous fill insulations in unvented...

Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow; results indicate that utilizing air-permeable fibrous fill insulations in unvented...

Standard covering overs mounting systems, including mounting devices, clamping devices and ground lugs for use with photovoltaic modules and panels and contains requirements for ground-mounted and roof systems as part of a nonstructural building component.

Report providing guidance to air-sealing multifamily homes.

Report demonstrating cost-effective energy savings targets as well as improved comfort and indoor environmental quality associated with deep energy retrofits by a large public housing authority as part of a larger rehabilitation effort.

Guide providing information on controlling attic ductwork sweating.

A document providing guidance on integrating a PV array with a roof system.

Report studying the specification, implementation, and energy savings from an EER in a group home, with an energy savings goal of 30%.

Study examining how design features, such as building envelope openings and compartmentalization, affect the wind pressure in typical low-rise buildings with gable and hip roofs.

Report highlighting the evaluation methods used and extent of wind washing found in a study analyzing wind washing in thirty-two two-story homes.

Report presenting the results of a study evaluating retrofit solutions for addressing the effects of wind washing on homes.

Report covering wind loading on roofing assemblies.

Article from Smarter Homes NZ on home building techniques that incorporate passive cooling.

Report providing information about improving the energy efficiency and long-term durability of the buildings that are being reconstructed post Katrina in New Orleans.

Report providing information about improving the energy efficiency and long-term durability of the buildings that are being reconstructed post Katrina in New Orleans.

Technical report describing research aimed to provide window manufacturers with foundational guidance for installing windows in walls with continuous insulation (CI), addressing critical aspects such as evaluating common installation methods, establishing acceptance criteria for window performance...

Article outlining moisture accumulation in open cell spray polyurethane foam.

Large scale simulation study investigating the effects of cool roofs and walls on buildings of various vintages across the U.S., with special attention given to California.

Research study exploring a test method measuring air leakage between units through common surfaces and air infiltration across exterior, noncommon surfaces of the enclosure.

Report reviewing the design and the first four months of energy performance of a near zero energy project home in Callaway, Florida during the second half of 2008.

Website providing guidance on how to reduce the risk of damage to a home from hail.