Library

Research study describing a number of promising foundation and basement insulation strategies that can meet the requirement for better thermal control in colder climates while enhancing moisture control, health, and comfort.

Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

Document presenting some of the key technical properties of many of the most common building materials.

Document containing recommendations on how to brace roofs and gable end walls based on lessons learned from analyzing the destruction from hurricane Andrew.

Guide informing builders and developers about efficient building practice for constructing homes with structural insulated panels.

Reference investigating the strategy of using buried and/or encapsulated ducts to reduce duct thermal losses in residential buildings.

Report describing a deep energy retrofit project for a two-family wood framed home located in Belmont, Massachusetts.

Article describing correct ways to eliminate water damage by incorporating a sacrificial layer to foundation walls and footings.

Website of the Cold Climate Housing Research Center.

Information sheet with information about insulating and ventilating attics.

Fact sheet describing changes made to the 2010 Florida Building Code with regards to wind design loads and requirements.

Case study characterizing the framing factors for the exterior walls, ceilings, and floors of 180 wood-framed low-rise residential buildings across the United States.

Report identifying housing characteristics and energy use for fifteen single-family housing types and specifies measure packages that provide an optimum level of energy savings based on a BEopt analysis.

Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.

Article describing correct ways to attach rigid insulation to the exterior of commercial and residential buildings.

Fact sheet describing the characteristics that make for a successful coastal residential building, including design and construction recommendations; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Report describing retrofitting options and methodology for architects, developers, and property owners to use when making decisions about retrofits for common building types in NY.

Report providing tools and resources to help community planners to improve coastal resilience.

Volume II of a two-volume report providing a comprehensive approach to design, construction, and renovation of homes located in coastal environments.

Article summarizing the IBHS stance on building practices that can mitigate the impact of high winds and storm surge on structures.

Research study describing an experimental and theoretical investigation of the energy and hygrothermal performance of retrofit foundation insulation systems in climate zones 6 and 7.

Report on heating and cooling air-distribution ducts that are insulated, installed close to the ceiling in a vented attic and covered with attic insulation to minimize energy loss.

Information guide describing issues with concrete floors, in multiple climate zones.

Report covering insulating crawlspaces.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 in. thick over the WSP, and a cladding system installed over the foam sheathing in low...

Article describing construction best practices to help reduce the wind-induced pressure loads on a low-rise building during a hurricane.

Document presenting step-by-step process for installing rigid insulating sheathing over wood studs or house wrap.

Article describing research encouraging use of exterior insulation to warm interior sheathing surfaces in walls and roof assemblies to reduce the likelihood of condensation during cold weather

Research report anayzing the results of a large retrofit project, turining an old school into near zero energy consumption apartments in Greenfield MA.

Article describing the difference between conditioned or unvented attics and unconditioned or vented attics.

Research study examining the opportunities for cost-effective energy efficiency and renewable energy retrofits in residential archetypes constructed before 1980 (Pre-Code) in 14 U.S. cities.

Information sheet about crawlspace insulation, including installation details.

Article discussing whether or not to seal and insulate crawlspaces.

Job Process sheet for the manufactured housing industry showing how to cut insulation batts to fit wall cavities in a factory production environment.

Article describing the importance of air sealing, insulation, and roof ventilation in reducing the likelihood of ice dam formation on roofs in cold snowy climates.

Report covering exterior energy retrofits of masonry buildings.

FEMA risk management series guide on hospital safety and resilience to natural disasters.

Guide informing architects and engineers about designing buildings to be constructed with structural insulated panels.

Report providing information on ways to incentivize funding of hazard mitigation programs.

Website helping communities address coastal issues with data, tools, and training resources.

A guide on the use of rain barrels for greater water efficiency and use in gardens and lawns.

Information about dense pack, cellulose insulation.

Article describing the difference between swales and hugels (berms used to create soil from woody debris).

Information sheet with HVAC duct insulation, testing, maintenance and performance information.

Designer checklist covering hazards involving ground and surface water, rain and water vapor, HVAC and plumbing, sunlight, insects, decay, and natural hazards, and builder checklist covering all disaster resistance, sorted by building component.

Case study describing foundation wall moisture studies at a research facility in Minnesota run by Building America team NorthernSTAR.

A book describing how to complete an earthquake retrofit plan for wood-frame residential buildings.

Article presenting a numerical study of wind pressure on the low-rise hip-roof building by varying the roof pitch using computational fluid dynamics computer modeling and wind tunnel testing of hip roofs with different roof pitches: 15°, 20°, 30° and 40°.