Library

Article explaining installing cavity insulation.

Fact sheet describing principles of insulating steam distribution and condensate return lines as an effective way to prevent energy loss.

A guide for users and energy raters of insulated siding as home insulation.

Article describing how insulated siding can save homeowners energy by providing continuous exterior insulation.

Website providing builders with information about meeting RESNET Grade 1 criteria when installing insulation.

Article outlining the use of spray polyurethane foam in residential buildings.

Research study describing field testing performed in 32 two-story Florida homes to characterize wind washing failures of the house air and thermal boundary.

Report discussing how to create livable space in the attic that meets IRC code requirements by either creating a ventilated roof assembly, or and unvented attic assembly.

The purpose for this document is to provide basic guidance on the use of proven installation techniques that can be used by installers to help ensure correct “dense pack” application of JM Spider® in drill & fill applications.

Article describing walls and moisture development on them.

Article from University of Arizona on keeping homes cool during extreme heat, both personal and system changes.

Information sheet providing links and resources for insulating basements in cold climates.

Article discussing the downside to recessed can lights.

Website providing information about Knauf Insulation.

Website describing the wildland-urban interface code and providing links to resources.

Test results used by multiple structural insulated panel manufacturers confirming a one-hour fire rating for specific SIP assemblies.

Guide for homeowners describing actions they can take to modify their home and the surrounding site to create a survivable space to reduce the amount of damage a home would likely experience during a wildfire.

Article describing lessons for builders and changes to local building code in Colorado Springs in response to regional wildfires.

Report about a two-year study intended to document the energy performance of a house in each sub-metered area and compare the performance to modeled predictions and to assess the thermal comfort performance of the single point mini-split heat pump.

A webpage outlining CAL FIRE’s recommendations for creating defensible space.

Guidebook providing useful examples of high performance retrofit techniques for the building enclosure of wood frame residential construction in a cold and somewhat wet climate.

Siding installation guide for Ply Gem Siding Group products.

Article describing methods for insulating and air sealing vented and unvented roofs in various climates zones.

Document describing good practices for insulating basements in new and existing homes.

Project discussing buried or encapsulated ducts and their pros and cons.

This Measure Guideline provides design and construction information for a deep energy enclosure retrofit solution of a flat roof assembly.

Report on two approaches to retrofitting existing double-stud walls.

Report describing a deep energy enclosure retrofit solution for insulating mass masonry buildings from the interior.

Document providing information on basement insulation, air sealing and water management retrofits.

Report describing wall assemblies that use layers of rigid exterior insulation thicker than 1-½ inch and require a secondary cladding attachment location exterior to the insulation.

Information sheet providing information on installing Rigid XPS foam board insulation to existing brick masonry walls.

Report summarizing the importance of properly insulating and air sealing masonry walls, providing step by step instructions and approaches.

Document covering the technical aspects of buried and insulated ducts (BEDs), as well as the advantages, disadvantages, and risks of BEDs compared to alternative strategies.

Report describing the use of mineral fiber insulating sheathing in a high performance enclosure retrofit package.

Document developed to help residential new construction builders transition from using a three-coat stucco system to a one-coat stucco system installed over 1 in. of expanded polystyrene (EPS) insulation.

Document providing renovators and retrofit contractors an overview of considerations when including wall air sealing and insulation in an energy retrofit project.

Web resource that lays out the pre-work considerations, methods and finishes for installing mechanical insulation.

Website providing medical information about malignant mesothelioma, a cancer related to asbestos exposure.

Report providing a resource that communities can use to identify and evaluate a range of potential mitigation actions for reducing risk to natural hazards and disasters.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

EPA guidance document providing information on moisture control in buildings.

Report about exterior sheathing insulation and inward driven moisture issues.

Report explaining moisture-related concerns for high R-value wall assemblies and discusses past Building America research work that informs this study.

The next generation of building enclosures is a key step toward achieving high-performance goals through decreasing energy load demand and enabling advanced space-conditioning systems. Yet the adoption of high-R enclosures and particularly high-R walls has been a slow-growing trend because...

Report on the use of vapor diffusion ports to reduce moisture issues with buried ductwork in unvented attics in hot-humid climates.

Report describing evaluation of several configurations of wall assemblies to determine the accuracy of moisture modeling and make recommendations to ensure durable, efficient assemblies.

Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow. Results indicate that utilizing air-permeable fibrous fill insulations in unvented...

Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow; results indicate that utilizing air-permeable fibrous fill insulations in unvented...

Report providing guidance to air-sealing multifamily homes.