Library

A presentation describing the standards regarding who is responsible for what part of the design to ensure the roof truss is properly designed and braced.

A Recovery Advisory guide reccomending practices for designing and installing metal roof systems that will enhance wind resistance in high-wind regions (i.e., greater than 90-miles per hour [mph] gust design wind speed).

Report covering the selection of roof vents for rainwater resistance.

Factsheet describing smart practices for minimizing damage to residential electrical service components during coastal and riverine flood events.

Standard using performance-based principles to determine dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, earthquake, wind, and fire loads, and their combinations for general structural design. This version of the standard was published in the year 2016 and is available in both digital...

Standard using performance-based principles to determine dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, seismic, and wind loads, and their combinations for general structural design. The current version of this standard was published in the year 2022 and is available in both digital...

Standard using performance-based principles to determine dead, live, soil, flood, snow, rain, atmospheric ice, earthquake, and wind loads, and their combinations for general structural design. This version of the standard was published in the year 2010 and is available in both digital and print...

FEMA mitigation assessment team report following Hurricane Charley in Florida including observations, recommendations, and technical guidance for retrofitting hurricane-damaged homes.

FEMA report describing findings from an investigation of Hurricane Ike in Texas and Louisiana and residential construction recommendations based on those findings.

FEMA Mitigation Assessment Team Report describing damages from Hurricane Michael in Florida in Oct. 2018 and recommendations for future hurricane preparedness.

Report providing a resource that communities can use to identify and evaluate a range of potential mitigation actions for reducing risk to natural hazards and disasters.

This report requires all elements of rooftop PV panel systems to be designed for component and cladding pressures per ASCE 7-10.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

EPA guidance document providing information on moisture control in buildings.

Report about exterior sheathing insulation and inward driven moisture issues.

Report explaining moisture-related concerns for high R-value wall assemblies and discusses past Building America research work that informs this study.

The next generation of building enclosures is a key step toward achieving high-performance goals through decreasing energy load demand and enabling advanced space-conditioning systems. Yet the adoption of high-R enclosures and particularly high-R walls has been a slow-growing trend because...

Report on the use of vapor diffusion ports to reduce moisture issues with buried ductwork in unvented attics in hot-humid climates.

Report describing evaluation of several configurations of wall assemblies to determine the accuracy of moisture modeling and make recommendations to ensure durable, efficient assemblies.

Worker guidance from EPA, HUD, NIH, and OSHA on how to deal with mold in homes following natural disasters.

Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow. Results indicate that utilizing air-permeable fibrous fill insulations in unvented...

Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow; results indicate that utilizing air-permeable fibrous fill insulations in unvented...

List of products approved by the Master Painters Institute.

Report providing guidance to air-sealing multifamily homes.

Brochure outlining what is covered under the National Flood Insurance Program

Glossary of terms used by the National Flood Insurance Program

Resources describing the National Flood Insurance Program's technical bulletins for flood zone construction, including foundation walls, corrosion protection, floodproofing, and breakaway walls among other topics.

Website providing information on tsunamis, earthquakes, tornadoes, hurricanes, thunderstorms and more.

A website issuing watches, warnings, forecasts, and analyses of hazardous tropical weather and increasing the understanding of hazards.

The Saffir-Simpson Hurricane Wind Scale is a 1 to 5 rating based on a hurricane's sustained wind speed.

Report updating and expanding on a 2005 study that found, among other things, that every $1 of natural hazard mitigation funded by FEMA between 1993 and 2003 saved the American people an average of $4 in avoided future losses.

Website containing USGS-related publications related to natural hazards.

Report describing the interactions, both positive and negative, between common green building practices and the robustness of residential buildings to withstand natural hazards.

DOE Energy Saver webpage providing a brief summary of natural ventilation for houses.

Guide for electrical systems design including installation guidance and best practices for flood-prone areas.

Guide for fuel systems design including installation guidance and formulas for calculating loads and buoyancy forces for specifying number, type and capacity of strapping for hold-downs in flood-prone areas.

Article describing a steel connector product for jack rafter connections.

Webpage presenting updated maps for annual average temperature and precipitation in the contiguous U.S.

Report for local governments, planners, emergency managers, developers, insurers, and property owners describing ways to improve the wildfire resistance of buildings, infrastructure and communities in the wildland urban interface.

Report demonstrating cost-effective energy savings targets as well as improved comfort and indoor environmental quality associated with deep energy retrofits by a large public housing authority as part of a larger rehabilitation effort.

Document describing guidance and requirements for flood openings in walls at and below grade.

An NFPA Standard that identifies a method for determining the minimum water supply necessary for structural fire-fighting purposes in areas where it has been determined that there is no water or inadequate water for fire fighting.

NFPA standard for design and installation of indoor automatic fire sprinkler systems.

NFPA standard for indoor automatic fire sprinkler design and installation, focused on residential dwellings.

NFPA standard for indoor automatic fire sprinkler design and installation for low-rise residential occupancies.

An NFPA standards document that provides minimum requirements for the design, construction, installation, and maintenance of tanks and accessory equipment that supply water for private fire protection.

An NFPA standard for inspection, testing, and maintenance of fire sprinklers, including fire pump operation and flow tests, evaluation techniques such as sprinkler inspections, valve status tests, internal piping assessments, and forward flow tests for backflow preventers, and water storage system...

This standard provides a benchmark for safe electrical design, installation, and inspection to protect people and property from electrical hazards and has been adopted in all 50 states.

Standard establishing criteria for levels of health care services or systems based on risk to the patients, staff, or visitors in health care facilities to minimize the hazards of fire, explosion, and electricity.

A nine-part fact sheet covering a variety of common questions surrounding wildfires and how to make a home more resilient to wildfires.