Library

California Office of the State Fire Marshal's homepage for the Building Materials Listing Program, providing builders, contractors, architects, and others with access to a database of fire alarm systems and fire-resistant construction materials including roof coverings, wall, ceiling, and floor...

California Office of the State Fire Marshal's compiled and searchable list of different building materials and their test results for fire resistance.

Document presenting some of the key technical properties of many of the most common building materials.

Document detailing how to build radon-resistant homes.

Guide informing builders and developers about efficient building practice for constructing homes with structural insulated panels.

Reference investigating the strategy of using buried and/or encapsulated ducts to reduce duct thermal losses in residential buildings.

Report describing a deep energy retrofit project for a two-family wood framed home located in Belmont, Massachusetts.

Article describing correct ways to eliminate water damage by incorporating a sacrificial layer to foundation walls and footings.

Article describing the principle of capillarity in construction materials.

Book describing Carpentry and Construction, Construction Materials, Hand Tools, Power Tools, Construction Equipment, Jobsite Safety, and Working Conditions, Building Design and Print reading, Inspections Survey Instruments and Operations, Foundation and Outdoor Slab Construction, Floor, Wall, and...

Website of the Cold Climate Housing Research Center.

Information sheet with information about insulating and ventilating attics.

Document with information from a workshop addressing framing materials for residential buildings in California. A copy of the document can be requested at the resource link, and an online copy of the document can be found by searching for it on the California Energy Commission's Library Online...

Case study characterizing the framing factors for the exterior walls, ceilings, and floors of 180 wood-framed low-rise residential buildings across the United States.

Report identifying housing characteristics and energy use for fifteen single-family housing types and specifies measure packages that provide an optimum level of energy savings based on a BEopt analysis.

Document providing guidance about choosing the correct caulk for a project.

Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.

Article describing correct ways to attach rigid insulation to the exterior of commercial and residential buildings.

Research study describing an experimental and theoretical investigation of the energy and hygrothermal performance of retrofit foundation insulation systems in climate zones 6 and 7.

Report on heating and cooling air-distribution ducts that are insulated, installed close to the ceiling in a vented attic and covered with attic insulation to minimize energy loss.

Information guide describing issues with concrete floors, in multiple climate zones.

Information sheet discussing the properties and benefits of insulating concrete forms.

Report covering insulating crawlspaces.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 in. thick over the WSP, and a cladding system installed over the foam sheathing in low...

Document presenting step-by-step process for installing rigid insulating sheathing over wood studs or house wrap.

Article describing research encouraging use of exterior insulation to warm interior sheathing surfaces in walls and roof assemblies to reduce the likelihood of condensation during cold weather

Research report anayzing the results of a large retrofit project, turining an old school into near zero energy consumption apartments in Greenfield MA.

Article describing the difference between conditioned or unvented attics and unconditioned or vented attics.

Research study examining the opportunities for cost-effective energy efficiency and renewable energy retrofits in residential archetypes constructed before 1980 (Pre-Code) in 14 U.S. cities.

Technical bulletin addressing surfacing options in regards to composite wood panels and their emission barrier capabilities.

Information sheet about crawlspace insulation, including installation details.

Article discussing whether or not to seal and insulate crawlspaces.

Webpage from FireSafe Marin explaining the different landscaping strategies near homes to lower the risk of a home's ignition from wildfire.

Fact sheet describing guidance for choosing appropriate materials and using proper construction practices when rebuilding, repairing, or renovating a home to increase its resistance to fires.

Job Process sheet for the manufactured housing industry showing how to cut insulation batts to fit wall cavities in a factory production environment.

Article describing the importance of air sealing, insulation, and roof ventilation in reducing the likelihood of ice dam formation on roofs in cold snowy climates.

Article describing the causes of wood decay and moisture issues.

Article from Stephen L. Quarles on fire resistant decking design and materials recommendations.

Report covering exterior energy retrofits of masonry buildings.

Article from The Home Energy Community of Practice on designing energy efficient homes in hot climate zones, including home orientation, window location, and roof design considerations.

Guide informing architects and engineers about designing buildings to be constructed with structural insulated panels.

Information about dense pack, cellulose insulation.

Report covering the rainwater performance of building assemblies.

Information sheet with HVAC duct insulation, testing, maintenance and performance information.

Case study describing foundation wall moisture studies at a research facility in Minnesota run by Building America team NorthernSTAR.

Webpage from U.S. Department of Energy describing using Earth-Sheltered home building techniques in hot climate zones.

Report on problems and solutions with EIFS stucco wall cladding systems.

Report outlining the steps of translating a new home construction scope of work (SOW) to SOW for retrofit.