Library

Article describing utility rates, net metering policies, installation costs, financial incentives, and other info for both consumers who are interested in installing renewable energy systems and for energy justice and clean energy advocates.

Fact sheet describing best strategies to bring ductwork on single-story homes with a slab-on-grade foundation in hot, dry climates into the conditioned envelope of the home intending to highlight the pros and cons of multiple ductwork integration strategies, including traditional duct systems in...

The research report outlines a practical and cost-effective strategy utilizing central HVAC systems to optimize humidity control and ventilation in energy-efficient homes located in hot-humid climates, demonstrating significant improvements without requiring complex equipment upgrades.

Study from Appalachian State University on passive solar design to take advantage of local climate zones for energy conservation.

Article describing recessed lighting, which if installed incorrectly may contribute to air leakage and compromise building envelope efficiency.

Technical report describing how the FSEC Energy Research Center explores low-cost space-conditioning upgrades for existing homes by integrating centrally located, high-efficiency ductless mini split heat pumps with older but functional central space conditioning systems, aiming to achieve energy...

Standard providing a methodology for evaluating the installation quality of unitary HVAC systems.

Report covering moisture and leakage issues associated with spray foam insulation application to the underside of roof sheathing.

Power Point PDF presentation on historical architecture in New Mexico

Report describing the business case of hosting a Level 2 electric vehicle (EV) charging station in New York, including analysis of real-world data on equipment use, costs, revenue, and assumptions derived from industry reports and original research.

This report outlines research activities that are expected to facilitate the adoption of energy retrofits by remodeling contractors and roofing contractors using retrofit panels which applicable to many existing house designs in most climates and markets.

DOE report characterizing market and technical barriers impeding broader utilization of fault detection technology for residential HVAC energy efficiency applications.

Report describing approaches to insulating basements in homes built to meet Energy Star levels of performance of heat loss reduction.

Report describing the best practices for the safe, efficient, and compliant installation of residential air source heat pump water heaters (HPWH) in California, aligning with the state's climate goals and providing guidance for educators, installers, and industry stakeholders.

Information sheet about insulating slabs.

Fact sheet providing background and technical information on Trombe wall design

Report summarizing research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Marine Climate Region on a cost-neutral basis.

This report will review, and summarize the current state of understanding and research into enclosures with higher thermal resistance, so-called “High-R Enclosures.” Recommendations are provided for further research.

Webpage explaining how to site and orient a house to take advantage of the solar path.

Reference investigating the strategy of using buried and/or encapsulated ducts to reduce duct thermal losses in residential buildings.

Online tool for thermal comfort calculations and visualizations SoftwareX 12, 100563 https://doi.org/10.1016/j.softx.2020.100563

Installation manual for installing metal panel siding.

Climate Consultant is a software tool for helping architects, builders, contractor, homeowners, and students to understand their local climate.

An article illustrating common errors found in fiber cement siding installations. Many of these errors and poor flashing examples apply to siding materials beyond fiber cement siding.

Manual assisting architects, engineers, owners and roofing contractors for designing, specifying and installing roof tiles in areas of snow and ice.

Installation manual describing proper installation practices, industry standards and the code requirements of roofing tiles.

Article about how mortar droppings during the installation of a brick veneer can clog the weep holes in the wall assembly causing moisture damage. The article also illustrates products that can be installed in the ventilated cavity to mitigate this problem.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...

Website providing building science based guidance and training for residential construction.

Document presenting step-by-step process for installing rigid insulating sheathing over wood studs or house wrap.

Article describing research encouraging use of exterior insulation to warm interior sheathing surfaces in walls and roof assemblies to reduce the likelihood of condensation during cold weather

Information sheet about crawlspace insulation, including installation details.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Lessons Learned chapter focuses on successful deep energy retrofit projects throughout the U.S.

Website for the U.S. DOE Solar Decathlon competition.

Information about dense pack, cellulose insulation.

Study testing the effect of fan cooling on healthy adults at increased ambient temperatures.

Document providing descriptions of the many insulation options available to homeowners, along with guidance on where, when, and how to install insulation throughout your house.

ENERGY STAR factsheet describing the HVAC Quality Installation Program

Section 608 establishes EPA’s National Recycling and Emission Reduction Program designed to reduce emissions related to maintaining, servicing, repairing, and disposing of air conditioning or refrigeration equipment.

Brochure providing information on the design of the EPA Region 8 headquarters in Denver, CO.

Case study on exhaust ventilation and corresponding outdoor air intake strategies implemented in high-performance new-construction multifamily buildings.

Report about an experimental evaluation conducted on a night sky cooling system designed to substantially reduce space cooling needs in homes in North American climates.

The New York State Energy Research and Development Authority (NYSERDA) is interested in finding cost-effective solutions for deep energy retrofits (DERs) related to exterior wall insulation in a cold climate, with targets of 50% peak load reduction and 50% space conditioning energy savings.

Technical report describing the impact of orientation on thermal comfort.

Article describing EV charging, charger features, and other considerations for picking and installing EV chargers.

Factsheet describing how to install air source heat pumps for residential heating and cooling in cold climates.

Factsheet describing how to install air source heat pumps for residential heating and cooling in cold climates.

A article about the best practice method of installing fiber cement siding, to install flashing at the butt joints of the siding boards, rather than face caulking the butt joints afterwards.

Report describing the advantages and best practices for installing heat pump water heaters (HPWH), highlighting their improved energy efficiency, reliability, and critical considerations such as condensate management, proper sizing, and optimal installation location to enhance performance and...

Article from Washington Post on passive cooling measures for homes during extreme heat.