Library

Factsheet describing how to install air source heat pumps for residential heating and cooling in cold climates.

Factsheet describing how to install air source heat pumps for residential heating and cooling in cold climates.

A article about the best practice method of installing fiber cement siding, to install flashing at the butt joints of the siding boards, rather than face caulking the butt joints afterwards.

Report describing the advantages and best practices for installing heat pump water heaters (HPWH), highlighting their improved energy efficiency, reliability, and critical considerations such as condensate management, proper sizing, and optimal installation location to enhance performance and...

Report sumarizing results of an ICF investigation of side-by-side houses in Knoxville, Tennessee.

Information sheet presenting techniques for installing cellulose insulation.

Factsheet describing how to partially install a heat pump in a manufactured home in the manufactured home factory.

Journal article detailing laboratory and simulation studies quantifying the impact that heat pump and air conditioner installation faults have on system capacity and efficiency.

A guide for users and energy raters of insulated siding as home insulation.

Website providing builders with information about meeting RESNET Grade 1 criteria when installing insulation.

The purpose for this document is to provide basic guidance on the use of proven installation techniques that can be used by installers to help ensure correct “dense pack” application of JM Spider® in drill & fill applications.

Article providing guidance for installing manufactured stone veneer, including information on rainscreens.

Website providing information about Knauf Insulation.

Guide describing sound mitigation measures to lower building natural disaster vulnerability to assist local officials and community decision makers in coastal areas.

Report using a field test plan to evaluate the success of implementing energy efficiency upgrades at the community scale incorporating whole-house systems integrated measures package (SIMP).

This Measure Guideline provides design and construction information for a deep energy enclosure retrofit solution of a flat roof assembly.

Report summarizing a case study about the performance of three occupied homes built in 2009 in San Antonio, Texas.

A website issuing watches, warnings, forecasts, and analyses of hazardous tropical weather and increasing the understanding of hazards.

The Saffir-Simpson Hurricane Wind Scale is a 1 to 5 rating based on a hurricane's sustained wind speed.

Report investigating what motivates remodelers to become energy-focused and what technical knowledge that need to be energy-focused.

An article about double-hung windows.

This standard provides a benchmark for safe electrical design, installation, and inspection to protect people and property from electrical hazards and has been adopted in all 50 states.

The Enhanced F-scale is a set of wind estimates (not measurements) based on damage which uses three-second gusts estimated at the point of damage based on a judgment of 8 levels of damage to the 28 indicators listed.

Report presenting performance results from tests conducted on an energy efficiency retrofit project in Stockton, California.

Paper examining the monitored performance of four newly constructed near zero energy homes in Florida.

Fact sheet poster describing an online tool offered within the Building America Solution Center which provides construction guidance for builders and contractors in building and renovating homes to be more resistant to natural disasters such as hurricanes, flooding, earthquakes and wildfires, etc.

This page provides important information on how to protect yourself and your family if you suspect that you might have vermiculite insulation from Libby, Montana.

Information sheet including a checklist of steps to follow for pouring concrete.

Webpage describing the Quality Install Tool, an open-source web app designed to simplify, standardize, and expedite the creation of high-quality installation documentation for HVAC installations and efficiency upgrades.

A report presenting alternative approaches for reducing the costs of roof-mounted, grid-connected photovoltaic (PV) systems.

Fact sheet describing best practices in installing leak-free refrigerant systems, including specifics on creating flare joints and brazed joints, pressure testing, vacuum testing, and charging the system with refrigerant.

Presentation providing information about correctly installing ductwork in new and existing homes.

U.S. DOE report summarizing findings from literature and research relevant to HVAC installation practices.

Presentation describing RESNET grading criteria for insulation installation.

Recovery advisory guide providing guidance on existing code requirements as well as recommend best practices for attachment design, installation, and maintenance of rooftop solar panels to increase panel wind resistance in the U.S. Virgin Islands after Hurricane Maria.

Factsheet describing air-sealing.

Technical study exploring the impact of different installation faults on heat pump performance in a single-family house.

High-density sidewall cavity insulation can be a major comfort and savings boost. It saves energy by slowing both conductive and convective losses, but only if the right things are done and done right. This always requires site-specific thinking.

Study conducted to help determine cost-effective solutions for heating and cooling houses that are designed to be energy efficient.

Webpage describing the STEP campaign encouraging the use of smart diagnostic tools to reduce installation faults.

Guidelines to assist builders in designing and constructing homes equipped with a set of features that make the installation of solar energy systems after the completion of the home’s construction easier and less expensive.

A website providing timely and accurate forecasts and watches for severe thunderstorms and tornadoes over the contiguous United States.

This guide and workbook offers practitioners with the knowledge to properly implement the measurement and documentation procedures required in the ANSI/ACCA 5.

Brochure with information about how to select and install house wrap and other weather-resistive barriers.

Conference paper summarizing the relative performance of currently available Heat Pump Water Heaters (HPWH) models, the energy implications of different installation locations (garage, basement, or conditioned space) and ducting configurations (exhaust ducting, full ducting, or no ducting), as well...

Report proposing a procedure for estimating the whole opaque wall R-value (whole-wall R-value), independent of system type and construction materials.

Information sheet about types and installation of insulation.

Tool designed to find utility partners that can help with the installation of EV chargers.

Guide providing information about controlling rainwater through use of drainage planes.

Users guide to help contractors and homeowners use the Cold Climate Heat Pump Sizing Support Tools developed by NEEP to size and select the best air source heat pumps for their cold climate location.