Library

Article describing the causes of wood decay and moisture issues.

Guidance document on deep energy retrofits.

Research report describing the development of standardized test methods for PM2.5 and CO2 sensors enabling reliable, low-cost indoor air quality monitoring and improvement.

Information about dense pack, cellulose insulation.

The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.

A report describing six mechanical ventilation strategies that were evaluated for their ability to control indoor humidity levels over 14-day periods with simulated occupancy.

Report describing an investigation into multiple occupancy-based ventilation control strategies and the associated energy savings.

Webpage from U.S. Department of Energy describing using Earth-Sheltered home building techniques in hot climate zones.

Report on problems and solutions with EIFS stucco wall cladding systems.

This study evaluates the energy, humidity and indoor air quality implications of residential ventilation cooling in all US IECC climate zones.

Discussion of structural thermal resistance.

Website from the U.S. Department of Energy providing consumers with information on saving energy and using renewable energy technologies.

This publication provides a set of best practices for improving indoor air quality in conjunction with energy upgrade work in homes.

Technical report describing the enhancement of energy efficiency in existing buildings through a systems approach, assessing airflow-focused retrofits for improved energy savings and indoor air quality, considering factors like air leakage, distribution system dynamics, duct leakage, and ventilation...

Information sheet with details on a building enclosure designed for Albuquerque, NM, as an example for building enclosures built for hot-dry and mixed-dry climates.

Information sheet that summarizes Insulated Concrete Form (ICF) construction including advantages and disadvantages of this construction strategy.

This report evaluates the performance of variable-capacity comfort systems, with a focus on inverter-driven, variable-capacity systems, as well as proposed system enhancements.

Technical report describing the evaluation of four different ventilation strategies for providing make-up air in high-performance, new construction multifamily buildings in the Northeast, emphasizing the challenges posed by increasing airtightness standards and the variability of system performance...

Report on the performance of range hood exhaust fans.

Fact sheet describing indoor air quality (IAQ), including information on common sources of indoor air pollutants and best practices for improving IAQ.

Report outlining how Smart ventilation controls (SVC) balance energy consumption, comfort, and IAQ by optimizing mechanical ventilation operation to reduce the heating and/or cooling loads, improve management of indoor moisture, and maintain IAQ equivalence according to ASHRAE 62.2.

Report on the field evaluation of whole-building approaches and estimation of the relative contributions of select technologies toward reducing energy use related to space conditioning in new manufactured homes.

Technical report on a field validation study that utilizes low-cost indoor air quality sensors to assess a smart ventilation system's effectiveness in maintaining acceptable indoor humidity in low-load homes in humid environments, revealing that while the smart ventilation algorithm demonstrated...

ASHRAE Q&A addressing HVAC filtration and disinfection for reducing the spread of COVID-19.

Research report assessing the moisture and cooling load impacts of airtightness and mechanical ventilation in homes in hot-humid climates.

Page describing in detail four important actions you should consider to protect your health and indoor air quality (IAQ) when cleaning up after a flood.

Detailed information about Formaldehyde including health effects and strategies to reduce exposure.

Results from a research program testing airtightness, implications of air leakage and contaminant reduction over the garage-to-house interface.

Document describing the emissions criteria for carpets, cushions, and adhesives to qualify as those with low volatile organic compound (VOC) emissions under the Carpet and Rug Institute's Green Label Plus Indoor Air Quality Testing Program.

Report about opportunities for ventilation when traditional methods are limited by weather conditions or by contaminants in the outdoor air.

Document that gives a step-by-step approach for designing attachments for cladding materials through foam sheathing.

Webpage describing how to guard homes and properties against wildfire, as well as what to do during a wildfire, whether sheltering in place or attempting evacuation.

Report about indoor air quality related to indoor mold growth.

Webpage that describes health problems that can be caused by secondhand smoke.

Article describing the impact of stack effect on building performance, highlighting how pressure differences caused by temperature and height affect air infiltration and exfiltration, and detailing strategies like compartmentalization and distributed mechanical systems to manage airflow and maintain...

Article describing considerations for choosing a room-level air cleaner to improve indoor air quality.

Companion document to the Indoor airPLUS Construction Specifications, providing guidance on identifying compliant products, including industry databases and examples of product labeling.

Book providing project management guidance in maintaining satisfactory indoor air quality (IAQ) of occupied buildings undergoing renovation or construction.

Report documenting the results of a NYSERDA-funded research project to demonstrate the costs and benefits of a best practice systems approach to improving exhaust ventilation system performance in five multifamily buildings in New York State.

Article describing ways home owners can improve ventilation in their kitchens.

Webpage describing indoor air quality.

Standard supporting indoor air quality performance by producers, purchasers and policy makers to improve the environmental performance of products and services.

This research study used pollutant measurements, home inspections, diagnostic testing and occupant surveys to assess IAQ in 24 new or deeply retrofitted homes designed to be high performance green buildings in California.

Resource hub describing indoor air quality research performed by Lawrence Berkeley National Laboratory.

Website helping builders, designers, and home energy raters find products that are compliant with the EPA Indoor airPLUS Construction Specification requirements for low-emission materials.

Document outlining specifications that were developed by the U.S. Environmental Protection Agency (EPA) to recognize new homes equipped with a comprehensive set of indoor air quality (IAQ) features.

Website providing the technical specifications and related documents for home builders, subcontractors, architects, and other housing professionals interested in certifying a home to the EPA's Indoor airPLUS program requirements.

Fact sheet describing the newly developed Ventilation-Integrated Comfort System (VICS) that reduces space requirements and eliminates costly ductwork for separate heating, cooling, and ventilation systems, all while enhancing performance, addressing the demand for energy-efficient homes, and...