Library

Article describing a method for flashing roof vent boots, describing how to flash the pipe, how to flash over and under the pan, and finish by shaping the shingles, as well as addressing potential water leakage by adding an additional seal with EPDM flashing tape with a butyl adhesive backing to the...

Preliminary results of two monitored lab homes constructed to represent the thermal characteristics of typical existing Florida homes are presented.

Report describing the formation of icicles and ice dams along poorly ventilated roofs and how to mitigate ventilation issues with insulation and vents.

This report examines indoor air quality in post-2013 homes across various climates, focusing on contaminant levels, ventilation equipment usage, and control measure impact, with regional data from Florida, Georgia, and South Carolina.

Standard that provides procedures and methods for meeting minimum ventilation and indoor air quality requirements to engineers, design professionals, owners, and jurisdictional authorities where model codes have been adopted. This is the current version of the standard, which was published in the...

Report describing the use of attic ventilation to control moisture in cathedral roofs and avoid the formation of ice dams.

Guide providing information on controlling attic ductwork sweating.

Report covering the migration of wind-blown embers in roof vents.

Report describing a field study of 31 homes to test envelope and duct leakage and fan flowrates, and to determine ventilation operation characteristics.

Article describing how to weatherproof dormers using peel-and-stick membranes when flashing a dormer.

Report describing sloped roof assemblies with high levels of thermal performance.

Web page explaining what a cool roof is and how they work, as well as benefits to their use and links to research studies.

EPA coronavirus Q&A discussing the role of HVAC filters in dealing with COVID-19.

Article discussing the risks that can occur from undercutting bedroom doors to provide return airflow from bedrooms, as well as corrective measures that can be taken to address these risks.

Webpage describing how different amounts and types of snow loads affect the structural integrity of roofs and homes.

Article describing the impacts of wildfire smoke on indoor air quality and some ways ASHRAE is responding.

Article describing ways to design and construct a building to resist wildfires.

Study showcasing the location of the highest uplift force on the hip, ridge, and perimeter regions of roofs, and thus roofing material needs for the most fasteners and adhesive at these locations.

Study analyzing wind pressures on hip roofs where two hip roofs come together forming an L or T shaped roof or building.

Fact sheet describing impact-resistant window systems with specifics on Florida’s building codes.

A hurricane retrofit guide describing techniques for strengthening roof-to-wall connections for family homes.

Report describing Net Zero house design with sloped roof assemblies.