Library

Report providing guidance on indoor air quality in single-family and multifamily housing for designers, builders, property managers, homeowners, buyers, and renters.

Report providing architects, designers, and homeowners with information to make house plans useful for constructing a more wind resilient structure.

Fact sheet describing how to install bracing to retrofit roof dormers for increased wind resistance.

Factsheet providing homeowners with an overview of approaches for flashing and sealing roof penetrations to help discussion with a roofing contractor.

Fact sheet describing flashing of roof penetrations to make a home more resistant to high winds, hurricanes, and rainwater intrusion.

Report identifying the steps to take, with the help of a qualified home performance contractor, to seal unwanted air leaks while ensuring healthy levels of ventilation and avoiding sources of indoor air pollution.

Report covering non-combustible continuous exterior insulation and non-combustible roof venting.

Fact sheet describing proper roof sheathing installation and illustrating fastening methods that will enhance the durability of a building in high-wind areas; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Fact sheet describing recommended practices for the use of roofing underlayment as an enhanced secondary water barrier in coastal environments and optional installation methods; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Q&A article discussing how to address moisture issues in an attic in a wet and humid coastal climate.

Fact sheet describing the importance of proper roof and deck flashing, and typical and enhanced flashing techniques for coastal homes; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Webpage discussing the characteristics of sunlight and how cool roofs work to reduce solar heat gain.

Manual that identifies certain leakage limits for ducts and outlines procedures for testing ducts for conformity with air leakage limits that are set forth in a designer’s project specification.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

Fact sheet describing field validations of a smart ventilation system to assess its effectiveness in assisting low-load homes in humid environments by maintaining acceptable indoor humidity conditions while ensuring adequate ventilation and indoor air quality.

Fact sheet outlining the research behind how smart ventilation controls boost energy efficiency and indoor air quality, including research findings from seasonal temperature, timer, and real-time weather-based controls showing that all three systems showed potential for energy savings while...

Initiatives of smoke-free housing policies in New York State.

Toolkits for residents and owner/managers who live and work in federally assisted housing.

Report informing building stakeholders about the risks a snow event poses to their buildings, preventative measures to take before the snow season, and actions that should be taken before, during, and after a snow event.

Webpage providing information about design snow loads and a free interactive ground snow load mapping tool for the contiguous United States, as well as snow load calculation methods.

Specifications to assist builders in designing and constructing homes equipped with a set of features that make the installation of solar energy systems after the completion of the home’s construction easier and less expensive.

Spreadsheet tool that computes solar reflectance index (SRI) and roof surface temperature based on solar reflectance and thermal emittance using ASTM standard E 1980.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings; published in the year 2019, and is available for preview and purchase at the...

Standard that describes the minimum requirements for residential buildings to achieve acceptable indoor air quality via dwelling-unit ventilation, local mechanical exhaust, and source control. This version of the standard was published in the year 2022, and is available for preview and purchase at...

Standard 680 establishes definitions, classifications, test requirements, data requirements, ratings, operating requirements, marking and nameplate data and conformance conditions for residential air filter equipment.

Standard describing methods for installing radon mitigation systems in existing residential buildings three stories or less in height which was published in the year 2021 and is available for preview and purchase at the reference link.

Detailed requirements for testing, exposure modeling, and allowable limits for modeled indoor air concentrations.

Article describing ways to protect roofs from water infiltration by using self-adhering underlayment in vulnerable locations such as roof valleys, eave edges (to help deal with ice dams), rake edges, roofs to vertical walls (such as dormers), sidewall protection, the bottom of dormer valleys, and...

Document targeting retrofit program managers, retrofit contractors, policy makers, academic researchers, and non-governmental organizations that work to realize energy savings from home energy upgrades (HEUs).

Research project evaluating the pre-and post-retrofit energy consumption of a marine climate retrofit, compare actual energy use to original predictions, and identify opportunities for cost savings in other similar retrofits in this climate.

Fact sheet describing water management in a residential building.

Fact sheet describing the test procedure for wind and wind driven rain resistance of discontinuous roofing systems.

Presentation describing how to make a Corsi-Rosenthal Box for air cleaning.

Article describing a field study that test ventilation performance in nine homes and found current ventilation was inadequate to remove PM2.5 and CO2 levels; however, a directly exhausting range hood can reduce peak PM2.5 concentrations by 75% or more.

Manuals describing design, materials, and installation techniques applicable to almost all types of roof systems; four-volume set includes Metal Panel and SPF Roof Systems, Membrane Roof Systems, Architectural Metal Flashing and Condensation and Air Leakage Control, and Steep-Slope Roof Systems.

Standard 55 specifies conditions for acceptable thermal environments and is intended for use in design, operation, and commissioning of buildings and other occupied spaces; is the current version of the standard, which was published in the year 2021, and is available for preview and purchase at the...

Article from Purdue University on the potential for white paint technology to lower air conditioning usage requirements.

Factsheet providing design guidance for engineers describing how to characterize snow drifts on roofs in three dimensions rather than two, as anticipated in the 2022 edition of the standards, ASCE 7 - Minimum Design Loads and Associated Criteria for Buildings and Other Structures.

Fact sheet outlining best design and construction practices for tile roofing in high wind areas; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Blog article summarizing the effects of extreme heat on air quality and lung health.

Report presenting information that aids qualified architects and engineers in the identification of the best available refuge areas in existing buildings for sheltering in place during a tornado.

Article describing the impact of increasingly stringent ventilation standards on multifamily buildings, highlighting the inefficiencies and challenges of exhaust-only ventilation in tightly sealed enclosures, the complications of achieving balanced ventilation, and the unintended consequences of...

Webpage from Southern California Earthquake Center (SCEC) on identifying key problem spots on unreinforced masonry chimneys and how to retrofit them to withstand seismic forces.

Report reviewing unvented roof assemblies, such as conditioned attics and unvented cathedral ceilings that are becoming common in North American construction.

Document summarizing the various papers on unvented conditioned cathedralized attics found on BSC's website.

Report covering wind uplift and roofing membrane failures.

This study uses a computer simulation approach to examine the energy and indoor air quality implications of passive and hybrid ventilation systems.

Webpage describing the use of cool roofs to reduce heat islands and and benefits and costs.

Document presenting analysis results, focusing on relative humidity (RH) excursions, which are defined as unique events of indoor RH above a threshold.

Research report that validates Pinhole Insulation®, offering a cost-effective, minimally invasive solution for enhancing insulation and air sealing in enclosed roof cavities, improving R-value by 60% compared to traditional methods.