Library

This report evaluates the performance of variable-capacity comfort systems, with a focus on inverter-driven, variable-capacity systems, as well as proposed system enhancements.

Study investigating homeowner measure package choices in the Illinois Home Performance with ENERGY STAR program compared to cost-optimal choices determined through Building Energy Optimization (BEopt) modeling software.

Technical report describing the evaluation of four different ventilation strategies for providing make-up air in high-performance, new construction multifamily buildings in the Northeast, emphasizing the challenges posed by increasing airtightness standards and the variability of system performance...

Report on the performance of range hood exhaust fans.

Fact sheet describing indoor air quality (IAQ), including information on common sources of indoor air pollutants and best practices for improving IAQ.

Study characterizing how foundation heat exchangers (FHXs) used in residential ground source heat pump systems represent a potential cost savings due to their lesser first cost over other types of heat exchangers.

Report outlining how Smart ventilation controls (SVC) balance energy consumption, comfort, and IAQ by optimizing mechanical ventilation operation to reduce the heating and/or cooling loads, improve management of indoor moisture, and maintain IAQ equivalence according to ASHRAE 62.2.

Technical report on a field validation study that utilizes low-cost indoor air quality sensors to assess a smart ventilation system's effectiveness in maintaining acceptable indoor humidity in low-load homes in humid environments, revealing that while the smart ventilation algorithm demonstrated...

ASHRAE Q&A addressing HVAC filtration and disinfection for reducing the spread of COVID-19.

Page describing in detail four important actions you should consider to protect your health and indoor air quality (IAQ) when cleaning up after a flood.

Detailed information about Formaldehyde including health effects and strategies to reduce exposure.

Calculator determining the appropriate design pressures for steep-slope roof coverings for roofers and evlauators.

Report analyzing the effect of global climate change on national interests, and providing climate predictions.

Results from a research program testing airtightness, implications of air leakage and contaminant reduction over the garage-to-house interface.

Website with prepopulated information about the United States renewable resources.

Document describing the emissions criteria for carpets, cushions, and adhesives to qualify as those with low volatile organic compound (VOC) emissions under the Carpet and Rug Institute's Green Label Plus Indoor Air Quality Testing Program.

Research report presenting results of short term tests on measures used in an energy efficiency retrofit project in California.

Report about opportunities for ventilation when traditional methods are limited by weather conditions or by contaminants in the outdoor air.

Webpage describing how to guard homes and properties against wildfire, as well as what to do during a wildfire, whether sheltering in place or attempting evacuation.

Report about indoor air quality related to indoor mold growth.

Webpage that describes health problems that can be caused by secondhand smoke.

Article describing the impact of stack effect on building performance, highlighting how pressure differences caused by temperature and height affect air infiltration and exfiltration, and detailing strategies like compartmentalization and distributed mechanical systems to manage airflow and maintain...

Report sumarizing results of an ICF investigation of side-by-side houses in Knoxville, Tennessee.

Article describing considerations for choosing a room-level air cleaner to improve indoor air quality.

Companion document to the Indoor airPLUS Construction Specifications, providing guidance on identifying compliant products, including industry databases and examples of product labeling.

Book providing project management guidance in maintaining satisfactory indoor air quality (IAQ) of occupied buildings undergoing renovation or construction.

Report documenting the results of a NYSERDA-funded research project to demonstrate the costs and benefits of a best practice systems approach to improving exhaust ventilation system performance in five multifamily buildings in New York State.

Article describing ways home owners can improve ventilation in their kitchens.

Webpage describing indoor air quality.

Standard supporting indoor air quality performance by producers, purchasers and policy makers to improve the environmental performance of products and services.

This research study used pollutant measurements, home inspections, diagnostic testing and occupant surveys to assess IAQ in 24 new or deeply retrofitted homes designed to be high performance green buildings in California.

Resource hub describing indoor air quality research performed by Lawrence Berkeley National Laboratory.

Website helping builders, designers, and home energy raters find products that are compliant with the EPA Indoor airPLUS Construction Specification requirements for low-emission materials.

Document outlining specifications that were developed by the U.S. Environmental Protection Agency (EPA) to recognize new homes equipped with a comprehensive set of indoor air quality (IAQ) features.

Website providing the technical specifications and related documents for home builders, subcontractors, architects, and other housing professionals interested in certifying a home to the EPA's Indoor airPLUS program requirements.

Fact sheet describing the newly developed Ventilation-Integrated Comfort System (VICS) that reduces space requirements and eliminates costly ductwork for separate heating, cooling, and ventilation systems, all while enhancing performance, addressing the demand for energy-efficient homes, and...

Report that describes BSC's Houses That Work II (HTWII) climate-specific technical resource, beginning with an overall HTWII introduction and four sections explaining the four most important hygro-thermal climate regions: Hot-Humid, Mixed-Humid, Cold, and Hot-Dry/Mixed-Dry.

Research report discussing the reduction of HVAC energy consumption to meet U.S. greenhouse gas targets and DOE's energy-efficient building goals. It introduces iComfort, an IoT-based system for optimizing home comfort and energy savings.

Information sheet about efficiency and health benefits of MERV filters.

EPA’s 2008 Lead-Based Paint Renovation, Repair and Painting (RRP) Rule (as amended in 2010 and 2011), aims to protect the public from lead-based paint hazards associated with renovation, repair and painting activities.

Report on whole-house and spot ventilation strategies for improved indoor air quality.

Guide describing sound mitigation measures to lower building natural disaster vulnerability to assist local officials and community decision makers in coastal areas.

Report using a field test plan to evaluate the success of implementing energy efficiency upgrades at the community scale incorporating whole-house systems integrated measures package (SIMP).

Website providing links to the EPA developed map of radon risk in the United States.

Guidebook providing useful examples of high performance retrofit techniques for the building enclosure of wood frame residential construction in a cold and somewhat wet climate.

This document addresses adding—or improving—mechanical ventilation systems to existing homes. The purpose of ventilation is to remove contaminants from homes either directly or by dilution. This report discusses where, when, and how much ventilation is appropriate in a home, including some...

Report summarizing a case study about the performance of three occupied homes built in 2009 in San Antonio, Texas.

Website providing medical information about malignant mesothelioma, a cancer related to asbestos exposure.