Library

Expert meeting held to review and discuss results and future plans for research to improve the performance of hydronic heating systems using condensing boilers and baseboard convectors.

Report that demonstrates the durability, constructability, and cost-effectiveness of the extended plate and beam (EP&B) wall system for new construction housing projects in compliance with the International Energy Conservation Code, addressing moisture risk management and high-performance envelope...

Report on high-R wall design called extended plate and beam that uses foam sheathing insulation with wall framing.

Fact sheet describing the Extended Plate Wall (EPW) a system that incorporates a 2-inch layer of foam plastic insulative sheathing within the framing for top and bottom plates, streamlining air sealing, window and door installation, weather resistive barrier application, and cladding attachment for...

The New York State Energy Research and Development Authority (NYSERDA) is interested in finding cost-effective solutions for deep energy retrofits (DERs) related to exterior wall insulation in a cold climate, with targets of 50% peak load reduction and 50% space conditioning energy savings.

Research study developing baseline engineering analysis to support the installation of thick layers of exterior insulation (2 in. to 8 in.) on existing masonry walls and wood framed walls.

Webpage from LSU AgCenter answering frequently asked questions after gutting a flooded home, including mitigation strategies for future floods.

Information sheet about what length screws should be used, and how closely to space the screws when fastening furring strips to a foam-sheathed wall.

An example of a commercially available thermally expansive fire stopping product for controlling the spread of fires in a rainscreen cavity.

Study characterizing how foundation heat exchangers (FHXs) used in residential ground source heat pump systems represent a potential cost savings due to their lesser first cost over other types of heat exchangers.

Article explaining what a continuous load path is and the key connection points that make it up.

Research study evaluating the dynamic heat transmission characteristics through two identical Insulating Concrete Form (ICF) wall assemblies in Ottawa, Canada.

Information sheet with an analysis of mini split heat pump systems.

Report on field monitoring of inverter-driven ASHPs in cold-climate homes.

Technical report on a field validation study that utilizes low-cost indoor air quality sensors to assess a smart ventilation system's effectiveness in maintaining acceptable indoor humidity in low-load homes in humid environments, revealing that while the smart ventilation algorithm demonstrated...

A guide for designers, architects, engineers, and fire experts on how to design rainscreen and ventilated cavities such that they don’t contribute to the spread of a fire.

This five-page brochure contains basic information on flood cleanup with illustrations and links to more detailed information.

Article discussing flow-through assemblies of walls.

Journal article describing lessons learned from updating a 16-year-old deep-energy retrofit.

Information sheet with manufacturer specifications about insulated concrete forms.

Report about development of effective strategies to reduce the overall building energy use in line with Building America goals in this modestly priced market rate project.

Report investigating the status of the geothermal heat pump (GHP) industry and technology in the United States, assembling GHP energy savings potential, identifying key barriers to application of GHPs, and identifying actions that could accelerate adoption of GHPs.

Website with information about ENERGY STAR criteria for geothermal heat pumps.

Website highlighting the DOE Building Technologies Office Grid-interactive Efficient Buildings Initiative, including technical reports, other publications, resources, and presentations.

Website article discussing the economics of ground source heat pumps.

Report presenting a cold climate project examining and alternative approach to ground source heat pump ground loop design.

Factsheet describing the uses and benefits of ground-source heat pumps for affordable housing, assisted living, dorms and hotels.

Factsheet describing how to install air source heat pumps for residential heating and cooling in cold climates.

Guide providing information on using exterior foam insulating sheathing in building wall assemblies to enhance thermal performance.

Factsheet describing how to install air source heat pumps for residential heating and cooling in cold climates.

Guide by the Northeast Energy Efficiency Partnerships on how to size heat pumps in a cold climate.

A article about the best practice method of installing fiber cement siding, to install flashing at the butt joints of the siding boards, rather than face caulking the butt joints afterwards.

Document providing supplemental information for code enforcement professionals about header hangers in bearing walls.

A ENERGY STAR guide on efficient heating, ventilation and cooling systems in residential homes.

LBNL webpage introducing heat island effect and cool materials concepts, and providing links to LBNL pages explaining cool pavements, cool roofs, and cool walls.

Report describing the various heat pump retrofit options for multifamily buildings in the U.S., segmented by building typology and heating system, to support better environmental, economic, and health outcomes.

Presentation about heat pump water heater modeling using EnergyPlus.

Article discussing the advantages of using heat pumps and/or hydronic forced air heat instead of furnaces in high-performance homes.

Report providing information for HVAC designers, installers, and consumers about air source heat pumps.

Case study of new home construction in the hot-dry and mixed-dry climate zones.

Brochure describing advanced framing techniques.

Article from NREL on wall construction guidelines for homes in hot climate zones.

Report that considers a number of promising wall systems that can meet the requirement for better thermal control.

Report providing testing methodology to evaluate structural rim header designs over openings up to 6 ft. wide and applicable to one- and two-story homes.

Report with test results that serve as a baseline of data for further material tests of other high-R wall systems and for comparison to whole-house wind pressure testing.

Research study presenting results of an existing home monitoring project designed to measure wall cavity moisture characteristics.

Report covering control of hydrostatic pressure in wall assemblies.

Report providing a collection of fact sheets describing guidance for constructing homes in wildfire zones.

Website for consumers describing heat pump water heater technology and linking to retailers and installers.

A starting point for ballparking and comparing the cost of different siding materials and a brief overview of the pros and cons of different siding materials.