Library

Checklist providing good and bad methods of fortifying the roof, especially in hurricanes.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for high wind resistance.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for high wind and hail resistance.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for hurricane resistance.

Checklist highlighting key concepts of wind design uplift pressures and design uplift pressure ratings for proper selection and installation of residential roof covering systems to comply with section R905.1 of the 2015 International Residential Code for a FORTIFIED Roof™–New Roof designation.

Fact sheet instructing installers about flashing installed on a FORTIFIED roof and points to roof covering manufacturers for flashing installation instructions.

Checklist providing the type of roofing felt recommended by IBHS as a quilified sealed roof deck system for asphalt shingle or metal roofing.

Checklist providing options and a guide for taping roof deck seams.

Checklist providing information on strengthening the attachment of roof sheathing and installation of a sealed roof deck system using a spray polyurethane foam adhesive.

Checklist providing selection and installation guidance for residential, non-structural metal roof systems installed over wood roof decks with a roof slope 2:12 or greater to comply with section R905.1 of the 2015 IRC for a FORTIFIED Roof – New Roof Designation.

Checklist providing additional guidance and options for asphalt shingle installations at roof edges, intersections and valleys.

Website providing technical documents of checklists, calculators, bulletin, modular home toolkit, standard details, and corrosion resistance requirements – map set; describing the requirements of the IBHS Fortified Home program to improve the disaster resistance of new and existing homes.

Website offering an online training that teaches disaster-resistant best practices for roofers.

The FPC Monitoring project has evaluated radiant barrier systems (RBS) as a new potential DSM program.

Guide describing retrofit procedures for gable end roofs.

Guide describing how and where to install flashings in order to weatherproof a roof.

Brochure on specifications for PV systems.

Report investigating the status of the geothermal heat pump (GHP) industry and technology in the United States, assembling GHP energy savings potential, identifying key barriers to application of GHPs, and identifying actions that could accelerate adoption of GHPs.

Website with information about ENERGY STAR criteria for geothermal heat pumps.

Website highlighting the DOE Building Technologies Office Grid-interactive Efficient Buildings Initiative, including technical reports, other publications, resources, and presentations.

Website article discussing the economics of ground source heat pumps.

Report presenting a cold climate project examining and alternative approach to ground source heat pump ground loop design.

Factsheet describing the uses and benefits of ground-source heat pumps for affordable housing, assisted living, dorms and hotels.

Factsheet describing how to install air source heat pumps for residential heating and cooling in cold climates.

Factsheet describing how to install air source heat pumps for residential heating and cooling in cold climates.

Guide by the Northeast Energy Efficiency Partnerships on how to size heat pumps in a cold climate.

Report describing the use of fresh air ventilation systems to eliminate the formation of icicles and ice dams along the eaves of roofs.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance to high wind and hail.

A ENERGY STAR guide on efficient heating, ventilation and cooling systems in residential homes.

LBNL webpage introducing heat island effect and cool materials concepts, and providing links to LBNL pages explaining cool pavements, cool roofs, and cool walls.

LBNL webpage providing resources and tools related to cool technologies, including the SRI calculator and the DOE Cool Roof Calculator.

Report describing the various heat pump retrofit options for multifamily buildings in the U.S., segmented by building typology and heating system, to support better environmental, economic, and health outcomes.

Presentation about heat pump water heater modeling using EnergyPlus.

Article discussing the advantages of using heat pumps and/or hydronic forced air heat instead of furnaces in high-performance homes.

Report providing information for HVAC designers, installers, and consumers about air source heat pumps.

Best Practices document providing an introduction to current photovoltaic and solar thermal building practices.

Report containing 37 fact sheets that provide technical guidance and recommendations concerning the construction of coastal residential buildings.

Report providing a collection of fact sheets describing guidance for constructing homes in wildfire zones.

Article describing the causes that form ice dams, as well as solutions for preventing future ice dams on roofs, focusing on air sealing to prevent hot air leakage.

Website for consumers describing heat pump water heater technology and linking to retailers and installers.

Article from RMI on how climate change is leading to an increase in critical extreme heat hours and what smart building strategies can be taken to mitigate some of these effects including paint color and insulation.

Information sheet presenting the correct methods for building an insulated cathedral ceiling.

Article describing considerations for choosing a room-level air cleaner to improve indoor air quality.

Article from Washington Post on passive cooling measures for homes during extreme heat.

Article describing how to use radiator inlet orifices optimize two-pipe steam heating systems.

Factsheet describing how to partially install a heat pump in a manufactured home in the manufactured home factory.

Article from Montana State University Extension explaining how proper insulation techniques can greatly reduce the risks of ice dams on roofs in cold climate zones.

Checklist for verifying FORTIFIED levels and documentation needed.

A structural insulated panel (SIP) roof has no embedded lumber in the structure, and therefore nothing substantial for attaching PV array and solar hot water mounts. Single or double lumber splines could be put into the panels, or I-joists at 4-foot intervals could be added.

Report providing the results of an analysis of humidity control and variable refrigerant flow (VRF) system efficiency in three new multifamily buildings in New York, NY.