Library

Checklist providing good and bad methods of fortifying the roof, especially in hurricanes.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for high wind resistance.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for high wind and hail resistance.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for hurricane resistance.

Checklist highlighting key concepts of wind design uplift pressures and design uplift pressure ratings for proper selection and installation of residential roof covering systems to comply with section R905.1 of the 2015 International Residential Code for a FORTIFIED Roof™–New Roof designation.

Fact sheet instructing installers about flashing installed on a FORTIFIED roof and points to roof covering manufacturers for flashing installation instructions.

Checklist providing the type of roofing felt recommended by IBHS as a quilified sealed roof deck system for asphalt shingle or metal roofing.

Checklist providing options and a guide for taping roof deck seams.

Checklist providing information on strengthening the attachment of roof sheathing and installation of a sealed roof deck system using a spray polyurethane foam adhesive.

Checklist providing selection and installation guidance for residential, non-structural metal roof systems installed over wood roof decks with a roof slope 2:12 or greater to comply with section R905.1 of the 2015 IRC for a FORTIFIED Roof – New Roof Designation.

Checklist providing additional guidance and options for asphalt shingle installations at roof edges, intersections and valleys.

Website providing technical documents of checklists, calculators, bulletin, modular home toolkit, standard details, and corrosion resistance requirements – map set; describing the requirements of the IBHS Fortified Home program to improve the disaster resistance of new and existing homes.

A builder's guide describing hurricane-resistant reinforcements for gable ends.

Guide describing how and where to install flashings in order to weatherproof a roof.

Report investigating the status of the geothermal heat pump (GHP) industry and technology in the United States, assembling GHP energy savings potential, identifying key barriers to application of GHPs, and identifying actions that could accelerate adoption of GHPs.

Website with information about ENERGY STAR criteria for geothermal heat pumps.

Article describing the fundamentals and basics of glazing hazard mitigation practices for both new and existing buildings.

Website highlighting the DOE Building Technologies Office Grid-interactive Efficient Buildings Initiative, including technical reports, other publications, resources, and presentations.

Website article discussing the economics of ground source heat pumps.

Report presenting a cold climate project examining and alternative approach to ground source heat pump ground loop design.

Factsheet describing the uses and benefits of ground-source heat pumps for affordable housing, assisted living, dorms and hotels.

IRC guide referencing wood truss bracing best practices and requirements.

Factsheet describing how to install air source heat pumps for residential heating and cooling in cold climates.

Factsheet describing how to install air source heat pumps for residential heating and cooling in cold climates.

Guide by the Northeast Energy Efficiency Partnerships on how to size heat pumps in a cold climate.

Report describing tsunamis and options for vertical evacuation from tsunamis; the guide addresses determination of tsunami and earthquake loads and structural design criteria and concepts, primarily for commercial buildings.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance to high wind and hail.

A ENERGY STAR guide on efficient heating, ventilation and cooling systems in residential homes.

Report describing the various heat pump retrofit options for multifamily buildings in the U.S., segmented by building typology and heating system, to support better environmental, economic, and health outcomes.

Presentation about heat pump water heater modeling using EnergyPlus.

Article discussing the advantages of using heat pumps and/or hydronic forced air heat instead of furnaces in high-performance homes.

Report providing information for HVAC designers, installers, and consumers about air source heat pumps.

Report presenting seismic design and construction guidance for one- and two-family houses for homebuilders, knowledgeable homeowners, and other non-engineers.

Website for consumers describing heat pump water heater technology and linking to retailers and installers.

A starting point for ballparking and comparing the cost of different siding materials and a brief overview of the pros and cons of different siding materials.

Article describing considerations for choosing a room-level air cleaner to improve indoor air quality.

Article describing how omission of two small but critical wall details, a kick-out flashing and a weep screed, lead to extensive water damage to a wall.

Article describing how to use radiator inlet orifices optimize two-pipe steam heating systems.

Factsheet describing how to partially install a heat pump in a manufactured home in the manufactured home factory.

Factsheet describing proper methods for installing vinyl siding and soffit coverings in high wind and coastal areas.

Factsheet describing tips for building or renovating with a focus on disaster resistance.

Report providing the results of an analysis of humidity control and variable refrigerant flow (VRF) system efficiency in three new multifamily buildings in New York, NY.

Report by the FEMA Mitigation Assessment Team on damages due to Hurricane Irma which struck Florida in September 2017, and recommendations for construction for future disaster resistance and preparedness.

Article presenting the 2008 update on the 2006 details on when required hurricane mitigation retrofits are required and the cost cap on required hurricane mitigation retrofits.

Code describing the requirements for existing site-built single-family homes to receive roof-to-wall retrofits when re-roofing.

Webpage containing a library of ready-to-use social media posts, graphics and video links that promote life-saving information about how individuals and families can prepare for and survive during a hurricane.

A document aimed at reducing the vulnerability of a gable end roof to wind damage in a hurricane.

Report describing the hurricane retrofit guide with focus on walls and wooded framed walls.

NOAA webpage providing images and short descriptions of different types of hurricane shutters.

Website detailing how to prepare for, stay safe during, and return home after hurricanes.