Library

Report about an expert meeting focused on issues surrounding cladding attachment and performance of walls with exterior insulating sheathing.

Expert Meeting about interior insulation retrofit of mass masonry wall assemblies held on July 30, 2011.

Expert meeting held to discuss simplified space conditioning systems in low load homes, including the relationship between advanced thermal enclosures, space conditioning systems and comfort.

Report that demonstrates the durability, constructability, and cost-effectiveness of the extended plate and beam (EP&B) wall system for new construction housing projects in compliance with the International Energy Conservation Code, addressing moisture risk management and high-performance envelope...

Report on high-R wall design called extended plate and beam that uses foam sheathing insulation with wall framing.

Fact sheet describing the Extended Plate Wall (EPW) a system that incorporates a 2-inch layer of foam plastic insulative sheathing within the framing for top and bottom plates, streamlining air sealing, window and door installation, weather resistive barrier application, and cladding attachment for...

The New York State Energy Research and Development Authority (NYSERDA) is interested in finding cost-effective solutions for deep energy retrofits (DERs) related to exterior wall insulation in a cold climate, with targets of 50% peak load reduction and 50% space conditioning energy savings.

Research study developing baseline engineering analysis to support the installation of thick layers of exterior insulation (2 in. to 8 in.) on existing masonry walls and wood framed walls.

Article from Building Science Corporation on construction techniques for extreme heat conditions in Dubai and Las Vegas.

Webpage from LSU AgCenter answering frequently asked questions after gutting a flooded home, including mitigation strategies for future floods.

Information sheet about what length screws should be used, and how closely to space the screws when fastening furring strips to a foam-sheathed wall.

An example of a commercially available thermally expansive fire stopping product for controlling the spread of fires in a rainscreen cavity.

Article explaining what a continuous load path is and the key connection points that make it up.

Information sheet providing detail about hand fabrication of a one-piece straight duct from a 48" x 120" x 1" thick (1.22 m x 3.05 m x 25 mm) sheet where the total inside duct dimensions equals 112" (2.84 m) or less.

Report outlining how Smart ventilation controls (SVC) balance energy consumption, comfort, and IAQ by optimizing mechanical ventilation operation to reduce the heating and/or cooling loads, improve management of indoor moisture, and maintain IAQ equivalence according to ASHRAE 62.2.

Research study evaluating the dynamic heat transmission characteristics through two identical Insulating Concrete Form (ICF) wall assemblies in Ottawa, Canada.

Report of a field evaluation of four novel roof designs to see how each design would reduce space-conditioned energy use so that the knowledge gained could be applied to the design of new manufactured homes.

Information sheet with an analysis of mini split heat pump systems.

Report about field testing that characterizes the uniformity of room-to-room ventilation air distribution under various operating conditions by examining multi-zone tracer gas decay curves and calculating local age-of-air.

Technical report on a field validation study that utilizes low-cost indoor air quality sensors to assess a smart ventilation system's effectiveness in maintaining acceptable indoor humidity in low-load homes in humid environments, revealing that while the smart ventilation algorithm demonstrated...

ASHRAE Q&A addressing HVAC filtration and disinfection for reducing the spread of COVID-19.

A guide for designers, architects, engineers, and fire experts on how to design rainscreen and ventilated cavities such that they don’t contribute to the spread of a fire.

Article describing five fundamental changes to building construction from the last 50 years and their modern construction consequences.

Standard providing a comprehensive approach to evaluating, selecting, specifying and installing flexible duct in HVAC systems.

Research study outlining savings from reducing air infiltration, with and without the addition of mechanical ventilation, using two identical laboratory homes designed to model existing Florida building stock.

This five-page brochure contains basic information on flood cleanup with illustrations and links to more detailed information.

Article discussing flow-through assemblies of walls.

Journal article describing lessons learned from updating a 16-year-old deep-energy retrofit.

Information sheet with manufacturer specifications about insulated concrete forms.

Report about development of effective strategies to reduce the overall building energy use in line with Building America goals in this modestly priced market rate project.

Report describing a project aimed at developing validated models and design tools for foundation heat exchangers.

Website highlighting the DOE Building Technologies Office Grid-interactive Efficient Buildings Initiative, including technical reports, other publications, resources, and presentations.

Report evaluating HVAC building technologies based on their ability to provide grid services and the type of value provided, including efficiency, load shed, load shift, and modulation.

Report evaluating lighting and electronic building technologies based on their ability to provide grid services and the type of value provided, including efficiency, load shed, load shift, and modulation.

Report providing an introduction to core concepts of GEBs, and explaining how flexible building loads can be integrated and controlled to benefit consumers, the grid, and society more broadly.

Report addressing the current state of these technologies and the challenges of adapting these to the GEB context.

Report focuseing on dynamic window and opaque envelope technologies for GEBs, including electrochromic glazing, automated attachments, and thermal storage.

Report presenting a cold climate project examining and alternative approach to ground source heat pump ground loop design.

Factsheet describing how to install air source heat pumps for residential heating and cooling in cold climates.

Guide providing information on using exterior foam insulating sheathing in building wall assemblies to enhance thermal performance.

Factsheet describing how to install air source heat pumps for residential heating and cooling in cold climates.

Presentation about proper installation of flexible ducts.

A article about the best practice method of installing fiber cement siding, to install flashing at the butt joints of the siding boards, rather than face caulking the butt joints afterwards.

Report detailing the monitored and modeled performance of a solar home outside of Washington DC.

Document providing supplemental information for code enforcement professionals about header hangers in bearing walls.

A ENERGY STAR guide on efficient heating, ventilation and cooling systems in residential homes.

LBNL webpage introducing heat island effect and cool materials concepts, and providing links to LBNL pages explaining cool pavements, cool roofs, and cool walls.

Report describing the various heat pump retrofit options for multifamily buildings in the U.S., segmented by building typology and heating system, to support better environmental, economic, and health outcomes.

Article discussing the advantages of using heat pumps and/or hydronic forced air heat instead of furnaces in high-performance homes.

Webpage providing basic information on various types of heat pumps and their applications in Massachusetts.