Library

Report presenting construction methods, building products, appliances and equipment of four single-family houses that achieve dramatic energy reductions and approach “net zero energy” use.

A structural insulated panel (SIP) roof has no embedded lumber in the structure, and therefore nothing substantial for attaching PV array and solar hot water mounts. Single or double lumber splines could be put into the panels, or I-joists at 4-foot intervals could be added.

Report providing the results of an analysis of humidity control and variable refrigerant flow (VRF) system efficiency in three new multifamily buildings in New York, NY.

Website providing comparison charts and reviews of hybrid inverters for solar power systems.

Report that describes BSC's Houses That Work II (HTWII) climate-specific technical resource, beginning with an overall HTWII introduction and four sections explaining the four most important hygro-thermal climate regions: Hot-Humid, Mixed-Humid, Cold, and Hot-Dry/Mixed-Dry.

Webpage describing benefits of adding battery storage to homes and an estimation tool.

Webpage from Boston Solar describing how solar plus storage options can be beneficial for maintaining electricity during power outages.

Study investigating measured cooling energy savings in homes across the U.S. from the installation of roofing with higher solar reflectance.

Study investigating measured cooling energy savings from the installation of wall finishes with higher solar reflectance.

This paper discusses model validation using data from three thermosiphon systems.

This report requires all elements of rooftop PV panel systems to be designed for component and cladding pressures per ASCE 7-10.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Standard covering overs mounting systems, including mounting devices, clamping devices and ground lugs for use with photovoltaic modules and panels and contains requirements for ground-mounted and roof systems as part of a nonstructural building component.

This Photovoltaic (PV) Installer Resource Guide is an informational resource covering basic requirements for PV installations intended for individuals pursuing the Photovoltaic Installer Certification credential offered by the North American Board of Certified Energy Practitioners (NABCEP).

A document providing guidance on integrating a PV array with a roof system.

Website providing comparison charts and reviews of off-grid inverters for solar power systems.

Large scale simulation study investigating the effects of cool roofs and walls on buildings of various vintages across the U.S., with special attention given to California.

Report aiming to "de-mystify" technology and economic considerations of residential PV systems.

Website estimating energy production and cost of energy of grid-connected photovoltaic (PV) energy systems throughout the world.

Searchable database of over 3,000 roofing products that have undergone solar reflectance and thermal emittance testing.

Searchable database of wall cladding and coating products that have undergone solar reflectance and thermal emittance testing.

A report presenting alternative approaches for reducing the costs of roof-mounted, grid-connected photovoltaic (PV) systems.

Data tables on U.S. renewable energy consumption and general trends in the market for renewable energy.

The RERH specifications and checklists take a builder and a project design team through the steps of assessing a home’s solar resource potential and defining the minimum structural and system components needed to support a solar energy system.

Website tool intended to guide home builders in assessing whether a new home has the proper physical orientation to support a future installation of a solar energy system.

Research study identifying the best performing, most energy-efficient and cost- effective techniques to provide controlled mechanical ventilation and humidity control in hot- humid climates with thermally efficient building envelopes.

Brochure with information on residential solar hot water systems.

Brochure detailing the guidelines, recommendations, and preferences of the City of Burnsville for citizens installing solar photovoltaics.

DOE report characterizing the installed base of windows and window coverings, and how users operate window coverings in order to enable precise quantification of energy savings.

Information sheet describing solar PV upgrade for an existing homes.

Document discussing changes in testing the annual performance ratings for solar water heaters.

Recovery advisory guide providing guidance on existing code requirements as well as recommend best practices for attachment design, installation, and maintenance of rooftop solar panels to increase panel wind resistance in the U.S. Virgin Islands after Hurricane Maria.

Webpage discussing the characteristics of sunlight and how cool roofs work to reduce solar heat gain.

Web page describing the basics of how to size and build a battery bank for electricity storage.

Paper describing the development and testing of an affordable net-zero energy house in Lenoir City, Tennessee.

Website article describing the way solar panels are coupled to AC and DC battery energy storage systems.

Report providing a synopsis of a project to evaluate the performance of a roof-integrated solar water heating system.

SEIA resources page.

Tool determining the most economical and efficient photovoltaic array location and position.

Guidelines to assist builders in designing and constructing homes equipped with a set of features that make the installation of solar energy systems after the completion of the home’s construction easier and less expensive.

The Solar Rating & Certification Corporation is the leading solar heating and cooling product certification program in North America, certifying to the requirements of International and Uniform Codes and Standards

Report identifying the important aspects of building design and construction to enable installation of solar photovoltaic and heating systems at some time after the building is constructed.

A research paper exploring the design, installation, repair and maintenance of solar water and pool heating technologies.

Website describing how solar water heaters -- also called solar domestic hot water systems -- can be a cost-effective way to generate hot water for your home.

The RERH specifications and checklists take a builder and a project design team through the steps of assessing a home’s solar resource potential and defining the minimum structural and system components needed to support a solar energy system.

Outlines the minimum criteria for a solar water heating system installed by a Solar Water Heating Program trade ally under Energy Trust of Oregon’s Solar Water Heating Program.

Webpage describing the basics of solar plus storage operations on homes.

California Energy Commission report presenting the concept of cool walls and providing guidelines for their building- and climate-appropriate use to conserve energy and reduce emissions.

Handheld solar site analysis tool capturing whole-horizon images for a site and generating shading analysis reports.