Library

2009 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

2009 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

Fact sheet providing an overview of the FEMA document Wind Retrofit Guide for Residential Buildings.

2012 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

2012 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

2015 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

Code set from IAPMO explaining plumbing standards. 2015 publication.

2018 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

Code set from IAPMO explaining plumbing standards. 2018 publication.

A presentation on the 2020 State Mechanical Code for easier understanding.

Performance rating standards for unitary air-conditioners and unitary air-source heat pumps, including definitions, classifications, testing, rating, and operating requirements, as well as minimum data requirements for published ratings and markings.

Guidebook covering basic principles and data used in the HVAC&R industry. This is the 2023 edition of the handbook, which can be purchased physically or digitally at the reference link in versions using either I-P units of measurement or SI units of measurement.

Web page describing essential guidelines and recommendations for optimal installation of ductless heat pumps in cold climates, ensuring maximum heating performance and long-term satisfaction for homeowners, supported by research-backed insights and detailed resources.

Website containing commercial information related to air conditioning and heating.

Website homepage for the Air Conditioning Contractors of America (ACCA).

Standard providing a universally accepted definition for quality installation for residential and commercial heating, ventilating, and air conditioning applications.

Document detailing the requirements, roles, and obligations for participants in an organized effort, ensuring that HVAC installations comply with the ANSI/ACCA 5 QI – 2010 (HVAC Quality Installation Specification) QI Standard.

Acceptance criteria providing guidelines for demonstrating compliance with codes referenced in the criteria related to barriers to water migration in thin-set installations of ceramic tile and stone flooring and shower sub-pan linings.

Specifications for water heating systems designed to advance higher performing electric and gas heat pump water heaters.

Case study about high humidity, mold and condensation on surfaces in S. Florida, and how building characteristics cause and amplify these problems.

This is a federal tax credit for complying air source heat pumpe. Units located in the "North" must meet ENERGY STAR's cold climate heat pump criteria.

Document providing step-by-step guidance to sizing air-source heat pumps for a cold climate.

Webpage describing the functionality and benefits of switching to Air Source Heat Pumps, as well as linking to sets of products, rebates, most efficient ASHPs, and providing consumer aid for purchasing an ASHP.

Research report describing study of interior and exterior air sealing techniques to stop ice dams in five 1.5-story retrofit homes conducted by the NorthernSTAR Building America Partnership team run by University of Minnesota.

Manual describing best practices or home construction in Alaska and northern climates.

Alliance for Water Efficiency website homepage.

Technical report describing how the FSEC Energy Research Center explores low-cost space-conditioning upgrades for existing homes by integrating centrally located, high-efficiency ductless mini split heat pumps with older but functional central space conditioning systems, aiming to achieve energy...

Report analyzing design heating load sizing methods for superinsulated homes in cold climates and comparing them to the actual energy usage to determine if the building load calculation methodology should be changed for calculating the design heating load of these homes.

Article describing different kinds of water-resistant backer boards.

Fact sheet describing basement insulation considerations.

Information sheet describing techniques for insulating basements.

Article explaining the importance of regular inspections of boiler systems in maintaining their safety, lifespan, and efficiency.

Research study discussing how housewraps restrict or permit the passage of water molecules based on size, but cannot control the direction in which the water vapor molecules move.

Brochure providing information about flashing in all cimates.

Information sheet providing information about vapor management in building assemblies.

Information sheet providing details on the vapor permeance of different types of materials used in building assemblies.

Report providing water management details for roof assemblies.

The Builder's Guide provides the building industry with the latest and best practical information on how to apply building science principles to structures as systems in hot-humid climate regions.

Research study about key sustainability concepts, durability, energy efficiency and new flood resistant design.

This report will review, and summarize the current state of understanding and research into enclosures with higher thermal resistance, so-called “High-R Enclosures.” Recommendations are provided for further research.

Document outlining building science principles about air flow, heat flow and moisture flow in homes.

Report about the fundamental concepts that must be understood at the planning or initial nspection of existing homes regarding surface and ground water management.

The EPA Burn Wise program promotes the importance of burning the right wood in the right way from the right sources with mission to protect human health and the environment.

Article describing correct ways to eliminate water damage by incorporating a sacrificial layer to foundation walls and footings.

Article describing the principle of capillarity in construction materials.

Part 2 of an article discussing how to maximize two-pipe steam systems for resident space heating.

A list of EPA-certified wood-burning appliances for home heating for a range of budgets.

Volume 1 of a two-volume report providing a comprehensive approach to planning, siting, and risk management for homes constructed in coastal environments.

Volume II of a two-volume report providing a comprehensive approach to design, construction, and renovation of homes located in coastal environments.

Report describing combined space- and water-heating (combi) systems using a high-efficiency direct-vent burner.