Library

Guide providing information for homeowners and renters on how to clean up residential mold problems and how to prevent mold growth.

Report telling consumers the risks of radon, how radon gets into a home, and steps consumers can take to reduce radon exposure in their homes.

Paper discussing innovative strategies for improving ventilation systems in high-rise apartment buildings, focusing on compartmentalization and controlling stack effect pressures to enhance indoor air quality and energy efficiency published in the Proceedings of the Eighth Conference on Building...

Article describing methods for thermally isolating a garage in a Passive House-certified multifamily building.

Website containing commercial information related to air conditioning and heating.

Technical report describing the research behind a new aerosol-based sealing method, utilizing pressurization and a dispersed sealant fog, facilitated by a standard blower door, to automatically measure, locate, and seal air leaks in new homes in the United States, providing an efficient solution to...

Website reporting efficiencies for dehumidifiers, room air conditioners, and room air cleaners that are tested by independent laboratories and reported by the Association of Home Appliance Manufacturers.

Information on the control of air flow across building enclosures to control moisture damage, reduce energy losses, and ensure occupant comfort and health. A continuous, strong, stiff, durable and air impermeable air barrier system is required between the exterior and conditioned space to control...

Document reporting results from a study done to evaluate effects of automotive emissions from attached garages on the indoor environment.

Case study about high humidity, mold and condensation on surfaces in S. Florida, and how building characteristics cause and amplify these problems.

Case study examining the problem of unwanted air transfer from garage to living space and the effectiveness of garage exhaust ventilation or house supply ventilation to provide a solution to that.

Website describing indoor air quality, and common indoor pollutants and how to reduce exposure to them.

Article describing technologies available for monitoring indoor air quality (IAQ).

Website describing archived program inforamtion for the Air Sensors International Conference, hosted by the University of California, Davis.

Standard detailing the specific requirements for all face, back, and inner ply grades as well as formaldehyde emissions, moisture content, tolerances, sanding, and grade marking which was published in 2020, can be acquired through a subscription with the ANSI webstore.

Updated detailed information about Formaldehyde.

Document describing recent discussions on indoor carbon dioxide (CO 2) levels.

ASTM standard providing test methods for determining duct air leakage in low-rise residential and commercial buildings.

Report describing information for builders and retrofitters about eliminating hazards and coincidental energy losses that come from attached garages.

Article describing the common ventilation system types, issues, and solutions in New York City's multifamily residential buildings to improve indoor air quality, occupant health, and building durability.

Information sheet about sealing combustion appliances to ensure good indoor air quality.

Information sheet about soil gas control strategies for foundations.

Article Describing methods for thermally isolating multifamily parking garages.

Expert meeting focusing on identifying gaps and barriers in combustion safety that need to be addressed by future research, and to develop data-driven technical recommendations for code updates so that a common approach for combustion safety can be adopted by all members of the building energy...

Document detailing how to build radon-resistant homes.

Source for information about Carbon Monoxide including health effects and measures to reduce exposure.

Website describing the CRI Green Label Plus low-VOC carpet labeling program.

This is a guide for establishing smoke-free policies in public housing and multifamily properties.

Fact sheet that details the steps needed to perform a combustion appliance safety inspection to determine if fossil fuel-fired appliances are operating safely under a depressurized condition.

Report documenting the results of an in-depth evaluation of thermal comfort for two potential net zero-energy homes (NZEHs) in Massachusetts.

Report telling consumers how radon gets into a home and how to reduce radon entry into a home.

Technical bulletin addressing surfacing options in regards to composite wood panels and their emission barrier capabilities.

Article describing the causes of wood decay and moisture issues.

Research report describing the development of standardized test methods for PM2.5 and CO2 sensors enabling reliable, low-cost indoor air quality monitoring and improvement.

A report describing six mechanical ventilation strategies that were evaluated for their ability to control indoor humidity levels over 14-day periods with simulated occupancy.

Report describing an investigation into multiple occupancy-based ventilation control strategies and the associated energy savings.

Webpage from U.S. Department of Energy describing using Earth-Sheltered home building techniques in hot climate zones.

This study evaluates the energy, humidity and indoor air quality implications of residential ventilation cooling in all US IECC climate zones.

This publication provides a set of best practices for improving indoor air quality in conjunction with energy upgrade work in homes.

Technical report describing the enhancement of energy efficiency in existing buildings through a systems approach, assessing airflow-focused retrofits for improved energy savings and indoor air quality, considering factors like air leakage, distribution system dynamics, duct leakage, and ventilation...

This report evaluates the performance of variable-capacity comfort systems, with a focus on inverter-driven, variable-capacity systems, as well as proposed system enhancements.

Technical report describing the evaluation of four different ventilation strategies for providing make-up air in high-performance, new construction multifamily buildings in the Northeast, emphasizing the challenges posed by increasing airtightness standards and the variability of system performance...

Report on the performance of range hood exhaust fans.

Fact sheet describing indoor air quality (IAQ), including information on common sources of indoor air pollutants and best practices for improving IAQ.

Report outlining how Smart ventilation controls (SVC) balance energy consumption, comfort, and IAQ by optimizing mechanical ventilation operation to reduce the heating and/or cooling loads, improve management of indoor moisture, and maintain IAQ equivalence according to ASHRAE 62.2.

Report comparing a high-performance house with a code-built control home.

Technical report on a field validation study that utilizes low-cost indoor air quality sensors to assess a smart ventilation system's effectiveness in maintaining acceptable indoor humidity in low-load homes in humid environments, revealing that while the smart ventilation algorithm demonstrated...

ASHRAE Q&A addressing HVAC filtration and disinfection for reducing the spread of COVID-19.

Page describing in detail four important actions you should consider to protect your health and indoor air quality (IAQ) when cleaning up after a flood.