Library

Report providing builders in marine climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Report describing measures that builders in mixed-humid climates can use to build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Article describing thermal bridging, construction practices that encourage thermal bridging, and solutions.

Report discussing opportunities and trends in the U.S. home performance contracting industry, along with market drivers such as consumer demand; federal, state, and local programs; and utility and non-governmental programs.

Article describing methods for thermally isolating a garage in a Passive House-certified multifamily building.

Report examining the structural properties and applications of an innovative studless building system, detailing its testing regime and providing an engineering guide for architects and engineers.

Report on the design and evaluation of extended plate and beam.

Case study on the design and evaluation of extended plate and beam, located in Mount Joy Pennsylvania.

Report describing advanced framing techniques, including discussion of cost and energy savings.

Report describing approaches to using less wood in home building that minimize waste.

Fact sheet describing advanced framing techniques that reduce the amount of lumber used in constructing wood-framed houses while providing more space for wall insulation.

Fact sheet describing advanced wall framing.

Website article interviewing the inventor of the Larsen truss, a history of its use, and a discussion of its advantages and disadvantages.

Report on adding insulation to load-bearing mass masonry buildings.

Standard providing a methodology for evaluating the installation quality of unitary HVAC systems.

DOE report characterizing market and technical barriers impeding broader utilization of fault detection technology for residential HVAC energy efficiency applications.

Brochure explaining the essential basis for advanced framing and some of the more common advanced framing details.

Document providing guidance to U.S. home builders who want to accept the challenge.

A book about structurally insulated panels.

Guide describing measures that builders in the cold and very cold climates can take to build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Report summarizing the guidelines for developing and reporting analytical results in a consistent and meaningful manner for all home energy uses.

Document illustrating some analysis concepts that are proven to be effective and reliable in analyzing the transient energy usage of advanced energy systems as well as of entire houses.

Report investigating implementation of advanced framing in both production and prototype built homes built in a variety of climate regions across the USA.

Report considers a number of promising wall systems that can meet the requirement for better thermal control.

Presentation about advanced framing techniques.

Document presenting some of the key technical properties of many of the most common building materials.

Website providing CAD files and drawings of advanced framing details.

Website providing information about building plans for the ENERGY STAR thermal bypass checklist.

Document with the Quality Control Checklist developed as both a guide to assist in the transition to high performance home building, and as a simplified tool to be used as part of any builder's on-site quality control procedures.

Report describing a deep energy retrofit project for a two-family wood framed home located in Belmont, Massachusetts.

Information sheet containing images and descriptions of cantilevers.

Book describing Carpentry and Construction, Construction Materials, Hand Tools, Power Tools, Construction Equipment, Jobsite Safety, and Working Conditions, Building Design and Print reading, Inspections Survey Instruments and Operations, Foundation and Outdoor Slab Construction, Floor, Wall, and...

Report summarizing the key opportunities, gaps, and barriers identified by the national laboratory white papers discussing long-term 50% energy reduction goals.

Document with information from a workshop addressing framing materials for residential buildings in California. A copy of the document can be requested at the resource link, and an online copy of the document can be found by searching for it on the California Energy Commission's Library Online...

Case study characterizing the framing factors for the exterior walls, ceilings, and floors of 180 wood-framed low-rise residential buildings across the United States.

Fact sheet describing the characteristics that make for a successful coastal residential building, including design and construction recommendations; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Research study comparing various retrofit models in Wisconsin to evaluate performance in terms of savings per home and program cost per home to assess the relative cost effectiveness of each program design.

Two hourly energy simulation software, BEopt and Energy Gauge USA, were compared to ensure accuracy and evaluate agreement on the impact of various energy efficiency improvements.

Document containing a 3D drawing (CAD) of advanced framing details.

Website providing building science based guidance and training for residential construction.

Guidance document on deep energy retrofits.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Design and Construction Process chapter provides detailed guidance for each process phase: pre-planning, planning, construction, test-out and post-occupancy.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Lessons Learned chapter focuses on successful deep energy retrofit projects throughout the U.S.

Report describing the progress toward and issues related to developing a usable, standardized, empirical data-based software accuracy test suite.

A website by the U.S. DOE highlighting the potential energy savings from upgrading energy inefficient windows with low-emissivity.

Website for finding policies and incentives by state for renewables and efficiency.

Journal article presenting a discussion of the state-of-the- art in electricity management in smart homes, the various enabling technologies that will accelerate this concept, and topics around consumer behavior with respect to energy usage.

Document providing a resource to help contractors renovate historic houses, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort.

ENERGY STAR factsheet describing the HVAC Quality Installation Program

Section 608 establishes EPA’s National Recycling and Emission Reduction Program designed to reduce emissions related to maintaining, servicing, repairing, and disposing of air conditioning or refrigeration equipment.