Library

This document covers how broken windows can allow wind and rain inside the house and even lead to roof failure.

Article describing what evaporative coolers are, how they work, different types, performance, where they are appropriate, and how to install and maintain them.

Report showing installers how to attach ducts, pipes, and associated equipment to buildings to minimize earthquake damage.

Report with guidance for installing windows with foam sheathing on wood-frame walls.

Article describing the insurance savings of a home with a hip roof versus a gable roof from the perspective of an insurance advisor.

Article describing how the configuration of surrounding buildings affects the wind loads on a hip roof in a low-rise building.

Article outlining the use of spray polyurethane foam in residential buildings.

Website providing a probabilistic map of the expected number of damaging earthquakes around the U.S.

Report discussing how to create livable space in the attic that meets IRC code requirements by either creating a ventilated roof assembly, or and unvented attic assembly.

Webpage describing benefits of adding battery storage to homes and an estimation tool.

Document from IBHS explaining how to inspect homes for earthquake preparedness and retrofit solutions for homes that have suffered structural damage as a result of earthquakes.

Article describing dozens of ideas on how to retrofit a home so it is more earthquake ready.

Guide describing tools for island and hurricane-prone communities on redevelopment and rehabilitation of homes to prepare for future natural disasters.

Web page describing how to identify heat-related illness and how to prevent it.

Article from University of Arizona on keeping homes cool during extreme heat, both personal and system changes.

Webpage describing how to conserve heat or find alternative heat sources during a power outage to keep one room warm.

Article showing steps for kick out flashing at roof-wall intersection.

Website describing the wildland-urban interface code and providing links to resources.

Paper describing vegetation impacts on cooling load for buildings.

2017 version of a standard covering requirements for single- and dual-pane windows, glazed side-hinged door systems, sliding doors, tubular daylighting devices, and unit skylights developed jointly by the American Architectural Manufacturers Association (AAMA), the Canadian Standards Association...

Guidance from EPA, HUD, NIH, and OSHA on worker and employer interactions with lead contaminants.

Website explaining the LEED v4.1 program and providing a portal for those who want to investigate or start a LEED project.

Test results used by multiple structural insulated panel manufacturers confirming a one-hour fire rating for specific SIP assemblies.

A publication describing how to protect coastal investments by adapting to natural processes and protecting coastal environments and shorelines.

Guide for homeowners describing actions they can take to modify their home and the surrounding site to create a survivable space to reduce the amount of damage a home would likely experience during a wildfire.

Article describing lessons for builders and changes to local building code in Colorado Springs in response to regional wildfires.

Factsheet describing the concept of load paths and the important connections in a wind uplift load path; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Guide describing sound mitigation measures to lower building natural disaster vulnerability to assist local officials and community decision makers in coastal areas.

News article describing the state of the residential battery storage market.

A webpage outlining CAL FIRE’s recommendations for creating defensible space.

Webpage from Boston Solar describing how solar plus storage options can be beneficial for maintaining electricity during power outages.

Web article describing many ways homeowners, contractors, and builders can make homes more resistant to hurricanes, tornadoes, high winds, floods, and hail.

Guidebook providing useful examples of high performance retrofit techniques for the building enclosure of wood frame residential construction in a cold and somewhat wet climate.

Siding installation guide for Ply Gem Siding Group products.

This Measure Guideline provides design and construction information for a deep energy enclosure retrofit solution of a flat roof assembly.

Report on two approaches to retrofitting existing double-stud walls.

Measure Guideline research report providing simple, long term, and durable solutions when using tapes and flashing membranes in conjunction with the exterior face of rigid polymeric foam sheathing to create the drainage plane of a wall system.

Guideline describing information and specifications relevant to air-seal existing attics.

Study investigating measured cooling energy savings in homes across the U.S. from the installation of roofing with higher solar reflectance.

Study investigating measured cooling energy savings from the installation of wall finishes with higher solar reflectance.

Paper describing energy savings in space cooling from shading condenser units.

Technical article presenting the results of an analysis on the effect of insect screens on window solar heat gain coefficients and U-values.

A presentation describing the standards regarding who is responsible for what part of the design to ensure the roof truss is properly designed and braced.

A Recovery Advisory guide reccomending practices for designing and installing metal roof systems that will enhance wind resistance in high-wind regions (i.e., greater than 90-miles per hour [mph] gust design wind speed).

Report covering the selection of roof vents for rainwater resistance.

Factsheet describing smart practices for minimizing damage to residential electrical service components during coastal and riverine flood events.

Standard using performance-based principles to determine dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, earthquake, wind, and fire loads, and their combinations for general structural design. This version of the standard was published in the year 2016 and is available in both digital...

Standard using performance-based principles to determine dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, seismic, and wind loads, and their combinations for general structural design. The current version of this standard was published in the year 2022 and is available in both digital...

Standard using performance-based principles to determine dead, live, soil, flood, snow, rain, atmospheric ice, earthquake, and wind loads, and their combinations for general structural design. This version of the standard was published in the year 2010 and is available in both digital and print...