Library

Article describing thermal bridging, construction practices that encourage thermal bridging, and solutions.

Report discussing opportunities and trends in the U.S. home performance contracting industry, along with market drivers such as consumer demand; federal, state, and local programs; and utility and non-governmental programs.

Article describing methods for thermally isolating a garage in a Passive House-certified multifamily building.

Report examining the structural properties and applications of an innovative studless building system, detailing its testing regime and providing an engineering guide for architects and engineers.

Report on the design and evaluation of extended plate and beam.

Case study on the design and evaluation of extended plate and beam, located in Mount Joy Pennsylvania.

Report describing advanced framing techniques, including discussion of cost and energy savings.

Report describing approaches to using less wood in home building that minimize waste.

Fact sheet describing advanced framing techniques that reduce the amount of lumber used in constructing wood-framed houses while providing more space for wall insulation.

Fact sheet describing advanced wall framing.

Website article interviewing the inventor of the Larsen truss, a history of its use, and a discussion of its advantages and disadvantages.

Report on adding insulation to load-bearing mass masonry buildings.

Brochure explaining the essential basis for advanced framing and some of the more common advanced framing details.

A book about structurally insulated panels.

Report presenting the building america research to market plan.

Report investigating implementation of advanced framing in both production and prototype built homes built in a variety of climate regions across the USA.

Report considers a number of promising wall systems that can meet the requirement for better thermal control.

Presentation about advanced framing techniques.

Document presenting some of the key technical properties of many of the most common building materials.

Website providing CAD files and drawings of advanced framing details.

Website providing information about building plans for the ENERGY STAR thermal bypass checklist.

Information sheet containing images and descriptions of cantilevers.

Document with information from a workshop addressing framing materials for residential buildings in California. A copy of the document can be requested at the resource link, and an online copy of the document can be found by searching for it on the California Energy Commission's Library Online...

Case study characterizing the framing factors for the exterior walls, ceilings, and floors of 180 wood-framed low-rise residential buildings across the United States.

Fact sheet describing the characteristics that make for a successful coastal residential building, including design and construction recommendations; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Document containing a 3D drawing (CAD) of advanced framing details.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Reducing costs and Increasing Cost-Effectiveness chapter provides suggestions for controlling deep retrofit costs, including both 'do's' and 'don'ts'.

A website by the U.S. DOE highlighting the potential energy savings from upgrading energy inefficient windows with low-emissivity.

Article in the SIPA Technical Bulletin (No. 11) comparing the earthquake resistance of light-frame wood shear wall construction to residential construction with structural insulated panels (SIPS).

Information sheet briefly summarizing double stud wall construction including the advantages and disadvantages of this construction strategy.

Information sheet briefly summarizing double stud with spray foam wall construction including the advantages and disadvantages of this construction strategy.

Information sheet briefly summarizing truss wall construction including the advantages and disadvantages of this construction strategy.

Report on high-R wall design called extended plate and beam that uses foam sheathing insulation with wall framing.

Guide providing information on using exterior foam insulating sheathing in building wall assemblies to enhance thermal performance.

Document providing supplemental information for code enforcement professionals about header hangers in bearing walls.

Brochure describing advanced framing techniques.

Brochure describing advanced framing techniques.

Research study investigating the factors influencing consumer adoption of HEDs and evaluating the resulting electricity consumption.

Guide discussing observations, recommendations, and technical guidance as a result of Hurricane Katrina

A document aimed at reducing the vulnerability of a gable end roof to wind damage in a hurricane.

Research study describing the impact resistance performance of advanced framed wall systems with insulating sheathing as the primary sheathing from wind blown debris.

Report on on lessons learned from building one multifamily home to the Zero Energy Ready Home program requirements.

Report discussing the importance of durability and energy efficiency in building construction.

Siding installation guide for Ply Gem Siding Group products.

Report on two approaches to retrofitting existing double-stud walls.

FEMA Mitigation Assessment Team Report describing damages from Hurricane Michael in Florida in Oct. 2018 and recommendations for future hurricane preparedness.

RESNET standards aimed to ensure that accurate and consistent home energy ratings are performed by accredited home energy rating providers through their raters nationwide.

Document providing supplemental information for code enforcement professionals about headers in nonbearing walls.

Article describing key takeaways from two symposia held during Building Innovation 2016: The National Institute of Building Sciences Fourth Annual Conference and Expo, including that resilience can be affordable and cost-effective.

Fact sheet describing how to install bracing to retrofit roof dormers for increased wind resistance.