Library

An NFPA Standard that identifies a method for determining the minimum water supply necessary for structural fire-fighting purposes in areas where it has been determined that there is no water or inadequate water for fire fighting.

An NFPA standards document that provides minimum requirements for the design, construction, installation, and maintenance of tanks and accessory equipment that supply water for private fire protection.

Guide providing information on controlling attic ductwork sweating.

Report providing guidance on protecting foundation walls and enclosures from flood damage.

Report covering wind loading on roofing assemblies.

Calculator to help in calculating pool volume.

Article describing how to properly manage condensing HVAC equipment.

Website providing guidance on how to reduce the risk of damage to a home from hail.

Research report describing study of exterior retrofit approach for air sealing, insulating, and water management conducted by the NorthernSTAR Building America Partnership team run by University of Minnesota.

Case study describing the External Thermal and Moisture Management System developed by the NorthernSTAR Building America Partnership for retrofitting roofs with rigid foam over the roof deck, especially on one and a half-story homes.

Report addressing flood, wind and seismic hazards and recommends several multi-hazard resistant foundation designs of manufactured homes.

Fact sheet describing the special considerations that must be made when installing utility equipment, such as fuel, sewage, and water/sewage lines in a coastal home, and presenting recommendations for utility protection; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction...

Information sheet including a checklist of steps to follow for pouring concrete.

Table calculating friction losses for PVC pipe by length.

Fact sheet describing design and construction practices to reduce the likelihood of water intrusion in walls and foundations in residential construction.

Document covering basic moisture control principles in the design of above-grade building enclosures; driving rain as a moisture load on walls; a classification system of the various rain control strategies available for walls; and good design practises for walls.

Report covering the performance of residential buildings during three hurricanes impacting Florida in 2004.

Document with important building science considerations, designed for members of the residential construction and remodeling industries, as well as owners and managers who work in affordable housing.

Report describing steps homeowners can take to improve the indoor air quality in their home, including ventilating, preventing pests, and reducing pollutants in the home.

Information sheet designed for the residential construction and remodeling industries, as well as owners and managers working in affordable housing. This sheet presents building guidance for both new construction and rehabilitation, as well as practices that can be used by property maintenance...

Report covering the reconstruction of flood damaged homes.

Report providing recommended designs and guidance for rebuilding homes destroyed by hurricanes in the Gulf Coast.

Report from FEMA on how to reduce damage from localized flooding including planning, drainage, building codes and retrofits, and regulations.

Guide discussing ways that homeowners in ground-secured houses can reduce the risks and damage caused by floods upon residential buildings.

An EPA guide describing the causes and impacts of summertime urban heat islands, promoting strategies for lowering temperatures in U.S. communities.

Technical bulletin describing National Flood Insurance Program (NFIP) requirements for flood openings in foundation walls and walls of enclosures below elevated buildings.

Website describing the U.S. Department of Energy's residential buildings program.

Website providing resources for seismic retrofits for builders and homeowners as well as city permit requirements from the City of Portland OR.

Resource that differentiates products in the marketplace that meet WaterSense requirements.

Report providing architects, designers, and homeowners with information to make house plans useful for constructing a more wind resilient structure.

Resource to help builders better understand the WaterSense requirements for labeled homes and assist them in meeting the criteria so they can receive the label for their new construction.

Factsheet providing homeowners with an overview of approaches for flashing and sealing roof penetrations to help discussion with a roofing contractor.

Article from the Institute of Biological Engineering describing reverse osmosis water softeners.

Report describing how to construct a frost protected shallow foundation (FPSF) as a practical alternative to a deeper, more-costly foundation in cold regions with seasonal ground freezing and the potential for frost heave.

Manual describing methods for rodent-proofing buildings.

Reports describing a mathematical methodology for assessing the seismic performance of buildings.

Report from FEMA describing techniques for floodproofing structures.

A website providing information on how to properly size a water heater based on tank size, volume, peak hour demand and other factors.

How hard can it be to insulate a flat sheet of concrete? I mean you only have three choices – on the top, on the bottom, or on the edge. OK, you might have some combination of the three as well.

Report describing a comparison of hydrothermal performances of DryRightTM fiberglass batts and kraft-faced fiberglass batts in a south facing wall assembly with a moisture storage cladding material.

Specification describing criteria for manufactured polymeric materials used to provide a rainscreen function, a means for the drainage of liquid moisture and the ventilation of vapor moisture that enters an above-grade exterior wall assembly which was published in the year 2019, and is available for...

Document providing information on correct storage techniques for lumber to manage moisture.

Document describing correct construction of swales, designed to trap particulate pollutants (suspended solids and trace metals), promote infiltration, and reduce the flow velocity of storm water runoff.

Article describing ways to protect roofs from water infiltration by using self-adhering underlayment in vulnerable locations such as roof valleys, eave edges (to help deal with ice dams), rake edges, roofs to vertical walls (such as dormers), sidewall protection, the bottom of dormer valleys, and...

Document describing issues of wind pressure resistance in walls with exterior rigid foam sheathing installed directly over framing members.

Resource manual for builders, designers, architects, plumbers, and others interested in the WaterSense Labeled Homes Program providing an overview of the program, explains how to meet the program requirements, gives descriptions of water-saving technologies, and provides links to further resources.

Brochure describing insulation approaches for homes with slab-on-grade floors.

Brochure with information about how to select and install house wrap and other weather-resistive barriers.

Fact sheet describing water management in a residential building.