Library

FEMA mitigation assessment team report following Hurricane Charley in Florida including observations, recommendations, and technical guidance for retrofitting hurricane-damaged homes.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Document describing guidance and requirements for flood openings in walls at and below grade.

Document about development of a new test procedure to increase the quality and accuracy of energy analysis tools for the building retrofit market.

Report providing guidance on protecting foundation walls and enclosures from flood damage.

Report presenting performance results from tests conducted on an energy efficiency retrofit project in Stockton, California.

Paper examining the monitored performance of four newly constructed near zero energy homes in Florida.

Report briefly reviewing past research on the effects of occupant behavior on residential energy use and then covering a two year pilot evaluation of a low cost residential energy feedback system installed in twenty case study homes in Florida.

Report briefly reviewing past research on the effects of occupant behavior on residential energy use and then covering a two year pilot evaluation of a low cost residential energy feedback system installed in twenty case study homes in Florida.

Information sheet including a checklist of steps to follow for pouring concrete.

Report designed to help a builder understand quality management and its role in transitioning from conventional to HPH building and remodeling.

Fact sheet describing design and construction practices to reduce the likelihood of water intrusion in walls and foundations in residential construction.

Document with important building science considerations, designed for members of the residential construction and remodeling industries, as well as owners and managers who work in affordable housing.

Report covering the reconstruction of flood damaged homes.

Report providing recommended designs and guidance for rebuilding homes destroyed by hurricanes in the Gulf Coast.

Guide discussing ways that homeowners in ground-secured houses can reduce the risks and damage caused by floods upon residential buildings.

Website describing the U.S. Department of Energy's residential buildings program.

Paper covering a parametric study of foundation heat exchanger-based ground source heat pump systems for several house configurations in a range of European locations, with an emphasis on determining feasible combinations.

Website providing resources for seismic retrofits for builders and homeowners as well as city permit requirements from the City of Portland OR.

Report providing architects, designers, and homeowners with information to make house plans useful for constructing a more wind resilient structure.

Report summarizing the results of laboratory testing of 20 advanced power strip products.

Report about a tool developed to enable users to compare a typical 1970s ranch home against an IECC 2009 code-compliant home of the same configuration and against the 70s base case plus retrofits.

Report describing how to construct a frost protected shallow foundation (FPSF) as a practical alternative to a deeper, more-costly foundation in cold regions with seasonal ground freezing and the potential for frost heave.

Manual describing methods for rodent-proofing buildings.

Research report detailing Florida Solar Energy Center (FSEC) partnership with Manatee County Habitat for Humanity to design a compact, Zero Energy Ready Home in Florida, tackling challenges like equipment sizing and indoor air quality, offering insights for projects surpassing building code...

Reports describing a mathematical methodology for assessing the seismic performance of buildings.

Report summarizing commissioning, short-term testing, and analysis that occurred before, during, and just after the actual retrofit of the Bay Ridge project.

How hard can it be to insulate a flat sheet of concrete? I mean you only have three choices – on the top, on the bottom, or on the edge. OK, you might have some combination of the three as well.

Manual that identifies certain leakage limits for ducts and outlines procedures for testing ducts for conformity with air leakage limits that are set forth in a designer’s project specification.

Research study presenting a unique opportunity to both identify and evaluate deep retrofit measures that are practical and potentially cost effective for the retrofit market, as well as review the cost effectiveness of the Passive House design approach for achieving energy savings in deep retrofits.

Standard describing methods for testing the airtightness of buildings and HVAC equipment.

Test method designed to calculate an assigned air permeance of flexible sheet or rigid panel-type materials at a reference air pressure differential of 75 Pa which was published in the year 2021 and is available for preview and purchase at the reference link.

Test method providing a rapid means of determining the steady-state thermal transmission properties of thermal insulations and other materials with a high level of accuracy when the apparatus has been calibrated appropriately. This version of the standard was published in the year 2021 and is...

ASTM standard test method for surface burning response of different building materials which was published in the year 2022 and is available for preview and purchase at the reference link.

ASTM standard test method for testing the surface burning response of different building materials which was published in the year 2023 and is available for preview and purchase at the reference link.

Standard that describes the principles for the design of a hot box apparatus and the minimum requirements for the determination of steady state thermal performance of building assemblies when exposed to controlled laboratory conditions. The current version of the standard was published in 2019, and...

Test method designed to obtain reliable values for the WVTR of plastic film and sheeting which was published in the year 2020 and is available for preview and purchase at the reference link.

Report intending to provide useful information as the DOE/BA develops and implements comprehensive communications and outreach strategies for demonstration homes.

Report evaluating a test home built in Atlanta, GA in the mixed-humid climate zone. The report outlines the features of the house, discusses the implementation of the energy efficient design, and presents the results of short-term characterization testing.

Document about NREL's repository of residential building characteristics and historical energy use data, used to improve accuracy of residential energy analysis tools.

Brochure describing insulation approaches for homes with slab-on-grade floors.

Fact sheet describing water management in a residential building.

Report using data from various sources to characterize the impact on human health and property damage from indoor environmental quality and other hazards.

FSEC certification and testing page for solar systems.

Report proposing a procedure for estimating the whole opaque wall R-value (whole-wall R-value), independent of system type and construction materials.

Information sheet with methods for constructing or retrofitting basements to reduce moisture issues.

Report addressing the ever increasing percentage of whole house energy use that is attributable to miscellaneous electricity loads (MELs) and major appliances.

Presentation describing the challenges of insulating an existing basement, presented to the Building America residential energy-efficiency stakeholder meeting.

Technical fact sheet highlighting important building connections and illustrating the proper use of various types of connection hardware; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Document describing the measured annual performance data from 12 recent-vintage very low energy homes in the US.