Library

Document describing wall bracing techniques and suggestions for the city of Verona, WI building department.

A guide describing how to do wall bracing calculations and evaluations.

A builder checklist guide for the water management of properties with appropriately-designed building technologies.

AIA CEU course covering design considerations for below-grade waterproofing for new construction, the types of below-grade systems available, and specific concerns associated with waterproofing deep foundations.

Web page providing statistics on weather related fatalities and injuries.

Manual showing how to properly use grass swales to manage excess water runoff.

Report providing design guidance for wood-framed residential construction in high wind areas where design wind velocity requirements do not exceed 140 miles per hour.

An article describing a way to protect drain and ventilation holes in brick veneer siding against pests. Selecting a fine screen mesh opening (1/55-inch or 0.5-mm) is important to guard against small insects such as subterranean termites.

Conference paper presented at the 8th International Conference on Thermal Performance of Exterior Envelopes of Whole Buildings describing moisture from basements and crawlspaces as a source of indoor humidity and providing recommendations for finishing below-grade spaces to limit potential indoor...

Study showcasing the location of the highest uplift force on the hip, ridge, and perimeter regions of roofs, and thus roofing material needs for the most fasteners and adhesive at these locations.

Study analyzing wind pressures on hip roofs where two hip roofs come together forming an L or T shaped roof or building.

Guide presents mitigation measures in a Mitigation Package which combined set of retrofit measures that must be implemented for a house to provide a defined level of protection; identifies three successive Mitigation Packages: Basic, Intermediate, and Advanced. Implementing the Mitigation Packages...

Report providing guidance on how to improve the wind resistance of existing residential buildings in Mississippi and across the Gulf Coast.

Article discussing structural and nonstructural building components and illustrates a variety of wind-induced damages, including wind-driven rain infiltration.

Fact sheet describing impact-resistant window systems with specifics on Florida’s building codes.

Website providing consumers with general guidance on preparing for and surviving a winter storm.

Website providing information to prepare for winter storms, prevent cold temperature-related health problems, and protect yourself during all stages of a winter storm.

Catalog detailing the metal connector products manufactured by Simpson Strong-Tie and their applications and strengths.

Manual providing engineered and prescriptive design requirements for wood frame construction used in one and two-family dwellings.

A hurricane retrofit guide describing techniques for strengthening roof-to-wall connections for family homes.