Library

Fact sheet describing a report providing best practices for reducing damages from floods to manufactured homes.

Fact sheet providing an overview of the FEMA document Wind Retrofit Guide for Residential Buildings.

Guide providing engineering seismic design and building practices based on post-earthquake research.

Article describing thermal bridging, construction practices that encourage thermal bridging, and solutions.

Article describing methods for thermally isolating a garage in a Passive House-certified multifamily building.

Report describing advanced framing techniques, including discussion of cost and energy savings.

Report describing approaches to using less wood in home building that minimize waste.

Fact sheet describing advanced framing techniques that reduce the amount of lumber used in constructing wood-framed houses while providing more space for wall insulation.

Fact sheet describing advanced wall framing.

Article describing how an airtight home shell helps achieve a tight envelope that is energy efficient and cost effective.

Website article interviewing the inventor of the Larsen truss, a history of its use, and a discussion of its advantages and disadvantages.

Report describing approaches to insulating basements in homes built to meet Energy Star levels of performance of heat loss reduction.

Article from California Earthquake Authority on the benefits of retrofitting homes to withstand earthquake forces, with a focus on foundations, walls, and chimneys.

A book about structurally insulated panels.

Report investigating implementation of advanced framing in both production and prototype built homes built in a variety of climate regions across the USA.

Presentation about advanced framing techniques.

Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

Website providing CAD files and drawings of advanced framing details.

Website providing information about building plans for the ENERGY STAR thermal bypass checklist.

Report about the fundamental concepts that must be understood at the planning or initial nspection of existing homes regarding surface and ground water management.

Information sheet containing images and descriptions of cantilevers.

Article describing correct ways to eliminate water damage by incorporating a sacrificial layer to foundation walls and footings.

Document with information from a workshop addressing framing materials for residential buildings in California. A copy of the document can be requested at the resource link, and an online copy of the document can be found by searching for it on the California Energy Commission's Library Online...

Case study characterizing the framing factors for the exterior walls, ceilings, and floors of 180 wood-framed low-rise residential buildings across the United States.

Report aimed to quantify the impact of closed crawlspaces in new homes, and investigate modeling software to ensure accuracy of energy consumption predictions in these homes.

Guide about designing and installing closed crawlspaces in the Southeast.

Fact sheet describing the characteristics that make for a successful coastal residential building, including design and construction recommendations; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Volume 1 of a two-volume report providing a comprehensive approach to planning, siting, and risk management for homes constructed in coastal environments.

Website discussing building foundation problems caused by settling soil in Colorado.

Document containing a 3D drawing (CAD) of advanced framing details.

Information guide describing issues with concrete floors, in multiple climate zones.

Document discussing moisture considerations and testing techniques for concrete floors.

Report covering insulating crawlspaces.

Article describing the process of constructing concrete walls

Report providing guidance on designing buildings to be flood resistant.

A website by the U.S. DOE highlighting the potential energy savings from upgrading energy inefficient windows with low-emissivity.

Report providing an introduction to the NEHRP recommended seismic provisions for new buildings and other structures.

Article in the SIPA Technical Bulletin (No. 11) comparing the earthquake resistance of light-frame wood shear wall construction to residential construction with structural insulated panels (SIPS).

Information sheet with details on a building enclosure designed for Albuquerque, NM, as an example for building enclosures built for hot-dry and mixed-dry climates.

Information sheet briefly summarizing double stud wall construction including the advantages and disadvantages of this construction strategy.

Information sheet briefly summarizing double stud with spray foam wall construction including the advantages and disadvantages of this construction strategy.

Information sheet briefly summarizing truss wall construction including the advantages and disadvantages of this construction strategy.

Study characterizing how foundation heat exchangers (FHXs) used in residential ground source heat pump systems represent a potential cost savings due to their lesser first cost over other types of heat exchangers.

Documents describing the similarities and differences between the National Flood Insurance Program (NFIP) minimum requirements and the requirements of the International Codes® (I-Codes®) and ASCE 24, Flood Resistant Design and Construction, a standard referenced by the I-Codes., and illustrating...

Fact sheet discussing designs for prefabricated safe rooms built to ICC 500 standards mentioned in FEMA P-361.

Report describing dry floodproofing technologies for non-residential buildings, including information about regulatory requirements, design considerations, and descriptions of floodproofing methods and equipment.

Article describing the effective R-values of various subslab insulation products, including foil bubble pack.

Checklist highlighting the requirement for metal structural connections and materials fasteners used to retrofit or construct FORTIFIED buildings less than 3,000 ft from saltwater to be suitably protected from corrosion.

Checklist intending to clarify FORTIFIED Home™ eligibility requirements that relate to a home’s foundation.

Handbook providing guidance on the design and construction of foundations for homes, including insulation, air sealing, and water management details for basements, crawlspaces, and slabs.