Library

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Report covering wind loading on roofing assemblies.

Fact sheet describing flashing of roof penetrations to make a home more resistant to high winds, hurricanes, and rainwater intrusion.

Fact sheet describing proper roof sheathing installation and illustrating fastening methods that will enhance the durability of a building in high-wind areas; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Guide describing the installation of windows in walls that have foam plastic insulating; guide provides several methods for attaching, supporting, and flashing windows in walls with rigid foam sheathing. (Note: The link only goes to the table of contents for the guide, the full guide can be...

Article describing ways to protect roofs from water infiltration by using self-adhering underlayment in vulnerable locations such as roof valleys, eave edges (to help deal with ice dams), rake edges, roofs to vertical walls (such as dormers), sidewall protection, the bottom of dormer valleys, and...

Conference paper describing testing of the performance of fasteners used to attach rigid foam insulation to the exterior of walls.

Information sheet describing correct application of stucco.

Discussion of building sheathing.

Fact sheet describing best practices for flashing doors and windows to minimize air and water intrusion.

Fact sheet describing water management in a residential building.

Article describing the evolution of the IRC to permit class 3 vapor retarders (latex paint) in walls coupled with exterior continuous insulation to allow drying and reduce condensation risk.

Article describing tips for effectively installing weatherstripping on windows and doors.

Case study about a structural sheathing product composed of enhanced EPS rigid foam with OSB adhered on one side.

Guide providing information about controlling rainwater through use of drainage planes.

Article describing a method for flashing roof vent boots, describing how to flash the pipe, how to flash over and under the pan, and finish by shaping the shingles, as well as addressing potential water leakage by adding an additional seal with EPDM flashing tape with a butyl adhesive backing to the...

Article describing how to weatherproof dormers using peel-and-stick membranes when flashing a dormer.

Article describing an overview of weatherstripping requirements.