Library

Website providing guidance on how to reduce the risk of damage to a home from hail.

Research report describing study of exterior retrofit approach for air sealing, insulating, and water management conducted by the NorthernSTAR Building America Partnership team run by University of Minnesota.

Case study describing the External Thermal and Moisture Management System developed by the NorthernSTAR Building America Partnership for retrofitting roofs with rigid foam over the roof deck, especially on one and a half-story homes.

Report addressing flood, wind and seismic hazards and recommends several multi-hazard resistant foundation designs of manufactured homes.

Fact sheet describing the special considerations that must be made when installing utility equipment, such as fuel, sewage, and water/sewage lines in a coastal home, and presenting recommendations for utility protection; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction...

Table calculating friction losses for PVC pipe by length.

Website with information about radon-resistant construction techniques and other radon resources for builders, contractors and homebuyers.

Fact sheet describing design and construction practices to reduce the likelihood of water intrusion in walls and foundations in residential construction.

Document covering basic moisture control principles in the design of above-grade building enclosures; driving rain as a moisture load on walls; a classification system of the various rain control strategies available for walls; and good design practises for walls.

Report covering the performance of residential buildings during three hurricanes impacting Florida in 2004.

Document with important building science considerations, designed for members of the residential construction and remodeling industries, as well as owners and managers who work in affordable housing.

Report describing steps homeowners can take to improve the indoor air quality in their home, including ventilating, preventing pests, and reducing pollutants in the home.

Information sheet designed for the residential construction and remodeling industries, as well as owners and managers working in affordable housing. This sheet presents building guidance for both new construction and rehabilitation, as well as practices that can be used by property maintenance...

Report from FEMA on how to reduce damage from localized flooding including planning, drainage, building codes and retrofits, and regulations.

An EPA guide describing the causes and impacts of summertime urban heat islands, promoting strategies for lowering temperatures in U.S. communities.

Technical bulletin describing National Flood Insurance Program (NFIP) requirements for flood openings in foundation walls and walls of enclosures below elevated buildings.

IECC code note explaining new fan efficacy requirements, along with how to determine which fans are affected by the new fan requirements.

Resource that differentiates products in the marketplace that meet WaterSense requirements.

Resource to help builders better understand the WaterSense requirements for labeled homes and assist them in meeting the criteria so they can receive the label for their new construction.

Factsheet providing homeowners with an overview of approaches for flashing and sealing roof penetrations to help discussion with a roofing contractor.

Article from the Institute of Biological Engineering describing reverse osmosis water softeners.

This research paper outlines residential HVAC advanced controls and sensors. It includes a technology review, applications, maintenance and commissioning, occupant behavior and a summary of the state-of-the-art technologies for advanced controls for residential HVAC.

Report describing how to construct a frost protected shallow foundation (FPSF) as a practical alternative to a deeper, more-costly foundation in cold regions with seasonal ground freezing and the potential for frost heave.

Report from FEMA describing techniques for floodproofing structures.

A website providing information on how to properly size a water heater based on tank size, volume, peak hour demand and other factors.

How hard can it be to insulate a flat sheet of concrete? I mean you only have three choices – on the top, on the bottom, or on the edge. OK, you might have some combination of the three as well.

Report describing a comparison of hydrothermal performances of DryRightTM fiberglass batts and kraft-faced fiberglass batts in a south facing wall assembly with a moisture storage cladding material.

Specification describing criteria for manufactured polymeric materials used to provide a rainscreen function, a means for the drainage of liquid moisture and the ventilation of vapor moisture that enters an above-grade exterior wall assembly which was published in the year 2019, and is available for...

Test method that measures the capture efficiency of wall-mounted domestic range hoods under controlled conditions in a test chambers which available for preview and purchase at the link and was published in the year 2018.

Document providing information on correct storage techniques for lumber to manage moisture.

Document describing correct construction of swales, designed to trap particulate pollutants (suspended solids and trace metals), promote infiltration, and reduce the flow velocity of storm water runoff.

Article describing ways to protect roofs from water infiltration by using self-adhering underlayment in vulnerable locations such as roof valleys, eave edges (to help deal with ice dams), rake edges, roofs to vertical walls (such as dormers), sidewall protection, the bottom of dormer valleys, and...

Document describing issues of wind pressure resistance in walls with exterior rigid foam sheathing installed directly over framing members.

Question and Answer article in Energy Design Update describing the cost and savings benefits of electronically commutated motors (ECMs) for HVAC equipment.

Resource manual for builders, designers, architects, plumbers, and others interested in the WaterSense Labeled Homes Program providing an overview of the program, explains how to meet the program requirements, gives descriptions of water-saving technologies, and provides links to further resources.

Brochure with information about how to select and install house wrap and other weather-resistive barriers.

Fact sheet describing water management in a residential building.

This TechNote provides an overview of building code requirements and best practices for flashing at window and door frames.

Article describing a research study exploring how effective interior insulation systems are at keeping basements dry and warm.

Article describing a field study that test ventilation performance in nine homes and found current ventilation was inadequate to remove PM2.5 and CO2 levels; however, a directly exhausting range hood can reduce peak PM2.5 concentrations by 75% or more.

A field guide with residential construction best practices.

Manuals describing design, materials, and installation techniques applicable to almost all types of roof systems; four-volume set includes Metal Panel and SPF Roof Systems, Membrane Roof Systems, Architectural Metal Flashing and Condensation and Air Leakage Control, and Steep-Slope Roof Systems.

Article describing the evolution of the IRC to permit class 3 vapor retarders (latex paint) in walls coupled with exterior continuous insulation to allow drying and reduce condensation risk.

Case study about a structural sheathing product composed of enhanced EPS rigid foam with OSB adhered on one side.

Guide addressing troubleshooting and frequently asked questions about water pressure.

Guide providing information about controlling rainwater through use of drainage planes.

Information sheet describing the function of a vapor barrier, and methods to retard the migration of water vapor.

Presentation describing the challenges of insulating an existing basement, presented to the Building America residential energy-efficiency stakeholder meeting.

EPA WaterSense guidance on urinals.