Library | Building America Solution Center

Showing 101 - 150 of 271 results:

Fans to Reduce Cooling Costs in the Southeast

1985

Florida Solar Energy Center

FSEC

FSEC PDF guide on effective fan types and placement in the Southeast.

FAQs -- After Gutting a Flooded Home

2020

Louisiana State University College of Agriculture

LSU AgCenter

Webpage from LSU AgCenter answering frequently asked questions after gutting a flooded home, including mitigation strategies for future floods.

Fastening Furring Strips to a Foam-Sheathed Wall

2010

Holladay Martin

Green Building Advisor,

GBA

Information sheet about what length screws should be used, and how closely to space the screws when fastening furring strips to a foam-sheathed wall.

FB Cavity Barrier – Fire rated ventilated cavity barrier

2021

Odice

An example of a commercially available thermally expansive fire stopping product for controlling the spread of fires in a rainscreen cavity.

FEMA Continuous Load Path

2023

Federal Emergency Management Agency

FEMA

Article explaining what a continuous load path is and the key connection points that make it up.

Field Energy Performance of an Insulating Concrete Form (ICF) Wall

2012

Maref Wahid,

et al.

National Research Council Canada,

NRC,

ResearchGate

Research study evaluating the dynamic heat transmission characteristics through two identical Insulating Concrete Form (ICF) wall assemblies in Ottawa, Canada.

Fire Protection of Facades

2017

Marija Jelčić Rukavina,

Milan Carević,

Ivana Banjad Pečur

University of Zagreb

A guide for designers, architects, engineers, and fire experts on how to design rainscreen and ventilated cavities such that they don’t contribute to the spread of a fire.

Flow-Through Assemblies, BSI-091

2016

Lstiburek Joseph W

Building Science Corporation,

BSC

Article discussing flow-through assemblies of walls.

Foam Shrinks, and Other Lessons, PA-1201

2012

Lstiburek Joseph W

Building Science Corporation,

BSC

Journal article describing lessons learned from updating a 16-year-old deep-energy retrofit.

Fold-Form

2006

Owens Corning Insulation

Information sheet with manufacturer specifications about insulated concrete forms.

Fort Devens: Cold Climate, Energy-Efficient, Market-Rate Townhomes

2013

Zoeller William,

Grab Joanna,

Slattery Matt

Consortium for Advanced Residential Buildings,

CARB,

Steven Winter Associates,

SWA,

U.S. Department of Energy,

DOE

Report about development of effective strategies to reduce the overall building energy use in line with Building America goals in this modestly priced market rate project.

Gossamer Wind Ceiling Fans

2014

Florida Solar Energy Center,

University of Central Florida

FSEC,

UCF

Website providing information about the Gossamer Wind Series Ceiling fans, conceived by Danny Parker at the Florida Solar Energy Center as a means of realizing the energy efficiency and comfort potential of ceiling fans.

Guide to Insulating Sheathing

2007

Building Science Corporation

BSC

Guide providing information on using exterior foam insulating sheathing in building wall assemblies to enhance thermal performance.

HardiPlank Lap Siding Butt Joint Flashing

2021

Fratzel Todd

Home Construction and Improvement

A article about the best practice method of installing fiber cement siding, to install flashing at the butt joints of the siding boards, rather than face caulking the butt joints afterwards.

Header Hangers in Bearing Walls, Code Notes Article 126

2011

U.S. Department of Energy

DOE

Document providing supplemental information for code enforcement professionals about header hangers in bearing walls.

Heat Island Group - Berkeley Lab

2023

Heat Island Group,

Lawrence Berkeley National Laboratory

LBNL

LBNL webpage introducing heat island effect and cool materials concepts, and providing links to LBNL pages explaining cool pavements, cool roofs, and cool walls.

High Performance Builder Spotlight: NextGen Home, Las Vegas, Nevada

2009

U.S. Department of Energy

DOE

Case study of new home construction in the hot-dry and mixed-dry climate zones.

High Performance Building Details - Advanced Framing I

2010

Steven Winter Associates,

Consortium for Advanced Residential Buildings

CARB,

SWA

Brochure describing advanced framing techniques.

High Performance Walls in Hot-Dry Climates

2015

Hoeschele Marc,

et al.

Alliance for Residential Building Innovation,

ARBI,

Davis Energy Group,

National Renewable Energy Laboratory,

NREL,

U.S. Department of Energy,

DOE

Article from NREL on wall construction guidelines for homes in hot climate zones.

High-R Roofs Case Study Analysis, BA-1006

2009

Straube John,

Grin Aaron

Building Science Corporation,

BSC

Report that considers a number of promising wall systems that can meet the requirement for better thermal control.

High-R Walls for New Construction Structural Performance: Integrated Rim Header Testing

2013

Wiehagen Joseph,

Desjarlais Andre O,

Kochkin Vladimir

NAHB Research Center,

National Renewable Energy Laboratory,

NREL

Report providing testing methodology to evaluate structural rim header designs over openings up to 6 ft. wide and applicable to one- and two-story homes.

High-R Walls for New Construction Structural Performance: Wind Pressure Testing

2013

Desjarlais Andre O,

Kochkin Vladimir

NAHB Research Center,

National Renewable Energy Laboratory,

NREL

Report with test results that serve as a baseline of data for further material tests of other high-R wall systems and for comparison to whole-house wind pressure testing.

High-R Walls for Remodeling: Wall Cavity Moisture Monitoring

2012

Wiehagen Joseph,

Kochkin Vladimir

NAHB Research Center,

National Renewable Energy Laboratory,

NREL

Research study presenting results of an existing home monitoring project designed to measure wall cavity moisture characteristics.

Hockey Pucks and Hydrostatic Pressure, BSI–057

2012

Lstiburek Joseph W

Building Science Corporation,

BSC

Report covering control of hydrostatic pressure in wall assemblies.

Home Builder's Guide to Construction in Wildfire Zones - Technical Fact Sheet Series, FEMA P-737

2008

Federal Emergency Management Agency

FEMA

Report providing a collection of fact sheets describing guidance for constructing homes in wildfire zones.

Home Ventilating Institute

2020

Home Ventilating Institute

Website providing certified rating programs to help manufacturers, builders, contractors and homeowners compare performance of ventilation products for air flow, sound, and other performance characteristics.

House Siding Options, Plus Costs, Pros & Cons 2020

2020

Siding Cost Guide

A starting point for ballparking and comparing the cost of different siding materials and a brief overview of the pros and cons of different siding materials.

How Much Ventilation Do I Need?

2018

Home Ventilating Institute

Website with articles on home ventilation and indoor air quality.

How to Verify New Construction Compliance

2020

IBHS Fortified

IBHS

Checklist for verifying FORTIFIED levels and documentation needed.

How You can Strengthen Your Home for the Next Big Earthquake in the Los Angeles Area

2005

City of Los Angeles,

Department of Building and Safety

City of Los Angeles

Report describing ways to retrofit a home to make it more resistant to earthquakes.

Hurricane Katrina in the Gulf Coast: Mitigation Assessment Team Report, Building Performance Observations Recommendations and Technical Guidance, FEMA 549

2006

Federal Emergency Management Agency

FEMA

Guide discussing observations, recommendations, and technical guidance as a result of Hurricane Katrina

Hurricane Mitigation Retrofits for Existing Site-Built Single-Family Residential Structures

2006

Florida Building Code

Code describing the requirements for existing site-built single-family homes to receive roof-to-wall retrofits when re-roofing.

Hurricane Retrofit Guide - Wood Frame Walls

2010

Florida Disaster

Florida Division of Emergency Management

Report describing the hurricane retrofit guide with focus on walls and wooded framed walls.

HVI Airflow Test Procedure

2015

Home Ventilating Institute

HVI

Publication specifying HVI’s prescriptive procedures for testing and rating airflow of residential ventilation products in accordance with ANSI consensus standards.

HVI Certification Program Policies and Procedures

2020

Home Ventilating Institute

HVI

Publication describing the requirements and procedures for the certified performance ratings program for residential ventilation products administered by the Home Ventilating Institute.

HVI Certified Products Directory

2020

Home Ventilating Institute

HVI

Website providing an online directory of more than 3,600 residential ventilation products lisiting flowrates, sones, watts, and other performance metrics; all listed products have been tested by the Home Ventilating Institute.

Hybrid Wall Evaluation for Ten New Construction Homes in Wyandotte, Michigan

2013

Lukachko Alex,

Grin Aaron,

Bergey Daniel

Building Science Corporation,

BSC

Report detailing the design and construction of 10 new houses under the Wyandotte Neighborhood Stabilization Program 2.

Hygric Redistribution in Insulated Assemblies: Retrofitting Residential Envelopes Without Creating Moisture Issues

2013

Lstiburek Joseph W,

Smegal Jonathan

Building Science Corporation,

BSC

Report exploring four questions to determine the level of risk associated with adding drained exterior insulation to the exterior of an existing home during an energy retrofit.

ICC-ES Evaluation Report, ESR-1679

2021

ICC Evaluation Service

ICC-ES Evaluation Report reviewing proprietary steel shear wall panels developed by Simpson Strong-Tie Company to resist vertical and lateral loads in walls resulting from wind or earthquakes.

Impact of Residential Mechanical Ventilation on Energy Cost and Humidity Control

2014

Martin Eric

Building Science Corporation,

BSC,

Florida Solar Energy Center,

FSEC,

Integrated Building and Construction Solutions,

IBACOS

The study described in this white paper is based on building energy modeling with an important focus on the indoor humidity impacts of ventilation.

Impact Resistance of Brick Veneer Structures to Hurricane Debris

2005

Bennett Richard M,

et al.

Canada Masonry Design Centre,

CMDC

An impact test report from projectile missile tests against brick veneer, verifying that brick veneers perform well to resisting hurricane force wind driven debris.