Showing 1 - 12 of 12 results:
Application of Spray Foam Insulation Under Plywood and Oriented Strand Board Roof Sheathing, BA-1312
Publication Date
·
Author(s)
Grin Aaron,
Smegal Jonathan,
Lstiburek Joseph W
·
Organization(s)
Building Science Corporation,
BSC
Description
Report covering moisture and leakage issues associated with spray foam insulation application to the underside of roof sheathing.
Publication Date
·
Author(s)
Building Science Corporation
·
Organization(s)
BSC
Description
Document presenting some of the key technical properties of many of the most common building materials.
Publication Date
·
Author(s)
Baker Peter,
Eng P,
LePage Robert
·
Organization(s)
Building Science Corporation,
BSC
Description
Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.
Publication Date
·
Author(s)
Kochkin Vladimir,
Wiehagen Joseph
·
Organization(s)
U.S. Department of Energy,
DOE
Description
The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...
Publication Date
·
Author(s)
Hoeschele Marc,
et al.
·
Organization(s)
Alliance for Residential Building Innovation,
ARBI,
Davis Energy Group,
National Renewable Energy Laboratory,
NREL,
U.S. Department of Energy,
DOE
Description
Article from NREL on wall construction guidelines for homes in hot climate zones.
Publication Date
·
Author(s)
Martin Eric
·
Organization(s)
Building Science Corporation,
BSC,
Florida Solar Energy Center,
FSEC,
Integrated Building and Construction Solutions,
IBACOS
Description
The study described in this white paper is based on building energy modeling with an important focus on the indoor humidity impacts of ventilation.
Publication Date
·
Author(s)
Springer David,
Dakin Bill,
German Alea
·
Organization(s)
Alliance for Residential Building Innovation,
ARBI,
National Renewable Energy Laboratory,
NREL,
Davis Energy Group,
U.S. Department of Energy,
DOE
Description
Guide describing proper application, design, and installation of mechanical ventilation cooling systems for homes located in hot-dry and cold-dry climates, as well as a means of understanding the benefits, costs, and tradeoffs of these systems.
Publication Date
·
Author(s)
U.S. Environmental Protection Agency
·
Organization(s)
EPA
Description
This page provides important information on how to protect yourself and your family if you suspect that you might have vermiculite insulation from Libby, Montana.
Publication Date
·
Author(s)
Metzger Cheryn E,
Goyal Siddharth,
Baechler Michael C
·
Organization(s)
Pacific Northwest National Laboratory,
PNNL
Description
This research paper outlines residential HVAC advanced controls and sensors. It includes a technology review, applications, maintenance and commissioning, occupant behavior and a summary of the state-of-the-art technologies for advanced controls for residential HVAC.
Publication Date
·
Author(s)
U.S. Department of Energy
·
Organization(s)
DOE
Description
Information sheet about types and installation of insulation.
Publication Date
·
Author(s)
Fairey Philip W,
et al.
·
Organization(s)
Florida Solar Energy Center,
FSEC,
American Council for an Energy-Efficient Economy,
ACEEE
Description
Preliminary results of two monitored lab homes constructed to represent the thermal characteristics of typical existing Florida homes are presented.
Publication Date
·
Author(s)
Rudd Armin,
Bergey Daniel
·
Organization(s)
Building Science Corporation,
BSC,
U.S. Department of Energy,
DOE
Description
This report describes how twenty homes were tested and monitored in the Zone 2 climate of Houston, Texas, U.S.A., to evaluate the humidity control performance and operating cost of six different integrated dehumidification and ventilation systems that could be applied by production homebuilders.