Library

Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

Document containing recommendations on how to brace roofs and gable end walls based on lessons learned from analyzing the destruction from hurricane Andrew.

Website providing CAD files and drawings of advanced framing details.

Website providing information about building plans for the ENERGY STAR thermal bypass checklist.

Document outlining building science principles about air flow, heat flow and moisture flow in homes.

An online learning management resource for the construction community.

Report describing findings from a multifamily test home focusing on the combination of energy measures that are feasible, affordable and suitable for multifamily construction in cold climates.

Report about City of Meriden Housing Authority's (MHA) collaboration with Jonathon Rose Companies to complete a gut renovation of 126 residential units in the Chamberlain Heights retrofit project.

Case study characterizing the framing factors for the exterior walls, ceilings, and floors of 180 wood-framed low-rise residential buildings across the United States.

Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.

Article describing correct ways to attach rigid insulation to the exterior of commercial and residential buildings.

Installation manual for installing metal panel siding.

Research study investigating the energy performance and cost effectiveness of several state-of-the-art retrofit strategies that could be used in residential houses in the Boston and New England area.

An article illustrating common errors found in fiber cement siding installations. Many of these errors and poor flashing examples apply to siding materials beyond fiber cement siding.

Attachment or installation of foundations, floors, roofs, insulation, utilities, and finishes to concrete masonry walls as well as on special tools and fasteners available for use with concrete masonry.

Report covering insulating crawlspaces.

Article describing the process of constructing concrete walls

Article about how mortar droppings during the installation of a brick veneer can clog the weep holes in the wall assembly causing moisture damage. The article also illustrates products that can be installed in the ventilated cavity to mitigate this problem.

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. Walls with...

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 in. thick over the WSP, and a cladding system installed over the foam sheathing in low...

Website providing building science based guidance and training for residential construction.

Article describing research encouraging use of exterior insulation to warm interior sheathing surfaces in walls and roof assemblies to reduce the likelihood of condensation during cold weather

Report focusing on building envelopes that have been enhanced with phase change materials (PCMs), which can simultaneously reduce total cooling loads and shift peak-hour loads.

Job Process sheet for the manufactured housing industry showing how to cut insulation batts to fit wall cavities in a factory production environment.

Article describing strategies for reducing the risk of ice dam formation on roofs in winter.

Guidance document on deep energy retrofits.

Report covering exterior energy retrofits of masonry buildings.

Conference paper describing the use of engineered rainscreen products to provide air flow and water drainage space in wall assemblies in residential and commercial buildings.

Article from The Home Energy Community of Practice on designing energy efficient homes in hot climate zones, including home orientation, window location, and roof design considerations.

Information about dense pack, cellulose insulation.

Information sheet providing information about investigating the thermal effect of staggering the inner and outer wall studs on double walls in new construction.

Report covering the rainwater performance of building assemblies.

Report on how airtighness changes as houses age.

Guide provides homeowners ways to prepare for an earthquake and protect a home against earthquake damage.

The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.

Report on problems and solutions with EIFS stucco wall cladding systems.

Presentation about results from an insulating concrete form energy efficiency study in Knoxville, TN.

Web page providing an overview of window coverings such as blinds, shades, shutters, films, and storm windows.

Website from the U.S. Department of Energy providing consumers with information on saving energy and using renewable energy technologies.

Information sheet with details on a building enclosure designed for Albuquerque, NM, as an example for building enclosures built for hot-dry and mixed-dry climates.

Information sheet briefly summarizing double stud wall construction including the advantages and disadvantages of this construction strategy.

Information sheet briefly summarizing double stud with spray foam wall construction including the advantages and disadvantages of this construction strategy.

Information sheet that summarizes Insulated Concrete Form (ICF) construction including advantages and disadvantages of this construction strategy.

Information sheet briefly summarizing truss wall construction including the advantages and disadvantages of this construction strategy.

Report exploring feasibility of designing prescriptive retrofit measure packages for typical Chicago region multifamily buildings in order to achieve 25% source energy savings.

Report about the Advanced Envelope Research effort will provide factory homebuilders with urgently-needed, cost effective methods for meeting emerging energy code requirements.

Report about an expert meeting focused on issues surrounding cladding attachment and performance of walls with exterior insulating sheathing.

Expert Meeting about interior insulation retrofit of mass masonry wall assemblies held on July 30, 2011.

Report that demonstrates the durability, constructability, and cost-effectiveness of the extended plate and beam (EP&B) wall system for new construction housing projects in compliance with the International Energy Conservation Code, addressing moisture risk management and high-performance envelope...