Library

Report focusing on building envelopes that have been enhanced with phase change materials (PCMs), which can simultaneously reduce total cooling loads and shift peak-hour loads.

Website providing information about the Cool Roof Rating Council including programs, membership, and resources for the construction industry.

Job Process sheet for the manufactured housing industry showing how to cut insulation batts to fit wall cavities in a factory production environment.

Article describing strategies for reducing the risk of ice dam formation on roofs in winter.

Guidance document on deep energy retrofits.

Article from The Home Energy Community of Practice on designing energy efficient homes in hot climate zones, including home orientation, window location, and roof design considerations.

Article from Green Building Advisor on strategies to take when building homes to reduce the need for air conditioning, including insulation, windows, site selection, and roofing.

Simple web-based tool allowing homeowners to calculate the potential savings from installing a cool roof.

Information about dense pack, cellulose insulation.

Webpage providing details of an experimental earth tube installation at the Clean Energy Exhibition in Georgia.

Article describing earthship homes.

Article describing quality of life and economic benefit from trees.

The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.

Technical report evaluating the effects of heat pump water heaters on heating and cooling energy usage in laboratory homes.

Webpage from U.S. Department of Energy describing using Earth-Sheltered home building techniques in hot climate zones.

Report on problems and solutions with EIFS stucco wall cladding systems.

Study testing the effect of fan cooling on healthy adults at increased ambient temperatures.

Webpage describing embodied carbon through definition, significance to climate, and importance to policymaking.

Website that lists references that can help you determine how to control you indoor air quality while combating an emergency.

Powerpoint on attic ventilation developed as training material for the Weatherization Assistance Program.

Web page providing an overview of window coverings such as blinds, shades, shutters, films, and storm windows.

Article from NAHB research center describing home building techniques for homes in hot climate zones.

Website from the U.S. Department of Energy providing consumers with information on saving energy and using renewable energy technologies.

Paper describing the effects of tree shade on residential electricity consumption and energy savings in summer and winter.

Technical report evaluating the energy savings potential of radiative cooling technologies, particularly photonic 'selective emittance' materials.

Brochure providing information on the design of the EPA Region 8 headquarters in Denver, CO.

Information sheet with details on a building enclosure designed for Albuquerque, NM, as an example for building enclosures built for hot-dry and mixed-dry climates.

Information sheet that summarizes Insulated Concrete Form (ICF) construction including advantages and disadvantages of this construction strategy.

Technical report presenting the results of an evaluation of homes using high-efficiency mini-split heat pumps to supplement the primary heating and cooling systems.

Webpage providing tips for installing and maintaining an evaporative cooler.

A webpage by the DOE on tips for saving energy with an evaporative cooler.

Image of design wet bulb temperatures in the U.S. and where evaporative cooling is most appropriate.

Guidebook meant to provide public officials with information on excessive heat event.

Report that demonstrates the durability, constructability, and cost-effectiveness of the extended plate and beam (EP&B) wall system for new construction housing projects in compliance with the International Energy Conservation Code, addressing moisture risk management and high-performance envelope...

Fact sheet describing the Extended Plate Wall (EPW) a system that incorporates a 2-inch layer of foam plastic insulative sheathing within the framing for top and bottom plates, streamlining air sealing, window and door installation, weather resistive barrier application, and cladding attachment for...

Webpage from Ready.gov explaining what qualifies as 'extreme heat', how to be safe during an extreme heat event, and how to prepare for extreme heat in homes

Article from Building Science Corporation on construction techniques for extreme heat conditions in Dubai and Las Vegas.

Technical report describing the impact of orientation on thermal comfort.

Summary document describing flood resistant building materials and some tips for building flood resistant walls.

Report on the field evaluation of whole-building approaches and estimation of the relative contributions of select technologies toward reducing energy use related to space conditioning in new manufactured homes.

Article describing five fundamental changes to building construction from the last 50 years and their modern construction consequences.

Research report assessing the moisture and cooling load impacts of airtightness and mechanical ventilation in homes in hot-humid climates.

Study reporting the results of comparative testing of the effect of various roof types on cooling energy performance in a test facility.

Journal article describing energy impacts from shade trees and forests and solar heating and air infiltration.

Report analyzing the effect of global climate change on national interests, and providing climate predictions.

Document describing amendments to IECC 2015 to create the Georgia State Minimum Standard Energy Code.

Article describing the fundamentals and basics of glazing hazard mitigation practices for both new and existing buildings.

Report focuseing on dynamic window and opaque envelope technologies for GEBs, including electrochromic glazing, automated attachments, and thermal storage.

Document that gives a step-by-step approach for designing attachments for cladding materials through foam sheathing.

Article describing tree preservation during the construction process.