Library

2015 edition of code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to three stories.

Guide providing engineering seismic design and building practices based on post-earthquake research.

2018 edition of code establishing a baseline for existing building retrofits to reach appropriate safety levels under new construction requirements covered in other ICC codes.

A colored map showing seismic zones across the United States, ranging from lowest to highest seismic hazards.

Document presenting the minimum recommended requirements necessary for the design and construction of new buildings and other structures to resist earthquake ground motions throughout the United States.

Document containing a series of resource papers that describe earthquake design components, including shear walls, resiliency, ground motion, and story drift and deflection, among others.

A brochure educating homeowners on how to protect their home during seismic events.

Report examining the structural properties and applications of an innovative studless building system, detailing its testing regime and providing an engineering guide for architects and engineers.

Report examining the effectiveness of an aerosolized acrylic technique for air sealing existing homes to reduce air leakage and improve energy efficiency.

Technical report describing the research behind a new aerosol-based sealing method, utilizing pressurization and a dispersed sealant fog, facilitated by a standard blower door, to automatically measure, locate, and seal air leaks in new homes in the United States, providing an efficient solution to...

Fact sheet describing an innovative aerosol-based sealing technique for tightening building envelopes in new homes, involving pressurizing the structure and dispersing an aerosol sealant "fog" to autonomously identify and seal leaks, with real-time feedback through a standard blower door and laptop...

Report describing the experience gained from AIA’s Disaster Assistance Program with first-hand accounts of disaster response and recovery, case studies and other best practices, including approaches to designing buildings to be more adaptable to uncertainty.

Report providing information regarding the benefits and challenges associated with the installation of earthquake-actuated automatic shut-off valves (ASVs) or remote-control valves (RCVs) to stop the flow of natural gas into buildings in the event of an earthquake or rupture of the gas line.

Safety brochure from the Consumer Product Safety Commission (CPSC) describing the dangers to children of furniture tipping over if it is not securely anchored.

Website providing consumers with information about the risk to children from appliances and furniture tipping over and ways to anchor furniture and appliances to prevent this hazard.

This ANSI/RESNET/ICC standard provides a consistent, uniform methodology for evaluating the airtightness of building, dwelling unit, and sleeping unit enclosures and heating and cooling air distribution systems, and the air flows of mechanical ventilation systems.

Web-based mapping tool offering a fast, reliable way to look up key design parameters specified in Standard ASCE 7-10, 7-16, or 7-22 for a specific address or location which is free to use and can look up data for eight different environmental hazard types: wind, tornado, seismic, ice, rain, flood...

Technical report describing the thermal performance of 40 common building envelope details for mid- and high-rise buildings, including analyses to optimize energy efficiency and reduce thermal bridging.

A basic guide walking through the various types of valves useful in mitigating the effects of earthquakes and other seismic events on natural gas pipelines for residential use.

Article from California Earthquake Authority on the benefits of retrofitting homes to withstand earthquake forces, with a focus on foundations, walls, and chimneys.

This report will review, and summarize the current state of understanding and research into enclosures with higher thermal resistance, so-called “High-R Enclosures.” Recommendations are provided for further research.

Guide describing methodologies for assessing and mitigating thermal bridging in building envelopes, featuring detailed performance data, interface solutions, and assembly-specific strategies for energy-efficient construction.

Website providing CAD files and drawings of advanced framing details.

Document outlining building science principles about air flow, heat flow and moisture flow in homes.

California State Code of Regulations, Title 16, Division 8, Article 3, listing requirements for plumbing contractors.

Catalog describing FEMA earthquake-resistant construction resources.

Website providing disaster preparedness information and resources for residents and building owners in locations susceptible to earthquakes.

News article from SFGate explaining and giving figures on how chimney failure is the most common type of damage to homes during an earthquake.

Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.

Research study investigating the energy performance and cost effectiveness of several state-of-the-art retrofit strategies that could be used in residential houses in the Boston and New England area.

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. Walls with...

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height.

Website providing building science based guidance and training for residential construction.

Article describing research encouraging use of exterior insulation to warm interior sheathing surfaces in walls and roof assemblies to reduce the likelihood of condensation during cold weather

Report focusing on building envelopes that have been enhanced with phase change materials (PCMs), which can simultaneously reduce total cooling loads and shift peak-hour loads.

Job Process sheet for the manufactured housing industry showing how to cut insulation batts to fit wall cavities in a factory production environment.

Article describing strategies for reducing the risk of ice dam formation on roofs in winter.

Guidance document on deep energy retrofits.

FEMA risk management series guide on hospital safety and resilience to natural disasters.

Report explaining the principles of seismic design to architects.

Report identifying codes and standards that embody the concepts of resiliency.

Information about dense pack, cellulose insulation.

A quick guide from the California Division of the State Architect (DSA) explaining the three types of gas shutoff devices to stop the flow of natural gas into buildings in the event of an earthquake or rupture of the gas line.

Designer checklist covering hazards involving ground and surface water, rain and water vapor, HVAC and plumbing, sunlight, insects, decay, and natural hazards, and builder checklist covering all disaster resistance, sorted by building component.

Factsheet describing how to secure refrigerators and other major appliances to wall studs using earthquake appliance straps or angle brackets and bolts.

Factsheet describing how to secure televisions, microwaves, computers, and other electronics to prevent damage during earthquakes.

Factsheet describing how to secure water heaters to resist seismic activity.

FEMA guide containing recommendations on how to implement cost-effective measures that can help to reduce the potential hazards associated with earthquakes.

Poster describing earthquake safety tips and protection measures to take at home.

A book describing how to complete an earthquake retrofit plan for wood-frame residential buildings.