Library

Article describing the fundamentals and basics of glazing hazard mitigation practices for both new and existing buildings.

Research report presenting results of short term tests on measures used in an energy efficiency retrofit project in California.

Report focuseing on dynamic window and opaque envelope technologies for GEBs, including electrochromic glazing, automated attachments, and thermal storage.

Document that gives a step-by-step approach for designing attachments for cladding materials through foam sheathing.

Report sumarizing results of an ICF investigation of side-by-side houses in Knoxville, Tennessee.

Article summarizing for potential homeowners items to check or demand from the builder in designing a home for a cold climate.

Factsheet describing the importance of building enclosures and their impact on energy efficiency.

Article outlining the casuses and solutions for ice dam problems.

Research study describing field testing performed in 32 two-story Florida homes to characterize wind washing failures of the house air and thermal boundary.

Guide describing sound mitigation measures to lower building natural disaster vulnerability to assist local officials and community decision makers in coastal areas.

Report using a field test plan to evaluate the success of implementing energy efficiency upgrades at the community scale incorporating whole-house systems integrated measures package (SIMP).

Technical report assessing the market for Low-e storm windows based on market data, case studies, and recent experience with weatherization deployment programs.

Guidebook providing useful examples of high performance retrofit techniques for the building enclosure of wood frame residential construction in a cold and somewhat wet climate.

Siding installation guide for Ply Gem Siding Group products.

Report summarizing a case study about the performance of three occupied homes built in 2009 in San Antonio, Texas.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Conference paper making the case that moving ducts to conditioned space saves energy, is practical for production builders (when accompanied by careful pre-planning), and creates significant andmarketable energy savings for homebuyers.

A website issuing watches, warnings, forecasts, and analyses of hazardous tropical weather and increasing the understanding of hazards.

The Saffir-Simpson Hurricane Wind Scale is a 1 to 5 rating based on a hurricane's sustained wind speed.

The Enhanced F-scale is a set of wind estimates (not measurements) based on damage which uses three-second gusts estimated at the point of damage based on a judgment of 8 levels of damage to the 28 indicators listed.

Report presenting the results of a study evaluating retrofit solutions for addressing the effects of wind washing on homes.

Report presenting performance results from tests conducted on an energy efficiency retrofit project in Stockton, California.

Paper examining the monitored performance of four newly constructed near zero energy homes in Florida.

Manual describing design, detailing, material selection and troubleshooting for plaster, IEFs, and drywall, with information on continuous insulation, air barriers, rain screens, and ratings for fire and sound.

A report presenting alternative approaches for reducing the costs of roof-mounted, grid-connected photovoltaic (PV) systems.

Report proposes high performance duct measures for inclusion in California Title 24 building energy efficiency standards for 2016.

Report describing extensive renovations to a historic home.

Reports describing a mathematical methodology for assessing the seismic performance of buildings.

Article outlining the key issues related to the protection of the building envelope against seismic forces.

High-density sidewall cavity insulation can be a major comfort and savings boost. It saves energy by slowing both conductive and convective losses, but only if the right things are done and done right. This always requires site-specific thinking.

Study conducted to help determine cost-effective solutions for heating and cooling houses that are designed to be energy efficient.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

California Energy Commission report presenting the concept of cool walls and providing guidelines for their building- and climate-appropriate use to conserve energy and reduce emissions.

Job Process sheet for the manufactured housing industry showing how to split and notch insulation batts to fit around electrical boxes and wiring in a factory production environment.

Standard describing a test method measuring air-leakage rates through a building envelope under controlled pressurization and de-pressurization which was published in the year 2019 and is available for preview and purchase at the reference link.

Standard describing two techniques for measuring air leakage rates through a building envelope in buildings that may be configured to a single zone which was published in the year 2022 and is available for preview and purchase at the reference link.

A website providing timely and accurate forecasts and watches for severe thunderstorms and tornadoes over the contiguous United States.

Information sheet describing correct application of stucco.

Report describing use of the Energy in Modular (EMOD) method to design, produce, and deliver affordable, net-zero energy, low-carbon, and healthier buildings through industrialized (factory) construction of modular buildings; modeling of whole buildings and subassemblies of components, pods, panels...

Document providing an overview of the Thermal Bypass Checklist for the ENERGY STAR Qualified Homes program.

Guide describing details that serve as a visual reference for each of the line items in the Thermal Enclosure System Rater Checklist.

Report proposing a procedure for estimating the whole opaque wall R-value (whole-wall R-value), independent of system type and construction materials.

Technical report describing the impact of thermal bridging in balcony connections, presenting alternative design strategies, performance analyses, and case studies to enhance energy efficiency and reduce carbon emissions in building envelopes.

BSD-102 report providing guidance about whether to construct a vented or unvented attic based on hygro-thermal zone.

Report focusing on the performance and durability of unvented-cathedralized attics in hot-humid climates with both tile and asphalt shingle roofing.

Information sheet with the Waste Reduction Model (WARM), designed to help solid waste planners and organizations track and voluntarily report greenhouse gas (GHG) emissions reductions from several different waste management practices.

Introductory guide to air sealing the envelope of a home to reduce wasted energy and save on energy costs.