Library

Report exploring four questions to determine the level of risk associated with adding drained exterior insulation to the exterior of an existing home during an energy retrofit.

ICC-ES Evaluation Report reviewing proprietary steel shear wall panels developed by Simpson Strong-Tie Company to resist vertical and lateral loads in walls resulting from wind or earthquakes.

An impact test report from projectile missile tests against brick veneer, verifying that brick veneers perform well to resisting hurricane force wind driven debris.

Guide detailing best practices on how to build wall assemblies with absorptive claddings such as brick, stone that drain and dry well.

Site showing flame spread ratings and definitions for common building materials.

Article explaining installing cavity insulation.

A guide for users and energy raters of insulated siding as home insulation.

Article describing how insulated siding can save homeowners energy by providing continuous exterior insulation.

Report about promoting energy efficiency for Hilton Head Island.

Report covering reservoir claddings, back ventilation and vapor throttles.

Report describing ways to retrofit a home to make it more hurricane resistant.

The purpose for this document is to provide basic guidance on the use of proven installation techniques that can be used by installers to help ensure correct “dense pack” application of JM Spider® in drill & fill applications.

Article describing walls and moisture development on them.

Article providing guidance for installing manufactured stone veneer, including information on rainscreens.

Website providing information about Knauf Insulation.

Website describing best practices for minimizing exposure to lead while doing repairs and renovations in homes built in 1978 or earlier.

A website explaining the measurement of light bulbs, measurable in lumens, & brightness levels that ENERGY STAR products produce.

A website explaining the basics of LED lightning, their lifespan, their use in general lighting applications, the amount of heat produced, and why you should choose ENERGY STAR certified LED products for your home.

A fact sheet providing information on ENERGY STAR certified LED bulbs & how to find the right one to fit your lighting fixture.

ENERGY STAR lightbulb criteria.

A website explaining why homeowners should install ENERGY STAR certified lightbulbs, which helps to save homeowners on utility bills and protect the environment.

A website exploring the use of lighting controls products like dimmers, motion sensors and timers to save energy in the home.

A website explaining basic lighting principles and terms & how they are applied to the home.

Test results used by multiple structural insulated panel manufacturers confirming a one-hour fire rating for specific SIP assemblies.

Report on the impact of air sealing between the foundation and the living space on radon transport reduction across the foundation and living space floor assembly at fifteen home.

A website explaining lumens & how to compare the amount of light that lightbulbs can produce when shopping for replacements.

Web article describing many ways homeowners, contractors, and builders can make homes more resistant to hurricanes, tornadoes, high winds, floods, and hail.

Webpage featuring hundreds of illustrations of masonry construction details for brick, congrete, stone, tile, stucco, etc.

Siding installation guide for Ply Gem Siding Group products.

Report on two approaches to retrofitting existing double-stud walls.

Report describing a deep energy enclosure retrofit solution for insulating mass masonry buildings from the interior.

Measure Guideline research report providing simple, long term, and durable solutions when using tapes and flashing membranes in conjunction with the exterior face of rigid polymeric foam sheathing to create the drainage plane of a wall system.

Report describing wall assemblies that use layers of rigid exterior insulation thicker than 1-½ inch and require a secondary cladding attachment location exterior to the insulation.

Information sheet providing information on installing Rigid XPS foam board insulation to existing brick masonry walls.

Report summarizing the importance of properly insulating and air sealing masonry walls, providing step by step instructions and approaches.

Report describing the use of mineral fiber insulating sheathing in a high performance enclosure retrofit package.

Document providing renovators and retrofit contractors an overview of considerations when including wall air sealing and insulation in an energy retrofit project.

Report covering the fundamental waterproofing strategies for tub and shower assemblies.

Study investigating measured cooling energy savings from the installation of wall finishes with higher solar reflectance.

Report describing a lighting and smart power strip retrofit evaluation that was conducted on 56 all-electric, existing Florida homes to see how lighting and miscellaneous electric loads might be reduced.

Factsheet describing smart practices for minimizing damage to residential electrical service components during coastal and riverine flood events.

FEMA mitigation assessment team report following Hurricane Charley in Florida including observations, recommendations, and technical guidance for retrofitting hurricane-damaged homes.

FEMA mitigation assessment team report following Hurricane Ivan in Florida and Alabama including observations, recommendations, and technical guidance.

FEMA Mitigation Assessment Team Report describing damages from Hurricane Michael in Florida in Oct. 2018 and recommendations for future hurricane preparedness.

Report describing the work conducted for high performance hybrid assemblies.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Report explaining moisture-related concerns for high R-value wall assemblies and discusses past Building America research work that informs this study.

The next generation of building enclosures is a key step toward achieving high-performance goals through decreasing energy load demand and enabling advanced space-conditioning systems. Yet the adoption of high-R enclosures and particularly high-R walls has been a slow-growing trend because...

Report describing evaluation of several configurations of wall assemblies to determine the accuracy of moisture modeling and make recommendations to ensure durable, efficient assemblies.