Library

Code describing energy codes for energy-conserving and compliant designs in Florida.

Fact sheet providing an overview of FEMA P-348, Protecting Building Utility Systems From Flood Damage.

2018 edition of code establishing a baseline for existing building retrofits to reach appropriate safety levels under new construction requirements covered in other ICC codes.

Website article comparing DC and AC batteries and explaining that DC batteries have black start ability to restart from solar power while providing AC batteries need grid power to restart if fully discharged.

Website article describing pros and cons of DC and AC batteries and explaining that AC batteries are less expensive than DC batteries.

Website article describing the advantages and disadvantages of AC and DC battery energy storage systems and inverters for solar power systems.

Report examining the structural properties and applications of an innovative studless building system, detailing its testing regime and providing an engineering guide for architects and engineers.

Report investigating implemention of advanced power strips for entertainment and home office electronics would reduce energy consumption across the residential market.

Report examining the effectiveness of an aerosolized acrylic technique for air sealing existing homes to reduce air leakage and improve energy efficiency.

Technical report describing the research behind a new aerosol-based sealing method, utilizing pressurization and a dispersed sealant fog, facilitated by a standard blower door, to automatically measure, locate, and seal air leaks in new homes in the United States, providing an efficient solution to...

Fact sheet describing an innovative aerosol-based sealing technique for tightening building envelopes in new homes, involving pressurizing the structure and dispersing an aerosol sealant "fog" to autonomously identify and seal leaks, with real-time feedback through a standard blower door and laptop...

Report with updated energy consumption data for 28 residential & commercial miscellaneous electric loads (MELs), including projections to 2040.

This ANSI/RESNET/ICC standard provides a consistent, uniform methodology for evaluating the airtightness of building, dwelling unit, and sleeping unit enclosures and heating and cooling air distribution systems, and the air flows of mechanical ventilation systems.

Technical report describing the thermal performance of 40 common building envelope details for mid- and high-rise buildings, including analyses to optimize energy efficiency and reduce thermal bridging.

Report describing the business case of hosting a Level 2 electric vehicle (EV) charging station in New York, including analysis of real-world data on equipment use, costs, revenue, and assumptions derived from industry reports and original research.

Website providing comparison charts and reviews of battery energy storage systems for solar power systems.

YouTube channel featuring 90+ videos to educate Bay Area homeowners and contractors about seismic retrofitting, including information for various home and construction types.

Article describing bidirectinoal charging and energy storage methods using electric vehicles.

The Builder's Guide provides the building industry with the latest and best practical information on how to apply building science principles to structures as systems in hot-humid climate regions.

This report will review, and summarize the current state of understanding and research into enclosures with higher thermal resistance, so-called “High-R Enclosures.” Recommendations are provided for further research.

Guide describing methodologies for assessing and mitigating thermal bridging in building envelopes, featuring detailed performance data, interface solutions, and assembly-specific strategies for energy-efficient construction.

Website providing CAD files and drawings of advanced framing details.

Document outlining building science principles about air flow, heat flow and moisture flow in homes.

A website describing a list of common vocabulary used when describing light bulbs.

A simple three-step guide for homeowners who are looking to replace existing light bulbs with more energy-efficient, higher-performing bulbs.

Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.

Research study investigating the energy performance and cost effectiveness of several state-of-the-art retrofit strategies that could be used in residential houses in the Boston and New England area.

A website explaining the various shades of light, from warm to cool colors, with a visual diagram illustrating the various shades of light.

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height. Walls with...

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height.

Website providing building science based guidance and training for residential construction.

Article describing research encouraging use of exterior insulation to warm interior sheathing surfaces in walls and roof assemblies to reduce the likelihood of condensation during cold weather

Report focusing on building envelopes that have been enhanced with phase change materials (PCMs), which can simultaneously reduce total cooling loads and shift peak-hour loads.

Report describing costs associated with non-residential electric vehicle charging, including multifamily properties.

Job Process sheet for the manufactured housing industry showing how to cut insulation batts to fit wall cavities in a factory production environment.

Article describing strategies for reducing the risk of ice dam formation on roofs in winter.

Guidance document on deep energy retrofits.

Guide describing design recommendations to ensure that electric vehicle charging stations comply with the Americans with Disabilities Act

Website discusses differences between CFL and LED bulbs.

A research paper exploring the installation and mounting of solar photovoltaic (PV) panels on rooftops and the challenges faced by system designers and installers.

A PDF containing the SERC Solar PV System Field-Inspection Checklist.

Information about dense pack, cellulose insulation.

The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.

Report on problems and solutions with EIFS stucco wall cladding systems.

Article describing electric vehicle charging, including charger types and infrastructure development.

Web page providing an overview of window coverings such as blinds, shades, shutters, films, and storm windows.

A FAQ explaining the purpose of the Energy Independence and Security Act, a law which sets energy efficiency standards for lightbulbs.

Website from the U.S. Department of Energy providing consumers with information on saving energy and using renewable energy technologies.

A list of clothes dryers that made the EnergyStar Most Efficient list for 2021, delivering cutting technological innovation along with energy efficiency.

List describing vetted products and equipment for the deployment of electric vehicle charging and hardware systems, evaluated against criteria developed by industry consensus, utility input, and review of government agency requirements for the electric vehicle supply equipment industry.