Library

A supplement to the 2012 Florida Building Code on energy efficiency and conservation.

Code describing energy codes for energy-conserving and compliant designs in Florida.

Web page describing essential guidelines and recommendations for optimal installation of ductless heat pumps in cold climates, ensuring maximum heating performance and long-term satisfaction for homeowners, supported by research-backed insights and detailed resources.

Article describing methods for thermally isolating a garage in a Passive House-certified multifamily building.

Vinyl siding estimating and installation guide for vinyl siding products.

Radiant, hydronics, geothermal -- they are a vital part of modern comfort and energy solutions. ACCA helps hydronics contractors operate at peak performance.

Standard outlining industry procedure for sizing residential duct systems.

Standard providing guidance on how to select, size, and locate the supply air diffusers, grilles and registers, and the return grilles.

Technical manual from ACCA outlining correct methods for zoning of residential HVAC systems.

Fact sheet describing best strategies to bring ductwork on single-story homes with a slab-on-grade foundation in hot, dry climates into the conditioned envelope of the home intending to highlight the pros and cons of multiple ductwork integration strategies, including traditional duct systems in...

Standard for use and reference by designers, architects, engineers, contractors, installers and users for evaluating, selecting, specifying and properly installing flexible duct in heating and air conditioning systems.

Guide describing advanced framing, a system of construction framing techniques designed to optimize material usage and increase energy efficiency.

Fact sheet describing air-sealing concerns and remedies, including HRV/ERV installation, caulking, spray foam, and weatherstrip installation.

Standard covering updates to the expected leakage rates for ductwork constructed to the SMACNA HVAC Duct Construction Standards—Metal & Flexible, duct leakage test procedures; includes recommendations on use of leakage testing, types of test apparatus, and test setup and sample leakage analysis.

Standard establishing test methods for determining air leakage in duct systems using fan pressurization in low-rise residential and commercial buildings.

Article Describing methods for thermally isolating multifamily parking garages.

The Builder's Guide provides the building industry with the latest and best practical information on how to apply building science principles to structures as systems in hot-humid climate regions.

Website providing CAD files and drawings of advanced framing details.

Document outlining building science principles about air flow, heat flow and moisture flow in homes.

Training manual on how to locate ducts within conditioned space and compact design.

An article discussing how different metal roof materials and attachment methods affect the ability of the roof to thermally expand and contract and the durability of different solutions.

Manual showing duct cleaning contractors how to identify the different types of insulated air ducts, how to open each type for access by cleaning equipment and personnel, how to close and seal openings after cleaning.

Website providing building science based guidance and training for residential construction.

Article describing research encouraging use of exterior insulation to warm interior sheathing surfaces in walls and roof assemblies to reduce the likelihood of condensation during cold weather

This study focuses on the design, construction, and performance of the interior chase approach as implemented by five different builders in Texas, North Carolina, and Florida.

Information about dense pack, cellulose insulation.

Information sheet with HVAC duct insulation, testing, maintenance and performance information.

The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.

Report on problems and solutions with EIFS stucco wall cladding systems.

Discussion of structural thermal resistance.

Website from the U.S. Department of Energy providing consumers with information on saving energy and using renewable energy technologies.

Information sheet with details on a building enclosure designed for Albuquerque, NM, as an example for building enclosures built for hot-dry and mixed-dry climates.

Information sheet that summarizes Insulated Concrete Form (ICF) construction including advantages and disadvantages of this construction strategy.

Information sheet providing detail about hand fabrication of a one-piece straight duct from a 48" x 120" x 1" thick (1.22 m x 3.05 m x 25 mm) sheet where the total inside duct dimensions equals 112" (2.84 m) or less.

Standard providing a comprehensive approach to evaluating, selecting, specifying and installing flexible duct in HVAC systems.

Document that gives a step-by-step approach for designing attachments for cladding materials through foam sheathing.

Presentation about proper installation of flexible ducts.

Standards criteria supporting ICC HVAC duct support standards.

Report showing installers how to attach ducts, pipes, and associated equipment to buildings to minimize earthquake damage.

Report describing as-found interior platform return plenums, the magnitude of their contribution to the total amount of duct leakage, and techniques and results of retrofits executed by the HVAC trade during equipment replacement.

Technical report assessing the market for Low-e storm windows based on market data, case studies, and recent experience with weatherization deployment programs.

Factsheet describing how to test the duct leakage of a manufactured home in the manufactured home factory.

Guidebook providing useful examples of high performance retrofit techniques for the building enclosure of wood frame residential construction in a cold and somewhat wet climate.

Siding installation guide for Ply Gem Siding Group products.

Standard that prescribes a testing method to determine the efficiency of space heating and/or cooling thermal distribution systems under seasonal and design conditions. This version of the standard was published in the year 2014, and is available for preview and purchase at the reference link. The...

FEMA report describing findings from an investigation of Hurricane Ike in Texas and Louisiana and residential construction recommendations based on those findings.

Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow. Results indicate that utilizing air-permeable fibrous fill insulations in unvented...

Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow; results indicate that utilizing air-permeable fibrous fill insulations in unvented...

Conference paper making the case that moving ducts to conditioned space saves energy, is practical for production builders (when accompanied by careful pre-planning), and creates significant andmarketable energy savings for homebuyers.

This report is designed to meet ASHRAE 62.2-2010/2013 and ANSI/ACCA’s 5 QI-2015 protocol, thereby improving the performance of HVAC equipment in new homes when compared to homes built to minimum code.