Library

Website with consumer information about duct cleaning.

Manual that identifies certain leakage limits for ducts and outlines procedures for testing ducts for conformity with air leakage limits that are set forth in a designer’s project specification.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

Technical report providing site selection guidance for installation of small wind turbines.

Document providing incident solar radiation data and window overhang sizing guidance for multiple locations across the U.S.

Spreadsheet tool that computes solar reflectance index (SRI) and roof surface temperature based on solar reflectance and thermal emittance using ASTM standard E 1980.

This Standard provides a consistent, uniform methodology for evaluating the airtightness of building envelopes and heating and cooling air ducts and the air flows of mechanical ventilation systems.

Report addressing barriers to information, contractor resources and cost savings associated with steam balancing multifamily buildings.

Information sheet about buried ducts.

Paper describing landscaping influences on heat gain through shading, infiltration shielding, and microclimate creation for nearby buildings.

Report about the impact on the loads when common safety factors are applied to the load calculation process using two houses that meet the 2009 IECC prescriptive path modeled as the accurate baseline.

Document covering the pros and cons of compact air distribution systems and the decision criteria that must be considered early in the whole-house design process.

Report about proper water heater selection developed to provide step-by-step procedures for evaluating preferred cost-effective options for energy efficient water heater alternatives based on local utility rates, climate, and anticipated loads.

Report describing findings from research related to heating, ventilation, and air conditioning (HVAC) companies that have made the decision to transition to whole house performance contracting (WHPC).

Paper describing case studies on urban vegetation and greenways and their impacts on city climate and building performance.

Presentation on sustainable development including water conservation, passive solar, daylighting, natural ventilation, and land use.

Presentation by the Washington University in St. Louis Office of Sustainability on saving energy.

Presentation on urban land use and sustainable building design.

Study on the effects of wind, radiation, and pressure on apparent temperature.

Presentation describing how to make a Corsi-Rosenthal Box for air cleaning.

Study comparing the thermal performance of phase change materials to concrete construction during heat waves.

Document describing the impacts of tree cover on property values.

Article from Green Building Advisor on the importance of window selection in hot climates, with an emphasis on window glazing.

Standard providing industry-backed information for assessing new and existing HVAC systems, evaluating and verifying the cleanliness of HVAC system components, preventing job related hazards and guiding the cleaning and restoration of HVAC systems to a specific level of cleanliness.

Webpage providing guidance on the use of thermal mass with passive heating and cooling strategies.

Technical research paper explaining how thermal mass influences heating and cooling energy needs.

Design guide providing technical information regarding building with thermal mass.

Article detailing a case study in which thermal mass was used as part of an overall Net Zero solution for a university building.

Conference paper describing a proof of concept trial that demonstrated that external roller blinds can reduce heating loads in a room by 20%.

Article from Purdue University on the potential for white paint technology to lower air conditioning usage requirements.

Webpage from the City of Fresno's Water Conservation Program describing household water conservation recommendations, including tips for maintaining evaporative coolers.

Blog article summarizing the effects of extreme heat on air quality and lung health.

Information sheet describing transfer ducts and grilles for HVAC.

Training course describing how to incorporate trees into an energy-conserving landscape.

Manual describing scientific, technical, and practical information needed to work with communities on urban forestry, including a section on trees and construction.

Interactive map maintained by the USDA showing plant hardiness zones throughout the U.S.

Webpage describing the use of cool roofs to reduce heat islands and and benefits and costs.

Research study comparing TRNSYS Type 604 pipe model against laboratory pipe heat loss test data and detailed field monitoring data.

Information sheet about proper ventilation and air sealing.

Guide providing information on controlling attic ductwork sweating.

Fact sheet describing how to identify heat-related illness and what actions to take.

Web page explaining what a cool exterior wall is and how they work, as well as benefits to their use and links to research studies.

Web page explaining what a cool roof is and how they work, as well as benefits to their use and links to research studies.

Conference paper presented at the 2020 Summer Study on Energy Efficiency in Buildings presenting the results of an evaluation of control strategies used when new mini-splits are installed in a home with an existing HVAC system.

Technical fact sheet describing proper operation, sizing, and installation of whole-house fans.

Paper describing wind influences on air infiltration related energy losses for residential housing and the shielding effects of fences, adjacent structures, and vegetation.

Report describing the design and construction of a highly energy efficient community of ten duplexes in Greenfield, Massachusetts.

Report and case study describing a retrofit project for single family homes in the Pacific Northwest.

Report detailing passive design strategies used at the Zion National Park Visitor Center, including evaporative cool towers.