Library

Technical report providing site selection guidance for installation of small wind turbines.

Standard document establishing construction standards for one- and two-family dwellings constructed in high wind regions.

This Standard provides a consistent, uniform methodology for evaluating the airtightness of building envelopes and heating and cooling air ducts and the air flows of mechanical ventilation systems.

Report addressing barriers to information, contractor resources and cost savings associated with steam balancing multifamily buildings.

Information sheet about buried ducts.

A website providing timely and accurate forecasts and watches for severe thunderstorms and tornadoes over the contiguous United States.

Report recommending strategies and approaches that the Federal government and other stakeholders may take to encourage and aid States and local communities in the adoption of the most current building codes.

Report about the impact on the loads when common safety factors are applied to the load calculation process using two houses that meet the 2009 IECC prescriptive path modeled as the accurate baseline.

Document covering the pros and cons of compact air distribution systems and the decision criteria that must be considered early in the whole-house design process.

Report about proper water heater selection developed to provide step-by-step procedures for evaluating preferred cost-effective options for energy efficient water heater alternatives based on local utility rates, climate, and anticipated loads.

Report describing findings from research related to heating, ventilation, and air conditioning (HVAC) companies that have made the decision to transition to whole house performance contracting (WHPC).

Article describing three ways to strengthen the roof-to-wall connections in an existing home.

Article defining structural design loads and ways to calculate them, including dead loads, live loads, soil lateral loads, wind loads, snow loads, earthquake loads, and other loads.

Recovery advisory presenting key wind retrofit guidelines for buildings located in hurricane-prone regions. These retrofit guidelines are intended to help building owners and designers prevent or limit wind damage and water infiltration during high-wind events.

Article describing suggested food supplies, sanitation, safety, and cooking for during and after an emergency.

Presentation by the Washington University in St. Louis Office of Sustainability on saving energy.

A guide for homeowners on determining the risks from tornadoes and hurricanes and selecting a safe room type and location, as well as providing detailed plans for safe room construction.

Report presenting safe room designs and showing the homeowner and builder/contractor or local design professional how to construct a safe room for a home or small business.

Fact sheet providing the wind resistant provisions of the 2015 International Residential Code.

Projectile missile testing of various wall panel configuration to understand how the different wall constructions would perform when struck with wind driven debris from a hurricane.

Report illustrating CAD drawings and modeling of bracing layouts for a gable roof truss.

Report descrbing an early study pointing to the significant improvement, >50%, of a hip roof in reducing peak wind-induced pressures.

Standard providing industry-backed information for assessing new and existing HVAC systems, evaluating and verifying the cleanliness of HVAC system components, preventing job related hazards and guiding the cleaning and restoration of HVAC systems to a specific level of cleanliness.

Manuals describing design, materials, and installation techniques applicable to almost all types of roof systems; four-volume set includes Metal Panel and SPF Roof Systems, Membrane Roof Systems, Architectural Metal Flashing and Condensation and Air Leakage Control, and Steep-Slope Roof Systems.

A book describing seismic retrofits to help contractors and engineers understand how to properly retrofit a home in a cost-effective manner.

Guide describing details that serve as a visual reference for each of the line items in the Thermal Enclosure System Rater Checklist.

Information sheet describing transfer ducts and grilles for HVAC.

Website providing guidance for people to find and use tools, information, and subject matter expertise to build climate resilience.

Information sheet providing definitions, applications, and techniques for applying air barriers.

Article describing how adhesives can be used to make homes in high-wind locations stronger and how adhesives could be too effective resulting in overloading foundation anchors under earthquake loads.

Research study comparing TRNSYS Type 604 pipe model against laboratory pipe heat loss test data and detailed field monitoring data.

A review on the knowledge about ventilated wall claddings from field performance and hydrothermal modeling.

Information sheet about proper ventilation and air sealing.

Guide providing information on controlling attic ductwork sweating.

Website describing proper methods for installing vinyl siding on homes.

Document describing wall bracing techniques and suggestions for the city of Verona, WI building department.

A guide describing how to do wall bracing calculations and evaluations.

Web page providing statistics on weather related fatalities and injuries.

Manual showing how to properly use grass swales to manage excess water runoff.

Report providing design guidance for wood-framed residential construction in high wind areas where design wind velocity requirements do not exceed 140 miles per hour.

Study showcasing the location of the highest uplift force on the hip, ridge, and perimeter regions of roofs, and thus roofing material needs for the most fasteners and adhesive at these locations.

Study analyzing wind pressures on hip roofs where two hip roofs come together forming an L or T shaped roof or building.

Guide presents mitigation measures in a Mitigation Package which combined set of retrofit measures that must be implemented for a house to provide a defined level of protection; identifies three successive Mitigation Packages: Basic, Intermediate, and Advanced. Implementing the Mitigation Packages...

Article discussing structural and nonstructural building components and illustrates a variety of wind-induced damages, including wind-driven rain infiltration.

Fact sheet describing impact-resistant window systems with specifics on Florida’s building codes.

Website providing consumers with general guidance on preparing for and surviving a winter storm.

Website providing information to prepare for winter storms, prevent cold temperature-related health problems, and protect yourself during all stages of a winter storm.

Report describing the design and construction of a highly energy efficient community of ten duplexes in Greenfield, Massachusetts.

Catalog detailing the metal connector products manufactured by Simpson Strong-Tie and their applications and strengths.

Manual providing engineered and prescriptive design requirements for wood frame construction used in one and two-family dwellings.