Library

Report providing design guidance for wood-framed residential construction in high wind areas where design wind velocity requirements do not exceed 140 miles per hour.

An informational guide established to educate the public on seismic shut-off valves and how to avoid fires following an earthquake.

Web page explaining what a cool exterior wall is and how they work, as well as benefits to their use and links to research studies.

Web page explaining what a cool roof is and how they work, as well as benefits to their use and links to research studies.

Document describing what levees are, how they work, and who owns them.

Infographic explaining what a seismic shut-off valve is and providing frequently asked questions.

An article describing a way to protect drain and ventilation holes in brick veneer siding against pests. Selecting a fine screen mesh opening (1/55-inch or 0.5-mm) is important to guard against small insects such as subterranean termites.

EPA coronavirus Q&A discussing the role of HVAC filters in dealing with COVID-19.

Guidelines from IBHS on modifications to homes to prepare for a wildfire if evacuation orders are anticipated for the area.

Webpage describing how different amounts and types of snow loads affect the structural integrity of roofs and homes.

A heat map showing the average number of tornadoes per year across the United States

Webpage describing the Wildland Urban Interface (WUI) and how to plan residential building to mitigate wildfire risks associated with building in the WUI.

Conference paper presented at the 2020 Summer Study on Energy Efficiency in Buildings presenting the results of an evaluation of control strategies used when new mini-splits are installed in a home with an existing HVAC system.

Technical fact sheet describing proper operation, sizing, and installation of whole-house fans.

Conference paper presented at the 8th International Conference on Thermal Performance of Exterior Envelopes of Whole Buildings describing moisture from basements and crawlspaces as a source of indoor humidity and providing recommendations for finishing below-grade spaces to limit potential indoor...

Webpage from USFA compiling resources from across the U.S. on Wildland Urban Interface (WUI) information.

Webpage from USDA and U.S. Forest Service with a map of potential wildfire risk across the U.S.

A report for homeowners and contractors providing specific recommendations for how to retrofit existing components of a home to withstand wildfire.

Website describing how wildfires spread and how fuels, weather, and topography influence fires.

Webpage that providing designation program enables homeowners to take preventative measures for their home and yard to protect against wildfire.

Webpage describing ways builders and communities an reduce wildfire risk.

A webpage providing guidance on increasing the wildfire resistance of a home.

A website created by the U.S. Forest Service, containing interactive maps, charts and resources to help communities explore their risk to wildfires.

Article describing the impacts of wildfire smoke on indoor air quality and some ways ASHRAE is responding.

Fact sheet providing recent statistics on wildfires in the U.S.

Article describing ways to design and construct a building to resist wildfires.

A list of exterior building products and materials approved for use in wildland urban interface zoned homes. These products are non-combustible or ignition-resistant.

An example of wildland urban interface construction requirements for new buildings built in very high fire risk zones/areas.

Website summarizing wildland codes and standards, including related NFPA codes and standards.

Article describing the growth of the wildland urban interface in the United States from 1990 to 2010, expanding from 30.8 to 43.4 million homes (a 41% increase), and growing from 581,000 to 770,000 kM2 (33% growth), an increase of 189,000 km2, an area that is larger than Washington State.

Paper describing wind influences on air infiltration related energy losses for residential housing and the shielding effects of fences, adjacent structures, and vegetation.

Study showcasing the location of the highest uplift force on the hip, ridge, and perimeter regions of roofs, and thus roofing material needs for the most fasteners and adhesive at these locations.

Study analyzing wind pressures on hip roofs where two hip roofs come together forming an L or T shaped roof or building.

Report providing guidance on how to improve the wind resistance of existing residential buildings in Mississippi and across the Gulf Coast.

Guide describing "wind safe” room as a reinforced area of a home designed to withstand severe windstorms.

Article discussing structural and nonstructural building components and illustrates a variety of wind-induced damages, including wind-driven rain infiltration.

DOE presentation describing a project to study window attachments.

Fact sheet describing impact-resistant window systems with specifics on Florida’s building codes.

Website sharing how to stay safe before, during, and after a winter storm.

Article describing how generators being used for backup power during outages can lead to safety concerns.

Webpage from American Red Cross describing how to stay safe and prepare homes for severe winter weather such as blizzards.

Website providing consumers with general guidance on preparing for and surviving a winter storm.

Webpage describing steps to take to prepare homes for winter weather as well as safety information for after storms have passed.

Website providing information to prepare for winter storms, prevent cold temperature-related health problems, and protect yourself during all stages of a winter storm.

Report describing the design and construction of a highly energy efficient community of ten duplexes in Greenfield, Massachusetts.

Catalog detailing the metal connector products manufactured by Simpson Strong-Tie and their applications and strengths.

Manual providing engineered and prescriptive design requirements for wood frame construction used in one and two-family dwellings.

A hurricane retrofit guide describing techniques for strengthening roof-to-wall connections for family homes.

Report describing results of a workshop assessing current and future strategies for research into disaster resilience and energy efficiency in buildings.

Report and case study describing a retrofit project for single family homes in the Pacific Northwest.