Library

Report about City of Meriden Housing Authority's (MHA) collaboration with Jonathon Rose Companies to complete a gut renovation of 126 residential units in the Chamberlain Heights retrofit project.

This is a guide for establishing smoke-free policies in public housing and multifamily properties.

Manual showing duct cleaning contractors how to identify the different types of insulated air ducts, how to open each type for access by cleaning equipment and personnel, how to close and seal openings after cleaning.

Fact sheet that details the steps needed to perform a combustion appliance safety inspection to determine if fossil fuel-fired appliances are operating safely under a depressurized condition.

Report summarizing one year of monitoring and analysis of the effectiveness of a space conditioning system at maintaining temperature and relative humidity levels in a test home, as well as room-to-room differences and the actual measured energy consumption by the space conditioning system.

Report documenting the results of an in-depth evaluation of thermal comfort for two potential net zero-energy homes (NZEHs) in Massachusetts.

Report on heating and cooling air-distribution ducts that are insulated, installed close to the ceiling in a vented attic and covered with attic insulation to minimize energy loss.

Report telling consumers how radon gets into a home and how to reduce radon entry into a home.

Report on experiments comparing the cooling and heating seasonal and peak demand performance of different variable-capacity air conditioning and heat pump units.

Technical bulletin addressing surfacing options in regards to composite wood panels and their emission barrier capabilities.

Article describing the causes of wood decay and moisture issues.

This study focuses on the design, construction, and performance of the interior chase approach as implemented by five different builders in Texas, North Carolina, and Florida.

Research report describing the development of standardized test methods for PM2.5 and CO2 sensors enabling reliable, low-cost indoor air quality monitoring and improvement.

Information sheet with HVAC duct insulation, testing, maintenance and performance information.

Report identifying two barriers that limit the ability of builders to explore opportunities for higher levels of energy efficiency in housing: the use of duct system materials that inherently achieve airtightness and are right-sized for low-load houses, and, the ability to air seal fire separation...

A report describing six mechanical ventilation strategies that were evaluated for their ability to control indoor humidity levels over 14-day periods with simulated occupancy.

Report describing an investigation into multiple occupancy-based ventilation control strategies and the associated energy savings.

Webpage from U.S. Department of Energy describing using Earth-Sheltered home building techniques in hot climate zones.

This study evaluates the energy, humidity and indoor air quality implications of residential ventilation cooling in all US IECC climate zones.

Document comparing simulation results from a modified version of the EnergyGauge program to include various HVAC runtime strategies.

Research study describing experiments run in an unoccupied 1600 square foot house to evaluate the delivered performance as well as the relative performance of a SEER 21 variable capacity heat pump versus a SEER 13 heat pump.

This publication provides a set of best practices for improving indoor air quality in conjunction with energy upgrade work in homes.

Technical report describing the enhancement of energy efficiency in existing buildings through a systems approach, assessing airflow-focused retrofits for improved energy savings and indoor air quality, considering factors like air leakage, distribution system dynamics, duct leakage, and ventilation...

This report evaluates the performance of variable-capacity comfort systems, with a focus on inverter-driven, variable-capacity systems, as well as proposed system enhancements.

Document reviewing four cold-climate northern Illinois energy efficiency retrofit programs to identify practices, tools, and approaches to streamline and reduce costs of comprehensive retrofits, and to improve the consistency of audit and retrofit delivery practices across different programs.

Report evaluating opportunities to improve and streamline delivery of residential retrofit measures.

Technical report describing the evaluation of four different ventilation strategies for providing make-up air in high-performance, new construction multifamily buildings in the Northeast, emphasizing the challenges posed by increasing airtightness standards and the variability of system performance...

Report on the performance of range hood exhaust fans.

Expert meeting describing meeting details for recommendations for applying water heaters in combination space and domestic water heating systems.

Expert meeting held to discuss simplified space conditioning systems in low load homes, including the relationship between advanced thermal enclosures, space conditioning systems and comfort.

Expert meeting held to review and discuss results and future plans for research to improve the performance of hydronic heating systems using condensing boilers and baseboard convectors.

Fact sheet describing indoor air quality (IAQ), including information on common sources of indoor air pollutants and best practices for improving IAQ.

Information sheet providing detail about hand fabrication of a one-piece straight duct from a 48" x 120" x 1" thick (1.22 m x 3.05 m x 25 mm) sheet where the total inside duct dimensions equals 112" (2.84 m) or less.

Report outlining how Smart ventilation controls (SVC) balance energy consumption, comfort, and IAQ by optimizing mechanical ventilation operation to reduce the heating and/or cooling loads, improve management of indoor moisture, and maintain IAQ equivalence according to ASHRAE 62.2.

Technical report on a field validation study that utilizes low-cost indoor air quality sensors to assess a smart ventilation system's effectiveness in maintaining acceptable indoor humidity in low-load homes in humid environments, revealing that while the smart ventilation algorithm demonstrated...

ASHRAE Q&A addressing HVAC filtration and disinfection for reducing the spread of COVID-19.

Standard providing a comprehensive approach to evaluating, selecting, specifying and installing flexible duct in HVAC systems.

Page describing in detail four important actions you should consider to protect your health and indoor air quality (IAQ) when cleaning up after a flood.

Detailed information about Formaldehyde including health effects and strategies to reduce exposure.

Results from a research program testing airtightness, implications of air leakage and contaminant reduction over the garage-to-house interface.

Document describing the emissions criteria for carpets, cushions, and adhesives to qualify as those with low volatile organic compound (VOC) emissions under the Carpet and Rug Institute's Green Label Plus Indoor Air Quality Testing Program.

Report about opportunities for ventilation when traditional methods are limited by weather conditions or by contaminants in the outdoor air.

Webpage describing how to guard homes and properties against wildfire, as well as what to do during a wildfire, whether sheltering in place or attempting evacuation.

Presentation about proper installation of flexible ducts.

Report about indoor air quality related to indoor mold growth.

Webpage that describes health problems that can be caused by secondhand smoke.

Article describing the impact of stack effect on building performance, highlighting how pressure differences caused by temperature and height affect air infiltration and exfiltration, and detailing strategies like compartmentalization and distributed mechanical systems to manage airflow and maintain...

Article describing considerations for choosing a room-level air cleaner to improve indoor air quality.

Companion document to the Indoor airPLUS Construction Specifications, providing guidance on identifying compliant products, including industry databases and examples of product labeling.