Library

A supplement to the 2012 Florida Building Code on energy efficiency and conservation.

Web page describing essential guidelines and recommendations for optimal installation of ductless heat pumps in cold climates, ensuring maximum heating performance and long-term satisfaction for homeowners, supported by research-backed insights and detailed resources.

Standard outlining industry procedure for sizing residential duct systems.

Standard providing guidance on how to select, size, and locate the supply air diffusers, grilles and registers, and the return grilles.

Technical manual from ACCA outlining correct methods for zoning of residential HVAC systems.

Fact sheet describing best strategies to bring ductwork on single-story homes with a slab-on-grade foundation in hot, dry climates into the conditioned envelope of the home intending to highlight the pros and cons of multiple ductwork integration strategies, including traditional duct systems in...

Standard for use and reference by designers, architects, engineers, contractors, installers and users for evaluating, selecting, specifying and properly installing flexible duct in heating and air conditioning systems.

Fact sheet describing air-sealing concerns and remedies, including HRV/ERV installation, caulking, spray foam, and weatherstrip installation.

Standard covering updates to the expected leakage rates for ductwork constructed to the SMACNA HVAC Duct Construction Standards—Metal & Flexible, duct leakage test procedures; includes recommendations on use of leakage testing, types of test apparatus, and test setup and sample leakage analysis.

A publication highlighting recommendations that contribute to improved overall performance in the structural shell and focus on good connection details to tie together exterior walls, roofs and floors.

Standard establishing test methods for determining air leakage in duct systems using fan pressurization in low-rise residential and commercial buildings.

Training manual on how to locate ducts within conditioned space and compact design.

Information sheet containing images and descriptions of cantilevers.

Carpet and Rug Institute website homepage.

Manual showing duct cleaning contractors how to identify the different types of insulated air ducts, how to open each type for access by cleaning equipment and personnel, how to close and seal openings after cleaning.

Website discussing building foundation problems caused by settling soil in Colorado.

Information guide describing issues with concrete floors, in multiple climate zones.

Document discussing moisture considerations and testing techniques for concrete floors.

This study focuses on the design, construction, and performance of the interior chase approach as implemented by five different builders in Texas, North Carolina, and Florida.

Information sheet with HVAC duct insulation, testing, maintenance and performance information.

Information sheet providing detail about hand fabrication of a one-piece straight duct from a 48" x 120" x 1" thick (1.22 m x 3.05 m x 25 mm) sheet where the total inside duct dimensions equals 112" (2.84 m) or less.

Standard providing a comprehensive approach to evaluating, selecting, specifying and installing flexible duct in HVAC systems.

Link to all versions of ASCE/SEI 24, a standard describing the minimum requirements and expected performance for the siting and design and construction of buildings and structures in flood hazard areas that are subject to building code requirements.

Document describing the emissions criteria for carpets, cushions, and adhesives to qualify as those with low volatile organic compound (VOC) emissions under the Carpet and Rug Institute's Green Label Plus Indoor Air Quality Testing Program.

Presentation about proper installation of flexible ducts.

Standards criteria supporting ICC HVAC duct support standards.

Report showing installers how to attach ducts, pipes, and associated equipment to buildings to minimize earthquake damage.

Report describing as-found interior platform return plenums, the magnitude of their contribution to the total amount of duct leakage, and techniques and results of retrofits executed by the HVAC trade during equipment replacement.

Fact sheet defining “lowest floor,” identifying common construction practices that are violations of NFIP regulations, and discussing benefits of exceeding the NFIP minimum building elevation requirements; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact...

Factsheet describing how to test the duct leakage of a manufactured home in the manufactured home factory.

Standard that prescribes a testing method to determine the efficiency of space heating and/or cooling thermal distribution systems under seasonal and design conditions. This version of the standard was published in the year 2014, and is available for preview and purchase at the reference link. The...

Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow. Results indicate that utilizing air-permeable fibrous fill insulations in unvented...

Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow; results indicate that utilizing air-permeable fibrous fill insulations in unvented...

Conference paper making the case that moving ducts to conditioned space saves energy, is practical for production builders (when accompanied by careful pre-planning), and creates significant andmarketable energy savings for homebuyers.

Glossary of terms used by the National Flood Insurance Program

This report is designed to meet ASHRAE 62.2-2010/2013 and ANSI/ACCA’s 5 QI-2015 protocol, thereby improving the performance of HVAC equipment in new homes when compared to homes built to minimum code.

Guide providing information on controlling attic ductwork sweating.

Fact sheet describing a novel, simplified air delivery system using a plug-and-play model that features 3-inch diameter flexible ducts, efficient fittings, and a simplified installation process that resulted in successful market engagement through commercialization.

Information sheet including a checklist of steps to follow for pouring concrete.

Webpage containing downloadable fact sheets covering carpet-related topics including Indoor Air Quality, Asthma and Allergy, Cleaning Products, and Environmental Sustainability.

Report proposes high performance duct measures for inclusion in California Title 24 building energy efficiency standards for 2016.

Article describing how insulating and air sealing unfinished attic spaces can lead to reduced energy bills in some homes.

Website with consumer information about duct cleaning.

How hard can it be to insulate a flat sheet of concrete? I mean you only have three choices – on the top, on the bottom, or on the edge. OK, you might have some combination of the three as well.

Manual that identifies certain leakage limits for ducts and outlines procedures for testing ducts for conformity with air leakage limits that are set forth in a designer’s project specification.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

This Standard provides a consistent, uniform methodology for evaluating the airtightness of building envelopes and heating and cooling air ducts and the air flows of mechanical ventilation systems.

Standard providing industry-backed information for assessing new and existing HVAC systems, evaluating and verifying the cleanliness of HVAC system components, preventing job related hazards and guiding the cleaning and restoration of HVAC systems to a specific level of cleanliness.

Information sheet describing transfer ducts and grilles for HVAC.

Guide providing information on controlling attic ductwork sweating.