Library

Standard specification covering the properties of a cured single- or multicomponent cold-applied elastomeric joint sealant for sealing, caulking, or glazing operations on buildings, plazas, and decks for vehicular or pedestrian use, and types of construction other than highway and airfield pavements...

Test method designed to calculate an assigned air permeance of flexible sheet or rigid panel-type materials at a reference air pressure differential of 75 Pa which was published in the year 2021 and is available for preview and purchase at the reference link.

Standard describing a test method measuring air-leakage rates through a building envelope under controlled pressurization and de-pressurization which was published in the year 2019 and is available for preview and purchase at the reference link.

Test method providing a rapid means of determining the steady-state thermal transmission properties of thermal insulations and other materials with a high level of accuracy when the apparatus has been calibrated appropriately. This version of the standard was published in the year 2021 and is...

Test method designed to obtain reliable values for the WVTR of plastic film and sheeting which was published in the year 2020 and is available for preview and purchase at the reference link.

Standard describing two techniques for measuring air leakage rates through a building envelope in buildings that may be configured to a single zone which was published in the year 2022 and is available for preview and purchase at the reference link.

Report addressing barriers to information, contractor resources and cost savings associated with steam balancing multifamily buildings.

Report about results of 10 test buildings in Chicago, studied to identify best practices for methodology, typical costs, and energy savings associated with steam system balancing.

Website providing information on all types of pest management for multi-family housing.

Document describing correct construction of swales, designed to trap particulate pollutants (suspended solids and trace metals), promote infiltration, and reduce the flow velocity of storm water runoff.

ENERGY STAR webpage describing the benefits of storm windows and a link to a product list.

Webpage providing an ENERGY STAR climate zone map and criteria for ENERGY STAR storm windows per climate zone.

Report providing information based on research and case studies, to remodelers and consumers about opportunities to increase home energy performance.

Report about the impact on the loads when common safety factors are applied to the load calculation process using two houses that meet the 2009 IECC prescriptive path modeled as the accurate baseline.

Report following the evolution of the construction quality process from its development for new homes to its application construction of a HPH with enhanced specifications, and its application in a crawlspace renovation.

Document explaining the benefits of evaluating and identifying energy efficiency retrofit measures that could be made during renovation and maintenance of multifamily buildings.

Document offering methods to greatly reduce lighting energy use through the application of high quality fluorescent and light emitting diode (LED) technologies.

Report describing the equipment selection of a split system air conditioner and furnace for an example house in Chicago, Illinois, as well as a heat pump system for an example house in Orlando, Florida.

Document targeting retrofit program managers, retrofit contractors, policy makers, academic researchers, and non-governmental organizations that work to realize energy savings from home energy upgrades (HEUs).

Report about proper water heater selection developed to provide step-by-step procedures for evaluating preferred cost-effective options for energy efficient water heater alternatives based on local utility rates, climate, and anticipated loads.

Research study providing a comparison of selected retrofit activity typically done, versus that same retrofit activity approached from an integrated high performance remodeling and quality management perspective.

Report describing findings from research related to heating, ventilation, and air conditioning (HVAC) companies that have made the decision to transition to whole house performance contracting (WHPC).

Information sheet describing correct application of stucco.

Recovery advisory presenting key wind retrofit guidelines for buildings located in hurricane-prone regions. These retrofit guidelines are intended to help building owners and designers prevent or limit wind damage and water infiltration during high-wind events.

Research project evaluating the pre-and post-retrofit energy consumption of a marine climate retrofit, compare actual energy use to original predictions, and identify opportunities for cost savings in other similar retrofits in this climate.

This document covers a description of the need and applied solutions for supplemental dehumidification in warm-humid climates, especially for energy efficient homes where the sensible cooling load has been dramatically reduced.

Research study making several recommendations to whole-home program designers and implementers for improving the cost effectiveness and reach of whole-home programs.

Question and Answer article in Energy Design Update describing the cost and savings benefits of electronically commutated motors (ECMs) for HVAC equipment.

Web page providing information about water use in pools and spas and tips for how to increase water efficiency.

Report providing performance results of a home's heat pump water heater and whole-house dehumidifier over a six-month period.

A guide for homeowners on determining the risks from tornadoes and hurricanes and selecting a safe room type and location, as well as providing detailed plans for safe room construction.

Information for properly sizing gas lines for use with tankless water heaters and other gas appliances.

Fact sheet describing best practices for flashing doors and windows to minimize air and water intrusion.

Document about laboratory testing of five integrated heat pump water heaters (HPWH).

Document about NREL's repository of residential building characteristics and historical energy use data, used to improve accuracy of residential energy analysis tools.

Standard covering minimum required health and safety diagnostics and specifications for BPI's Building Analyst Professional certification.

The Technician's Guide equips practitioners with the knowledge to properly implement all of the measurement procedures required in the HVAC QI Specification.

Brochure describing insulation approaches for homes with slab-on-grade floors.

Brochure with information about how to select and install house wrap and other weather-resistive barriers.

This TechNote provides an overview of building code requirements and best practices for flashing at window and door frames.

Research study exploring retrofit procedures and simulated post-occupancy data for three homes in an effort to determine the effectiveness of retrofit packages.

Report using data from various sources to characterize the impact on human health and property damage from indoor environmental quality and other hazards.

Webpage describing the standards, seminars, exams, etc regarding testing, adjusting and balancing (TAB).

Article describing a research study exploring how effective interior insulation systems are at keeping basements dry and warm.

Article outlining the importance of keeping dryer exhaust ducts clean.

A field guide with residential construction best practices.

Standard providing industry-backed information for assessing new and existing HVAC systems, evaluating and verifying the cleanliness of HVAC system components, preventing job related hazards and guiding the cleaning and restoration of HVAC systems to a specific level of cleanliness.

Report providing a strengths, weaknesses, opportunities, and threats (SWOT) analysis inherent to different models as a way of thinking about the transition from traditional business models into a viable model for delivering deep energy retrofits.

Paper that illustrates a performance check between the thermal performance of a Massive Insulating Concrete Form (ICF) wall system mocked up and Whole Building Performance criteria such as total space heating and cooling loads (thermal comfort).

Report developed for Habitat for Humanity about lessons learned from demonstration retrofit projects undertaken by Habitat for Humanity affiliates in New York, Maryland, and Pennsylvania; with building systems consulting and technical assistance provided by Steven Winter Associates.