Library

Report providing builders in marine climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Report telling consumers the risks of radon, how radon gets into a home, and steps consumers can take to reduce radon exposure in their homes.

Document describing three methods for elevating a home out of the flood zone.

Fact sheet describing air-sealing concerns and remedies, including HRV/ERV installation, caulking, spray foam, and weatherstrip installation.

Article describing how to stop air leaks around the windows and doors of a home.

Information sheet from FEMA on preparation for extreme heat, including measures for keeping homes cool.

This Best Practices Manual is the product of Hammer & Hand’s ongoing work to document and internally codify our standard operating procedures for construction practice.

Information sheet about soil gas control strategies for foundations.

Document providing guidance to U.S. home builders who want to accept the challenge.

Guide describing measures that builders in the cold and very cold climates can take to build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Guidance document providing BA research teams and partners with specific information and approaches to identifying and overcoming potential barriers to Building America (BA) innovations arising in and/or stemming from codes, standards, and rating methods.

Report summarizing research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Marine Climate Region on a cost-neutral basis.

Document detailing how to build radon-resistant homes.

Report outlining the steps developers can take to create high-performance standards on a community-wide scale.

Report telling consumers how radon gets into a home and how to reduce radon entry into a home.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Design and Construction Process chapter provides detailed guidance for each process phase: pre-planning, planning, construction, test-out and post-occupancy.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Lessons Learned chapter focuses on successful deep energy retrofit projects throughout the U.S.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Occupant Behavior chapter discusses how to assess homeowner behavior patterns and use these patterns to enhance overall energy savings.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Reducing costs and Increasing Cost-Effectiveness chapter provides suggestions for controlling deep retrofit costs, including both 'do's' and 'don'ts'.

Fact sheet describing weatherstripping materials, types, expected life expectancy, installation requirements, and pros and cons.

Online textbook describing energy, including energy types, and energy use in homes.

ENERGY STAR specifications for residential window, door and skylights, Version 6, effective January 1, 2015.

Fact sheet discussing safe room and storm shelter door assemblies along with ICC® 500 compliance.

A website containing FEMA publications on safe rooms for both residential and community use.

Report comparing a high-performance house with a code-built control home.

Report describing dry floodproofing technologies for non-residential buildings, including information about regulatory requirements, design considerations, and descriptions of floodproofing methods and equipment.

Factsheet describing garage door pressure rating requirements in high wind– prone areas.

Website describing results of research on impacts to garage doors from hurricanes, tornadoes, and high wind events.

Homeowner guidance from EPA, FEMA, HUD, and NIH on dealing with radon following a natural disaster.

Website blog with guidance about calculating heat-loss.

Central return designs require an open pathway between the room and the heart of the house where the return grill is located.

Website providing the technical specifications and related documents for home builders, subcontractors, architects, and other housing professionals interested in certifying a home to the EPA's Indoor airPLUS program requirements.

Report describing ways to retrofit a home to make it more hurricane resistant.

EPA’s 2008 Lead-Based Paint Renovation, Repair and Painting (RRP) Rule (as amended in 2010 and 2011), aims to protect the public from lead-based paint hazards associated with renovation, repair and painting activities.

The purpose of this map is to assist national, state and local organizations to target their resources and to implement radon-resistant building codes.

Article describing the flashing of roofs and what to look for, targeted at home inspectors.

Article describing mulching with lawn clippings.

Report discussing development of scopes of work and quality management for builders in mixed-humid climates.

Report investigating what motivates remodelers to become energy-focused and what technical knowledge that need to be energy-focused.

Report presenting ways public housing authorities (PHAs) can develop packages of energy efficiency retrofit measures the PHAs can cost-effectively implement with their own staff in the normal course of housing operations at the time when units are refurbished between occupancies.

Report designed to help a builder understand quality management and its role in transitioning from conventional to HPH building and remodeling.

Website explaining the risks associated with radon in homes and how to protect homes against radon.

Standard providing information on contractors who offer radon control services to homeowners.

Website with information about radon-resistant construction techniques and other radon resources for builders, contractors and homebuyers.

Worker guidance from EPA, HUD, NIH, and OSHA for radon issues following a natural disaster.

Fact sheet describing residential tornado safe room doors.

Fact sheet describing methods for flashing and air-sealing windows and doors.

Information sheet about window retrofit strategies for hot-dry climates.

Manual describing the installation process for Craneboard insulated vinyl siding; while installation is similar across insulated vinyl siding products, see manufacturers for specific guidance.

Standard establishing requirements for the performance and installation of gasketing systems including mortised to doors, frames or both which was published in the year 2021 and a can be purchased to be viewed in full from the ANSI webstore in the link.